1 / 10
XT60H connector housing with strain relief
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Housing for XT60H M-F connectors for more protection
- Rating
- 0 / 5
- Likes
- 31
- Downloads
- 275
- Makes
- 2
- Views
- 867
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple housing with additional strain relief for XT60H connectors - one version for both male and female.
You can solder two separate wires up to 12AWG (outer diameter of cables - 4.5mm MAX) or one “2-core cable”.
Make sure to dry-fit the enclosure because not every connector is equal in dimensions (especially the fake ones), and check that the two halves touch each other where you apply the CA glue.
I printed the objects with ABS at 240/100° with 15% infill (0.6 nozzle and 0.3 LH). Use supports on build plate only.