XT60/LiPo Caps/Covers Set (Full, Half, Empty, Storage)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Protection covers for standard XT60 battery connectors (LiPo), you can also use color change to make them more contrast
- Rating
- 5 / 5
- Likes
- 89
- Downloads
- 295
- Makes
- 7
- Views
- 1,468
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Public Domain
There are two version: SpringyWalls (recommended) and regular ThickWalls.
Make sure to turn on thin walls detection for the springy walls version.
My settings
Nozzle: 0.4mm
Layer Height: 0.30mm
Quality: Draft
Supports: No
Colored version
change filament on layers #4 and #7
https://help.prusa3d.com/ja/article/color-change_1687
Print Orientation
Flip models upside down so they are printed face down on the plate ("F" in PrusaSlicer) – they'll look great and won't require any supports
Tightness Adjustment
All printers and filaments are different, you might need to adjust scale of the caps to achieve perfect fit.
I suggest you print one piece first and try it. If it's too tight – upscale a tiny bit, if too lose – downscale. After finding the perfect fit – print as many as you need. The difference between perfect and acceptable fit can be 0.10-0.20mm, which is only 1-2% up or down.
Please come back and Like🤍 if it worked for you