XT60/LiPo Caps/Covers Set (Full, Half, Empty, Storage)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Protection covers for standard XT60 battery connectors (LiPo), you can also use color change to make them more contrast
- Ocena
- 5 / 5
- Polubienia
- 89
- Pobrania
- 295
- Wydruki
- 7
- Wyświetlenia
- 1468
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Public Domain
There are two version: SpringyWalls (recommended) and regular ThickWalls.
Make sure to turn on thin walls detection for the springy walls version.
My settings
Nozzle: 0.4mm
Layer Height: 0.30mm
Quality: Draft
Supports: No
Colored version
change filament on layers #4 and #7
https://help.prusa3d.com/ja/article/color-change_1687
Print Orientation
Flip models upside down so they are printed face down on the plate ("F" in PrusaSlicer) – they'll look great and won't require any supports
Tightness Adjustment
All printers and filaments are different, you might need to adjust scale of the caps to achieve perfect fit.
I suggest you print one piece first and try it. If it's too tight – upscale a tiny bit, if too lose – downscale. After finding the perfect fit – print as many as you need. The difference between perfect and acceptable fit can be 0.10-0.20mm, which is only 1-2% up or down.
Please come back and Like🤍 if it worked for you