257 models
This is an Mount for a GoPro Hero 8/9 suited for the Iflight XL5 Frame like the Nazgul 5 and the XL7, DC5/7. I printed it without support with a resolution of 0,2mm. You might need to drill the holes for the mounting screws to a bigger…
Created by Rene Skøtt, this simple but beautiful mount was created to stand abuse from the freestyle life. The design is well thought, giving extra support to those parts that tend to break apart. iFlight tends to have kind of a standard…
A GOKU GM10 Pro V3 GPS holder that fits the original parts of iFlight Chimera 7 Pro V2 backend. It is designed so that the GPS can be slid into the holder although it's a tight fit. Also has a lip on the top for extra protection. Print in…
nazgul xl5 mount crossfire buzzer gps PS. Mogę wydrukować i wysłać na terenie Polski.
Tested on my HSKRC XL Frame (XL9 Arms), which is very close to the iFlight XL7. Standoffs in my case are 5mm (which could differ from the iFlight model), so the holes are tailored to that size. I added a TBS crossfire antenna holder to…
Print in TPU, use OEM Screws
I designed this adapter since I wasn't satisfied with the online available ones. I am using a Nazgul5 V2 with its XL5 V5 frame and an ExpressLRS 2.4GHz T-Antenna by HappyModel. To get the antenna into the printed part you might have to…
This is a remix of Armatures design (Thing: 4819929). They had already designed what seems to be a perfect replacement for the official iFlight gopro mount for the Chimera 7. The only issue I had is it didn't feature a countersunk hole…
Description in progress. I used to have a Chimera 7 frame, but I lost it some time ago when I was flying long-range. I bought a Chimera 7 Pro V2 and then realized that its panels are designed specifically for small iFlight7 FC boards and…
FPV SpeedyBee Mario 5 Custom TPU with follow parts: XT60 iFlight BLITZ M10 GPS V2 2 x SMA vertikal ELRS Antenna mount Short Video about this model you can find hier:
two types of antenna mounts ExpressLRS
-I recommend printing from PETG with 100% infill. -The part is not symmetrical, you will need to reflect the 2nd half in the slicer. -I use Hobbywing 65A G2, most likely it will fit other ESC
Set of parts I created to replace the original TPU parts for the 5" iFlight Cidora SL5 V2.1. To print the right hand arm guard, just mirror the left hand one in the slicer.
I designed and created two components: a camera mount with a TPU soft mount and a GPS/antenna mount. The camera mount itself was printed in PETG, while the soft mount was printed in TPU with 100% infill. The original DJI cable was…
This is a geometric place holder for the Iflight Xing 2814 BLDC drone motor found at this link: https://www.aliexpress.com/i/2251832842961091.html?gatewayAdapt=4itemAdapt The motor placeholder should be true to scale on all major external…
I needed something to keep the snow from packing into the frame during snowy winter flights (mostly takeoffs and landings) in the Rockies. These panels are designed to cover the sides. They clip securely into the existing frame parts.…
Replacement arm protector for iFlight's Nazgul Evoque F5 (V2) Print in TPU No supports required
A GPS mount for the nazgul XL10 v6 (chimera 7) frame tpu, that fits a m1025-DQ GPS module from GEPRC allows routing of the connector through the casing, along with a opening for the barometer.
Simple mount for Nameless RC Naked 9 / 10 / 11 for common GoPro mount and iFlight mount. I design with wireslot for betaFPV bt2.0 connector. Secure with the long m2 screw comming with the NLRC kit. Category: 3D Printing
This GoPro mount fits the GoPro Hero 9, GoPro Hero 10, GoPro Hero 11. With an insert for TBS ND filter
Here's a temporary replacement arm for a Nazgul 5 drone, It works OK while you are waiting for a real replacement, doesn't survive crashes though, so print a few if you're as poor a drone pilot as me! Print instructions PLA 60% infill -…
Side plates for the iFlight Nazgul V5. Provides a bit more protection to the electronics without adding much weight. Provides a port to easily insert a magnetic USB cable such as this one:…
The original iFlight XL10 GPS holder is for GPS modules with smaller antennas. I used the Foxeer M10Q-250 which has a bigger size of 25x25x8. This adapter fits the original end part from iFlight. Print at an angle (see pictures).
**Work in Progress** Tested** *Updated - May.25.23 *Made For iFlight Chimera7 Pro V2. Can fit other 7-7.5 inch models, Verify yourself** • Prop Guards V6.4 - I added MT30 Connector Holders with 2 Zip Ties slopes. • Prop Guards V6.3 - I…
Standoff spacing is 21mm. Standoff height is 28mm if your frame is not the nazgul and you want to match it. This mount was meant to reduce vibrations caused by the antenna, so I printed mine with PETG. It is very stiff and doesn't flex,…
Mount for IFLIGHT FPV BLITZ M10
Holder for GPS, VTX Antennas (in my case DJI O3, but others with SMA adapters also work) and a fixed XT-60 for easy plug in of the battery. Print the main part in TPU and two spacers in a rigid material like PETG or PLA. The advantage of…
This is a rear mount for both a BN220 GPS unit & a TBS crossfire immortal antenna to fit the iFlight XL5V5 frame (Drones such as the Nazgul5). Unlike others out there, this doesn't replace any of the existing parts. The rear frame bars…
Made a new mount for a cheaper M10 GPS from TBS for the iFlight Nazgul Evouqe F5. Print Settings: TPU 5 walls 35% Infill 5mm brim for stability Print like shown on the picture
I like the Vifly Finder 2 Buzzer for being cheap, functional and reliable as far as I can tell Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 0.2 Infill: 30% Filament: SainSmart TPU emerald Notes:…
This is a remix. Changed it so that it fits in front of the Nazgul V4 and V5. Fits every other 6mm standoff. Dimensions from hole to hole are 24.5mm. It also fits in the back if you squished the arms together. I found out after printing…
I mounted a radiomaster DBR4 receiver on my Chimera 7 pro V2, so I had to place two more antenna on it. I decided to place them vertically on the back of the drone to avoid beeing on the same plane than the one mounted horizontally on the…
2xFrame and one of each TPU parts is needed. The mount uses the stock bolts (M3x6 top and bottom, M3x10 for the front bar).
Print with TPU as the model does need to bend to fit. Does not need supports. Set 0 bottom layers to make the infill visible to make fancy patterns.
Shark Fin for the iFlight iX5. Designed it to be as high as the Foxeer Lollipop which I have mounted on the back. There are 2 versions; with and without middle holes. The middle holes let you attach the fin more firmly to the top plate.…
Front antenna mount for iFlight Chimera 7 Pro V2. Used this for my build and the ELRS 2.4 GHz diversity receiver. Best print in TPU You need longer screws. I used M3x10 instead of the M3x6
Tail mount for iFlight Chimera 7 frame. Includes space for DJI air unit dual RP-SMA connectors, TrueRC Bardpole, BN880 GPS, and TBS Crossfire diversity RX. Thing contains two versions, one with cutout for power to be brought topside via…
Iflight GoPro 8 decased mount for AOS 3.5 Category: Hobby
Works great with Iflight Mach R5. Sides and bottom not visible on camera! The lifted version (3,5mm lift) is the best in my opinion. more protection under and props get a bit more out of the way. 28mm stud distance. 5mm studs. works with…
iflight commando 8 gimbal protection
Tpu parts to mount gopro camera, Iflight FC07704 gps module and tbs immortal t antenna. Printed in prima easyprint tpu 95A. with 0.6mm nozzle, 0.3 layerheight. 230 degrees c nozzle. 50 degrees c bed. 40% grid infill. Assembly parts. 2x…
The stock tailpiece for the iFlight Nazgul Eco frame had an angled XT60 connector, which made it impossible to position LiPos with short wires properly. This set has original XT60 and SMA connectors in better positions and has space for a…
print in tpu or petg - no support needed Category: 3D Printing
A CRSF + FlyFishRC M10 mini GPS holder for the iFlight Nazgul Evoque frame based on my base GPS holder and DJIBryan 's excellent holders for other GPS units .
Printed in TPU For the Project Synthara
print in TPU Category: 3D Printing
IFLIGHT TITAN DC5 V1.4 HD Gopro Mount
printed with filamentum TPU Category: 3D Printing
The Iflight BOB57 has been known to have heating issues of the O3 air unit during flight. This side panel is designed with 1 thing in mind - to provide better airflow to the dji o3 air unit to prevent it from heatiung up during flights…
iFlight XT60 mount Category: R/C Vehicles
I wanted to update my iFlight Nazgul Eco 5 DC with a DJI O4 Pro system, so I have no need for the camera mount up front anymore. I tried to find free STLs of any modification like that, but found only paid options. So I just made my own!…
og link: https://iflightrc.freshdesk.com/support/solutions/articles/48001238224-nazgul5-v3
What was supposed to be a 5 minute placeholder model ended up becoming a whole ass project... Spent waaay more time one this than I should have. Windings could be better, but it's good enough for government work. Oh and the text on the…
Mount for iFlight GP8 Category: 3D Printing
This mount can be used almost any iFlight Frame from 5" to 7" (like XL, DC, Cidora, Chimera, etc) with a rear standoff distance of 25mm. Print Settings Printer: Delta Rafts: No Supports: Yes Resolution: 200 Infill: 15 Filament: Any TPU…
This moves the GPS/MAG further back and up to reduce noise from the motors, since iNav autonomous flight features relies on the magnetometer. It works fine, but could probably use some refinement so I included the file in a few formats…
Mount for FPV BLITZ M10 AOS CINE35, O3 antenna and antenna transmitters
I did not found any solution for vertical mount this case. so i decided to rebuild it complete from sketch. i also aligned the brackets with lens center. you can use all iflight hardware (bec and screws) also original flight tpu…
This is a mount for the DJI Action 2 camera on the iFlight Nazgul5 v3. It provides a good amount of protection and fits the DJI Action 2 camera with magnetic ND filters like in the picture. In my case the ND filters are from Neewer but it…
Armguard for iFlight Nazgul5 V2 fits nearly perfect for my Nazgul5 V2 Print Settings Printer: Sidewinder x1 Rafts: No **Supports:** Yes Resolution: 0.2 layer hight **Infill:** 20 Filament: Geeetech TPU Category: 3D Printer Parts
can be print without support i used tpu you need a zip tie
This is an antenna mount for Iflight XL5 frame for walksnail V2 vtx stock antenna
Did not find an GPS holder which fits my needs so i designed a new one. I used TPU printing this, and double-sided tape on the bottom of the GPS module. Fixed with an ziptie, which also fixes the wires underneath. Its a MATEKSYS GPS &…
A full size GoPro Mount for the iFlight Mach R5 race frame Print Settings Printer: Elegoo Neptune 3 Pro Rafts: No Supports: No Infill: 100% Filament: esun TPU Black Category: R/C Vehicles
just a small remix of the original file provided by iflight, just made the walls a bit wider.
This is my Remix from @drunkmaster to use this amazing GoPro mount on an iFlight DC5 or iFlight Megabee. Category: Hobby
Original back mount has GPS and compass really close to VTX antenas and XT60 plurg. That makes compass unusable for navigation modes in INAV. This design pushes GPS and compass further from VTX antennas removes XT60 plug, cleaning up…
A DJI Osmo Action mount for iFlight IX5. I printed this using Frontierfila TPU. Infill: 50 You can find me on Instagram: https://www.instagram.com/vvvfpv/
DJI Osmo Action mount for iFlight XL5 v4 . 4 different models: 10° 25° (with and without hole) 35° I don't know if this fits the older models. Let me know if it fits! Print Settings Printer Brand: Creality Printer: Ender 3 Filament:…
This is an electronics housing for the iFlight Nazgul5 v3. It helps protecting the electronics and provides a cleaner look. Also it feels better when grabbing the drone by hand and gives a more polished overall experience. The holes are…
Made small shark fin for iFlight Nazgul evoque v2. It replaces gopro mount, and also serves as a battery stop. I printed it in TPU 95A, but any fillament would do.
TPU Accessories for the iFlight Chimera4 Includes: ELRS antenna mount - Fits the Happymodel EP1 antenna VTX antenna mount GPS mount - Fits 18x18 GPS like M8N, BN-180
sleeve for nlcr naked gp10 gp11 Category: 3D Printing
my original antenna broke and I couldn't find one as long, so I created a holder that is in front and any antenna can be PLA/PTG/TPU 20-100% no supports
iflight r5 arm guards. best printed in tpu
This is a Remix of an Iflight m10 mount. The difference is that the Space in the mount is bigger so the m10 fits better.
Print in TPU and mount to the top plate, print with the large face down and mirror one copy. If you want easier access to your USB port print the FLOPPY version, it works well but over time has a greater chance of breaking than the STRONG…
Simple Sidemount for the IFlight SL5 V2.1 Frame, all Revisions as of Upload Date. Can be used on any Frame with 20mm Standoffs. I recommend routing the Power Cables infront of the Standoff so it gets pulled inwards by the power cables.…
This adapter was created to mount the XT60 connector at 90° instead of 45°. My batteries (SMC HCL RS and Tattu v6 ST) have very short cables and would just barely reach to the connector. I included a small pocket for the balance plug. It…
Designed to avoid ducts in FOV and absorb vibrations. Print in TPU, no supports needed.
I love the SL5 frame and this a nice way to fit the airunit into the small frame. I remixed the design a butchered a nother antennamount and crossfire aswell. Category: 3D Printing
A mount for the runcam nano 3 to fit the baby nazgul frame from iflight
I wanted to convert my chimera to iNav. In order for compass to work properly I decided to relocate my power cables and to move my gps/compass a bit further away from the electronics. So I designed this mount. Source file…
This is a remix. Changed the antenna placement for the Happymodel ELRS T-style antenna because the antenna comes really close to the props and chances are high that the props will suck the antenna in. I also removed some stuff that are…
This TPU part holds the ExpressLRS receiver, beeper and vertical antenna on a iFlight XL10 frame.
I printed it with TPU using organic supports Fits my HGLRC M100-5883 GPS (21x21mm)
This is a very simple lens cover for a de-cased GoPro Hero 8 in the iFlight case.
Calmps between top and bottom plate, no need of screws. Print in TPU Opening for Air in the front
Auf einer Seite kann man eine M5 Mutter einfügen damit man die schraube besser festziehen kann.
If you like the design please support my work. Even a small tip of 1$ helps. Thank you. paypal.me/GuyWithDrones DJI antenna holder for Iflight Chimera 7 frame. Snaps into the original 3D print for GPS unit.
This is a walksnail Avatar V2 Antenna mount for iFlight Titan XL5 frame. The original model seem to have an error, the mounting holes are too close to each other, it should be ~25mm. This was fixed here, by scaling up the original model…
Skid Guards / Armguards / Bumpers. Scanned from the Stock Guards for the IFlight SL5 V2.1 Frame. Cleaned up and Remodelled from Scratch. Can be printed either upside down with supports or at a 45° Angle without supports Print Settings…
DJI Air Unit bracket for iFlight Titan Frame Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 200 Infill: 38 Filament: PolyMaker PETG Category: R/C Vehicles
TPU printed holder for the RunCam Split 4k. It hlds the Camera and the Board. other Split style cam's could also work. I designed it for the Split 4k. the board is just held in the TPU no Screws needed. the Cam gets mounted normal with…
I had to make this because the v2.0 Bumblebee and Green Hornet ducts are 2 mm wider and 1mm taller compared to the v1.3 ducts that are readily available here on Thingverse. Print Settings Printer Brand: FlashForge Printer: Creator Pro…
Mount for the Air Unit OEM Antenna. Can be additional fixed with a zip tie, but no need to. Standoff-Mid to Standoff-Mid - 21mm Standoff - 6mm inner diameter
for iflight r5 with elrs receiver (i use ep1) and vtx antenna mount
FPV Thrid person view mount for Insta360 GO2. Design is intended to bolt below the drone frame. Length between spacer is (25mm on the XL5 Titan Frame). Comment below if you want differents screw spacing for your specific frame) Hardware…
This is the cable cover for Nazgul 5 and another 5 inch drones
