iFlight Nazgul V5 Side Plates
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Side plates for the iFlight Nazgul V5. Provides a bit more protection to the electronics without adding much weight.
- Rating
- 5 / 5
- Likes
- 30
- Downloads
- 170
- Makes
- 1
- Views
- 2,446
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
Side plates for the iFlight Nazgul V5. Provides a bit more protection to the electronics without adding much weight.
Provides a port to easily insert a magnetic USB cable such as this one: https://www.amazon.com/NetDot-Magnetic-Charging-Transfer-Compatible/dp/B07QDS1WR7/ref=sr_1_10?keywords=magnetic+usb+c+charging+cable+netdot&qid=1639128498&sr=8-10
I highly recommend using some form of flexible filament. I am not sure if the pieces are accurate enough to be printed with PLA or other hard plastics.
To print the right side of the quad print the VTX protector top and bottom, and the FC protector with the port.
For the left side print VTX protector top and bottom, mirror on Y axis, and the FC protector without the port also mirrored on the Y axis.
Print all parts on the flat edge, no supports or anything are required.