1 / 6
Nazgul5 V2 Frame Footpads TPU and PLA
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Print orientation ~45deg as shown in image. There are multiple version with 2 variables wall (H)height and (R)diameter…
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 144
- Makes
- 1
- Views
- 528
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
Print orientation ~45deg as shown in image.
There are multiple version with 2 variables wall (H)height and (R)diameter show as red lines in image. Default is H=5.2mm. Diameter 3.2mm for PLA and 2.8mm for TPU print
Most vanilla TPU print would be "NazgulV2Pad_TPU_WallHeight5.2.stl". H7.2 I think is a bit improved version
If you print PLA usePLA.stl because it has bigger screw hole
Print Settings
Rafts:
No
Resolution:
0.2mm
Infill:
10-15
Notes:
2 perimeters
Category: R/C Vehicles