1 / 6
Nazgul5 V2 Frame Footpads TPU and PLA
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Print orientation ~45deg as shown in image. There are multiple version with 2 variables wall (H)height and (R)diameter…
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 144
- Wydruki
- 1
- Wyświetlenia
- 528
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (18)Powiązane
Print orientation ~45deg as shown in image.
There are multiple version with 2 variables wall (H)height and (R)diameter show as red lines in image. Default is H=5.2mm. Diameter 3.2mm for PLA and 2.8mm for TPU print
Most vanilla TPU print would be "NazgulV2Pad_TPU_WallHeight5.2.stl". H7.2 I think is a bit improved version
If you print PLA usePLA.stl because it has bigger screw hole
Print Settings
Rafts:
No
Resolution:
0.2mm
Infill:
10-15
Notes:
2 perimeters
Category: R/C Vehicles