P
Printables
snowboard footpad
a foot pad for your snowboard.
Search results: footpad
Counting matching models…
P
Printables
XR Stock Footpad Grip Tape Cutout
Stock footpad grip tape cutout shape, measured from TFL Grip Tape for V1/Plus/+XR
P
Printables
XR TFL Kush Hi Footpad Grip Tape Cutout
TFL Kush Hi footpad grip tape cutout shape, measured from TFL Grip Tape for V1/Plus/+XR
P
Printables
Onewheel V1 front concave footpad
This foot pad is mounted over the original front footpad and has a 5mm side to side concave, and about an 11mm lift at the front lip. I printed it standing on the front facing edge with a 10mm brim. It leaves a 2 mm gap between it and the…
P
Printables
Pushy - an XR/Funwheel Footpad
Last photo shows Pushy+wing (left), Pubpad and wing (right) to get a better idea of the concave. Mostly just added a little more ramp to the edges. Sep-08-2025: Realized bad export of the rear pad, uploaded correct file with no hole in it.
P
Printables
Funwheel injection molded footpad mini fender F+R
This the official file for the mini fender to use with the latest Fungineers front and rear footpad.
P
Printables
gx-16 cable boot to replace metal housing - footpad connector
i cut off and reused the collar
P
Printables
Funwheel easy access controller box - gx16 button and footpad, cannon core motor cable, xlr charge port
get your vesc built up in a fungineers easy access printable box, i usually print these in asa.
P
Printables
Onewheel XR/Plus rear footpad improved shape and design files
I wanted to make some changes to the original file, but the orientation of the design was a few degrees off so I wasn't able to work efficiently. Recreated the file with my own preferred shape etc. Fusion 360 design file is included Print…
P
Printables
Fungineers Stompies Footpad XR Close Out with LED Status Light Holder
A close out is required when using the Fungineers Stompies footpads on a standard Onewheel XR. This closeout is compatible with standard rails and fenders. There's also a variant that includes an LED status light holder. Details on how to…
P
Printables
Funwheel Status Bar Cutout Placement For Footpads
A DXF for adding the status bar cutout to footpads intended for use with the Funwheel controller box. Align with the bolt holes for correct placement.
P
Printables
Onewheel Pint S Stand (Pint X with Flared Footpads)
Reverse engineered and customized to fit the Onewheel Pint S (or the Pint X with Flared Footpads) from @venykrid_2240479s “Onewheel Pint X Stand”. Sits at a slight angle to keep the board stable. Includes a sturdy holder for the standard…
P
Printables
Fungineer Stompy Front Footpad
Modified the rear to match a front (stock) stompy. The exception being wire channel distance, which has been repositioned to allow the use of exile or nexus sensors. I print in PETG, 75% infill, and print the lense in clear PETG, 100%…
P
Printables
Onewheel XR footpads with Flight Fins mounts outside
This enables you to reuse your flight fins but mount them on the outside. I found that they still allow you to run-out a nosedive and only make jumping off slightly more inconvenient but you be the judge. I printed these in TPU with 3…
P
Printables
Rear Footpad Grippy Dock for Onewheel GT
Recommended print settings (For dock pads) included a plain one 3 wall loops 3 top/bottom layers (2 for bottom will also work for more squish) 15% honeycomb infill Other recommendations: Use a 0.4mm nozzle to ensure the spikes are printed…
P
Printables
Footpads for metal shelves on rugs
Footpads for metal shelves, specifically for use on rugs. Front footpads are taller, which counteracts the tipping that happens.
P
Printables
Floatwheel ADV Printable Footpads GT Grip
The design started with wanting to utilized the front Float Life GT grip tape that came with my order of the GT Kush grip tape. I also keep having the “ears” of the stock Floatwheel footpads break so I wanted to be able to be able to…
P
Printables
SpeedyBee Mario 5 Screwless TPU Footpads
Made these footpads as a replacement for the injection molded ones that come with the frame. These use no screws and just press in place, allowing for shorter screws to be used to fasten the motors. Needs to be printed in TPU. They are…
P
Printables
Thor300 301 400 Footpad LED Drill Guide
If you want to make a custom front footpad from something like a TFL Kush Wide for the XR style platform. Can be used for an aluminum backing plate and the footpad itself so the Thor301 status LED's from the controller are visible. Works…
P
Printables
Ghetto Wide XR Footpad
Modified Huff Designs PubPad to include KelsoCorp's patented Ghetto Wide topology. Print in 83a TPU with 8-12% honeycomb infill. 6+ solid top layers to avoid bubbling on the surface as seen in some photos. Can be used for the front or the…
P
Printables
Fungineers Stompies Front Footpad Model
Fungineers Stompies front footpad for modeling reference, provided to me by Fungineers. Thank you, Fungineers!
P
Printables
PubGrip for Fungineer's Stompies footpads
Includes a ready-to-print 3MF file which contains front and rear pubgrip ready to print. Also contains some DXF files with outlines, if you'd like to use those together with…
P
Printables
Viper's Wide XR Footpads
These are my low and wide Onewheel XR+ compatible footpads. They are roughly 7mm of concave and a little more kick. They feel fairly flat. For reference, the "lowboy flared" pads are a similar size but something like 10 to 12mm of concave…
P
Printables
TPU Grip Tape for Mushies Footpad
Spiky Grip Tape for Mushies Footpads Material: TPU (I used 95A) Print Settings: Layer Height 0.3mm Nozzle: 0.8mm Walls & Top / Bottom Layers: 3
P
Printables
Tough Pad (Onewheel XR / Funwheel footpad)
Remix of Huff Designs PubPad (Footpad for Funwheel's and XR's) footpad Designed so that a steel plate can be added during printing by pausing the print. plates can be ordered in batches to reduce the price. to get them use these places…
P
Printables
XR Stock Footpad Grip Tape Cutout
Stock footpad grip tape cutout shape, measured from TFL Grip Tape for V1/Plus/+XR
P
Printables
XR TFL Kush Hi Footpad Grip Tape Cutout
TFL Kush Hi footpad grip tape cutout shape, measured from TFL Grip Tape for V1/Plus/+XR
P
Printables
Custom Onewheel Rear Footpad
Printed in ABS as halves and glued together with acetone. Designed to sit on top of a formed 0.09" aluminum 6061 sheet. I am 150 lb so I recommend 1/8" or thicker if you weigh more. Hardware should be the same as the Kush Hi but you will…
P
Printables
Onewheel Rear Footpad V2
Updated rear footpad designed to have thicker walls. Added more fasteners to the front edge to increase stiffness. Made full length version.
P
Printables
OneWheel rear concave footpad
This is a concave foot pad for the onewheel XR. It is compatible with the flightfin fenders. I carved this out, out of plywood, but i guess you can print is as well with a large enough printer. I purposely ommited the mounting holes, as i…
P
Printables
Lack anti-vibration footpad
Wanted some anti-vibration pads under my Lack so I made a nice-ish looking transition for the leg to enclose a pad. The pad used can be found here: https://www.amazon.com/gp/product/B00BVEMLR4 I cut the thing into shape using a chop-saw,…
P
Printables
Nazgul5 V2 Frame Footpads TPU and PLA
Print orientation ~45deg as shown in image. There are multiple version with 2 variables wall (H)height and (R)diameter show as red lines in image. Default is H=5.2mm. Diameter 3.2mm for PLA and 2.8mm for TPU print Most vanilla TPU print…
P
Printables
Onewheel Hall or Footpad Sensor Locking Ring
I've only tested this on the following digikey part, not original FM connectors. So I'm not sure if it works for those. If you give it a try, drop a comment to let others know. digikey conxall-switchcraft 6280-6SG-519 Tips: Print the…
P
Printables
Outdoor Furniture Footpad
We inherited some outdoor furniture, and are in the process of refinishing it all. The legs are iron bars, ½" in diameter with small plastic feet on them to protect the surface on which they sit. All but one of those feet are missing, and…
P
Printables
Onewheel Footpad with Switches
This design is what I ride instead of the typical onewheel footpad that uses a force sensing membrane. Instead this design uses two small IP67 switches . The button is held in place above the switch by the seal, which is 1/32" EPDM (not…
P
Printables
Pint Compatible Footpad Underside Plates
Plates that supports third party footpads to reduce contact with battery box/ controller box. Haven't tested yet, update soon. Category: Toys & Games
P
Printables
HYPERFORMA_Floatwheel ADV-ADVPro 3D Printable Footpads (Original & Wide)
These parts are designed directly on the CAD model provided by Tony from Floatwheel. These are 3D printable versions of the footpads for anyone who wants to replicate them either in the original version or in the wide version . Obviously,…
P
Printables
Onewheel V1 front concave footpad
This foot pad is mounted over the original front footpad and has a 5mm side to side concave, and about an 11mm lift at the front lip. I printed it standing on the front facing edge with a 10mm brim. It leaves a 2 mm gap between it and the…
P
Printables
Onewheel V1 rear concave footpad
This footpad replaces the original rear footpad and has a 7mm side to side concave, and about a 15mm lift at the rear lip. I printed it standing on the front facing edge with an 8mm brim. Print Settings Printer Brand: Anet Printer: A8…
P
Printables
VESC Onewheel footpad and motor connectors
Print it with the most precise nozzle/layer height/wall width you can. BOM : Footpad 3 * PCB pins header (min length 21mm) Motor 6 * PCB pins header (min length 21mm) 3 * 2mm bullet connector Tips : This mount is deisgn to be “locked”…
P
Printables
Floatwheel ADV Footpad
I didnt make this, this is isolated from Tonys construction file. I wanted a softer feel on the rear pad (like the Kush from Floatlife for the Onewheel GT). Obviously dont use this for a front pad setup as it will certainly give sensor…
P
Printables
Rear Footpad V3
A rear footpad for the Onewheel XR platform. Works great in wet, muddy, or icey conditions with a treaded shoe. If you make your own base plate I suggest minimum 0.09" aluminum plate. If you want to buy the base plate I think this is a…
P
Printables
Onewheel GT Footpad Sensor Cable Guide
I designed this to work with TFL Kush Lo footpad as a front footpad, I printed this in ASA for durability.
P
Printables
SNES Rear Rubber Footpad
A small press-fit TPU foot for the NTSC SNES. Simply presses into place and stays there. PLEASE PRINT WITH TPU!
P
Printables
Mushies Footpads for Onewheel XR - VOW systems
Mushies Footpads for Onewheel XR - VOW systems. All credits to VOW systems
P
Printables
Fungineer Stompies Footpad To Flightfins XR/VESC Fender Adapter
This is an adapter plate to allow installing FlightFins XR/VESC Fender with a Fungineer Stompies Footpad Created because the Stompies Footpad was a different profile than I expected, and had a 3d printer to fix that. Uploading here since…
P
Printables
Backer Plate Outline for XR Footpads
Backer plate cutouts to use with front or rear XR footpads. These have either no inset or a 2mm inset from the footpad edge shape. Select/adjust this as you'd like. If you need to convert these to a DXF for machining, I've had good…
P
Printables
Onewheel XR Footpad Mushies (Cable Channel)
This is a remix of (VOW ) Mushies footpads. I just added a simple channel for the footpad cable. It works with all one-wheel sensors. This is the front only if you need the rear footpad to join the Vow Discord for more files. Connect the…
P
Printables
Onewheel XR Textured Rear Footpad
Rear footpad for Onewheel XR with printed grip tape texture. Slide M5 nuts into the rear slots and secure with M5x20 bolts (same as stock). The .3MF file should be used with BambuStudio or OrcaSlicer, and the STL is pre-rotated to the…