1 / 5
Rear Footpad Grippy Dock for Onewheel GT — image 1
1 / 5

Rear Footpad Grippy Dock for Onewheel GT

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A mashup of Siwoz's GrippySheet Onewheel Grip Solution and Kagmans Flared GT Footpad. DO NOT USE FOR FRONT FOOTPAD!!!!!

Rating
0 / 5
Likes
3
Downloads
38
Makes
0
Views
370
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Recommended print settings (For dock pads) included a plain one
3 wall loops
3 top/bottom layers (2 for bottom will also work for more squish)
15% honeycomb infill

Other recommendations: 
Use a 0.4mm nozzle to ensure the spikes are printed well. A 0.5mm nozzle will also work (as pictured)

I recommend printing the spikes in a material different from the base for even more comfort. 83A TPE for the base and 72D TPU for the spikes on the 3mm base version will provide the best grip while providing a soft feeling, similar to using foam backed grip tape


 Recommended print settings (For dock)

i recommend using 98a tpu

30% infill for the bottom half until it gets to the part that sits on the battery, switch to gyroid infill 12% for the rest.

Tags