Rear Footpad Grippy Dock for Onewheel GT
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mashup of Siwoz's GrippySheet Onewheel Grip Solution and Kagmans Flared GT Footpad. DO NOT USE FOR FRONT FOOTPAD!!!!!
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 370
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Recommended print settings (For dock pads) included a plain one
3 wall loops
3 top/bottom layers (2 for bottom will also work for more squish)
15% honeycomb infill
Other recommendations:
Use a 0.4mm nozzle to ensure the spikes are printed well. A 0.5mm nozzle will also work (as pictured)
I recommend printing the spikes in a material different from the base for even more comfort. 83A TPE for the base and 72D TPU for the spikes on the 3mm base version will provide the best grip while providing a soft feeling, similar to using foam backed grip tape
Recommended print settings (For dock)
i recommend using 98a tpu
30% infill for the bottom half until it gets to the part that sits on the battery, switch to gyroid infill 12% for the rest.