Search results: onewheel

Counting matching models…

Printables

mini onewheel pint S

this is a good mini onewheel pint S for your desk or any where else

Printables

ONEWHEEL GT CNC CONTROLLER BOX (COMPATIBLE WITH VOW MUSHIES)

Current Version: 2.3 Tested and currently in use by me on my 24s2p build pictured. BTG WTF rails, 11.5x7 Burris, VOW's V2 battery box. NOTE: THIS BOX REQUIRES A MODIFIED FRONT BANG BUMPER FOR FITMENT . This dual-lid controller box is…

Order a print of this model

Printables

Onewheel XR Battery Mud Guard

Slim battery box mud guard for the Onewheel XR, providing cutouts for the battery harness M20 gland and wires and keeping water and dirt out of your bumpers and battery box edges. Tested with TFL BANG Bumpers and stock bumpers. Could…

Order a print of this model

Printables

Onewheel XR Mini Fenders

Mini fenders that are compatible with TFLs droptop fender for XR. https://thefloatlife.com/products/drop-top-fender-top-only-gt Works with straight rails as is, but you can use the adapter TFL provides to make it work with non-straight…

Order a print of this model

Printables

Dual charger carry solution for OneWheel GT

These are the printable pieces to accommodate two OneWheel GT chargers in one box. Only the box needs modification (side holes drilled and IEC jack). Features… - Space for two GT home chargers - Cooling channels around the chargers - 40mm…

Order a print of this model

Printables

Adjustable VESC Onewheel Stand

Vertical stand with adjustable depth for use with straight rails, angled rails, hooks, bumpers, and more. The “foot” of the stand attaches to the “base” of the stand using: Four M5x20, M5x25, or M5x30 countersunk screws M5 heat set…

Order a print of this model

Printables

Complete Onewheel TFL compatible drop top fender with mudguards for funwheel X7 (or onewheel XR)

Complete Onewheel TFL compatible drop top fender for funwheel X7 (or onewheel XR). The top fender didn't actually fit on my Bambu lab P2S. I printed it on its side on supports and used Bambu Studio to cut the ends off. It won't harm…

Order a print of this model

Printables

Onewheel Funwheel Rim/Hub Protection for 5" hubs 5uperFlux MTE

Scaled down 5" version of Exit7212 's 6"/6.5" rim protector, possibly functionally pointless and mostly intended for stylizing 5uperFlux and MTE hubs. Untested as of 2/12/26, will be tested upon the 5uperFlux motor's release late…

Order a print of this model

Printables

Onewheel Handle 100% Plastic (remoddled Spacer only)

I just remoddled the Spacer Part because NuRxGs version keept breaking on my board when it landed on its side. Onewheel handle 100% plastic by NuRxG - Thingiverse The new spacer handles much better. Print Settings Printer: Renkforce RF…

Order a print of this model

Printables

Onewheel XR footholds Template

a template for making your own Onewheel XR footholds, just drill the holes to match your Onewheel

Order a print of this model

Printables

Onewheel / EUC Bonk block (Brick)

full size brick bonk block for Onewheel / EUC /Bikes etc

Order a print of this model

Printables

Raised Axle Block Wire Cover for OneWheel Pint

provides clearance for extra or thicker cables for various mods.

Order a print of this model

Printables

Onewheel V1 front concave footpad

This foot pad is mounted over the original front footpad and has a 5mm side to side concave, and about an 11mm lift at the front lip. I printed it standing on the front facing edge with a 10mm brim. It leaves a 2 mm gap between it and the…

Order a print of this model

Printables

Lenco Wheel V4 STL files for DIY onewheel

3D printing files for the DIY VESC Lenco Wheel (onewheel). To be used in combination with Lenco Wheel frame kit. https://lencosolutions.nl/webshop/lenco-wheel-frame-kit-v4-complete/ These parts are functional so print them strong. I have…

Order a print of this model

Printables

Funwheel Controller Lid Fungineers Onewheel XR

Funwheel Controller Lid Fungineers Onewheel XR You can laser cut or CNC in polycarbonate

Order a print of this model

Printables

Onewheel Grip Tape DXF outlines

These are just the pads that I own that I can confirm fit on. I made these like a year and a half ago so memory is fuzzy but I made all of them except the stock XR. If anyone remembers where that came from I can tag the OG. Otherwise have…

Order a print of this model

Printables

Onewheel Pint(X) Lower Controller Housing

!OBLIGATORY WARNING! Create and use this at your own risk. This model has been tested on my own Pint however I cannot guarantee this will be rugged enough to sustain your own use case. Printing in materials that do not deform at low temps…

Order a print of this model

Printables

Onewheel Pint & PintX Half Fender Side Trim

Onewheel Pint & PintX half fender side trim. I designed these side trims to protect the top of the rail when installing Onewheel Pint & Pint X half fenders like the ones created by NuRxG. They can be printed in PLA or PETG. I then used a…

Order a print of this model

Printables

Onewheel Pintx wall mount

Printed with PETG 5 wall loops 30% gyroid sparse infill Seems to be holding the weight great To mount the board, lay it flat on top the mount, and rotate it into place. Let me know if it fits any other boards other than the pint x

Order a print of this model

Printables

WheelStand (Onewheel GT roller attachment)

UPDATED WHEELSTAND 2.0: https://www.printables.com/model/1084250-wheelstand-20-onewheel-roller-attachment Tired of carrying your Onewheel GT through grocery stores? Roll it around like a suitcase with the Wheelstand! Includes an…

Order a print of this model

Printables

Mini Onewheel Finger Board.

A simple Onewheel finger board with no suports needed, and only need hot glue or other glue to assemble.

Order a print of this model

Printables

AirTag Mount for Onewheel Pint X / S

I wanted to hide an Apple AirTag inside my Onewheel Pint S somehow, so I took it apart, identified the best location, and this is what I came up with. I had two goals in mind for this project: 1) Find a spot within the Pint X / S where an…

Order a print of this model

Printables

gripple for onewheel

easy aggressive gripple for any onewheel.

Order a print of this model

Printables

Onewheel XR Railsword Hilt

Simple hilt i designed and recently improved. takes 10/32 heat set threaded inserts for attachment into the rail!

Order a print of this model

Printables

ModDelete - Onewheel XR Fender Delete

A set of fender delete components (centers+spacers) compatible with onewheel XR/+ and funwheel. This particular set matches the edge geometries of the Huff Designs PubPad or my remixed “Pushy” version. The “center” pieces allow for the…

Order a print of this model

Printables

Onewheel Pint Flight Fender + Shield

IMPORTANT NOTICE I do not keep my designs updated on printables anymore. To ensure you download the the most up-to-date model, please visit this design on my makerworld account: https://makerworld.com/en/models/646144#profileId-572369…

Order a print of this model

Printables

Onewheel Pint Mini Split Fender Delete

IMPORTANT NOTICE I do not keep my designs updated on printables anymore. To ensure you download the the most up-to-date models, please visit this design on my makerworld account: https://makerworld.com/en/models/445642#profileId-352107…

Order a print of this model

Printables

Onewheel GT Mini Split Fender

Order a print of this model

Printables

Short / mini fenders for Onewheel XR

I remixed the thing:4940594 because it was simply wrong. I have not tested/printed mine yet but I will soon. After some measurements It should be ok with the stock foodpads. I printed the originals with PLA colorless and the kind of…

Order a print of this model

Printables

OneWheel Stand

This is just my own version of https://www.thingiverse.com/thing:4387947 It is exactly the same piece, just wider and with 2 holes for the logo plate. But...then I realized that I cannot print it with my Ender3, it is just too big ( but I…

Order a print of this model

Printables

Helmet holder for Onewheel XR

Hi all, I made a remix from this thing:2641409 which I want to share. I think it's a cool helmet holder for my OW XR. It is basically the same flat hand, with 2 changes : -On the fingers' length -to put them at the same height for…

Order a print of this model

Printables

Onewheel XR plug holder ( when charging )

I made this VERY simple Onewheel plug holder for the cable of the charger. This is because I lost missplaced already one plug and I don't want this to happen again. The gap is very tight ( on purpose ), so a bit of sanding might be…

Order a print of this model

Printables

Onewheel XR+ main axis cover

This is my own version of combining the very nice looking desing of www.thingiverse.com/thing:4771318 + the back part of this one : www.thingiverse.com/thing:4486071 I increased the with of both letters(XR) and main/base plate for extra…

Order a print of this model

Printables

Onewheel trunk disc remix to fit Ender 3

Onwheel trunk disc remixed to fit on an Ender 3 buildplate. With a small change to make it fit better for rails with railguards/sidekicks Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2…

Order a print of this model

Printables

Onewheel "Fakebone" collection. V1 Pint XR Plus

This is my collection of fakebones for all Onewheel versions. Just mirror the part for the other side Flip it to print on the top surface (where you stand on), except for the "solid" version. All fakebones are meant to be attached with…

Order a print of this model

Printables

Onewheel Flightfin extenders

I made these Flightfin extenders for some people and figured I could just share the design with the world. Yes, the bottom is flat and that isn't as nice as having a curve there as well. The thing is, it is so much easier to print them…

Order a print of this model

Printables

Onewheel fender delete

To make your XR or Plus look more like a Pint. There are STL's for 3d printing available, but also DXF for lasercutters/CNC routers. Album of it in action: https://imgur.com/a/NMT0Pz2 The options are; With or without openings for the…

Order a print of this model

Printables

Onewheel mini replacement wheel/tire treaded Hoosier

I wanted my Onewheel mini to look more like my real XR, So I designed a treaded tire that will work on a Onewheel mini. I printed it with a resin printer, but FDM would work too I guess! Print Settings Printer Brand: Anycubic Printer:…

Order a print of this model

Printables

Onewheel mini floatplates

I wanted to make my Onewheel mini to look more like my real one, so I made these floatplates to glue onto the mini. To bend the plates into shape, heat the ends a little bit and use a sharp edge to form them. Pictures will follow soon.…

Order a print of this model

Printables

Onewheel XR/Plus rear footpad improved shape and design files

I wanted to make some changes to the original file, but the orientation of the design was a few degrees off so I wasn't able to work efficiently. Recreated the file with my own preferred shape etc. Fusion 360 design file is included Print…

Order a print of this model

Printables

Onewheel Pint Controller Insulator

A printable Onewheel Pint controller insulator in case you lost/damaged yours. 0.3mm thick

Order a print of this model

Printables

Onewheel Pint Power Button Nut

Idk who needs this but if you still have the metal nut here's a printable replacement 3/8-24 nut.

Order a print of this model

Printables

GrippySheet Onewheel Grip Solution

GRIPPYSHEET STUDIO IS NOW AVAILABLE AT https://studio.grippysheet.com GrippySheet grip tape solution with innovative ConeControl technology /s Recommended print settings: 3 wall loops 3 top/bottom layers (2 for bottom will also work for…

Order a print of this model

Printables

Onewheel Pint Connector Nuts

Motor and Footpad nuts for the Onewheel Pint. Printed on a BambuLab P1S at 0.08mm layer height for optimal thread quality. Motor nut is M16x1 and the footpad nut is M11.5x1 (fr why 11.5)

Order a print of this model

Printables

Onewheel Pint Foot Holds

Includes a mud guard, this may require to be trimmed to fit one side of the board. Includes 2 variations of the foot hoot, one with an air tag slot and one with a VnR/CnR port that a GX-12 can be wired into. Print the Fender in 100%…

Order a print of this model

Printables

Superflux hub Fungineers Onewheel XR

My own version of Superflux hub Fungineers

Order a print of this model

Printables

Onewheel XR Fungineers X7 rails

onShape CAD version of Fungineers X7 rails done from scratch. All credits to Rick, who did a great job. Uploading with his permission X10 rails coming soon!!

Order a print of this model

Printables

WheelStand 2.0 (Onewheel roller attachment)

New and improved version of my original Wheelstand . Tired of carrying your Onewheel through grocery stores? Roll it around like a suitcase with the Wheelstand! Includes an integrated kickstand. The Wheelstand can be kept on the Onewheel…

Order a print of this model

Printables

Onewheel XR vesc Status LED bar

Based on this instructables artical. Works with stock wood footpad https://www.instructables.com/Adding-Status-Lights-to-the-XRV-Kit-With-the-Fungi/

Order a print of this model

Printables

Onewheel Pint S Stand (Pint X with Flared Footpads)

Reverse engineered and customized to fit the Onewheel Pint S (or the Pint X with Flared Footpads) from @venykrid_2240479s “Onewheel Pint X Stand”. Sits at a slight angle to keep the board stable. Includes a sturdy holder for the standard…

Order a print of this model

Printables

Onewheel Stand (Fits All Onewheels)

This is a very heavy duty stand for any Onewheel For printing use something that is strong and durable, and about 10 to 50 percent infill with 1 to 3 walls

Order a print of this model

Printables

Onewheel XR Status LED bar

This part has wire paths protruding from both ends to enable flexible wiring options. A slot is built in below where the status LED strip sticks to allow for the ‘Digital Out’ signal from the last neopixel to be exposed to continue the…

Order a print of this model

Printables

mini onewheel pint S

this is a good mini onewheel pint S for your desk or any where else

Order a print of this model

Printables

Onewheel XR Fungineers Superflux new mounts

onShape CAD version of Fungineers Superflux new mounts done from scratch. All credits to Rick, who did a great job. Uploading with his permission

Order a print of this model

Printables

Onewheel Generic Foothold

Want to make a foot hold for a new Onewheel that doesn't exist? Well you can use this model to do that! Find a base fender-delete model, plop this on top, sweep the ends to form a curve and now you have a flight fender! I used this to…

Order a print of this model

Printables

Onewheel GT/GTS/XRC Foot Holds

Print fenders in ABS or PETG with 100% infill. Foot hooks, AirTag cover, and mud flap should be printed in TPU. Mount the foot hooks to the fender using M5 screws and nuts. Nuts should slot into the cutouts on the back of the fenders.

Order a print of this model

Printables

Onewheel XR footpads with Flight Fins mounts outside

This enables you to reuse your flight fins but mount them on the outside. I found that they still allow you to run-out a nosedive and only make jumping off slightly more inconvenient but you be the judge. I printed these in TPU with 3…

Order a print of this model

Printables

Onewheel pint/pint X/S charger plug

protect your Onewheel charger port with this charger plug. It is a stiff fit I would recommend TPU I don't think any other filament would work and I would use a high infill for more strength, sorry for the ruff looking pint S. I also…

Order a print of this model

Printables

Onewheel XR Fungineers X10 rails

onShape CAD version of Fungineers X10 rails done from scratch. All credits to Rick, who did a great job. Uploading with his permission

Order a print of this model

Printables

Rear Footpad Grippy Dock for Onewheel GT

Recommended print settings (For dock pads) included a plain one 3 wall loops 3 top/bottom layers (2 for bottom will also work for more squish) 15% honeycomb infill Other recommendations: Use a 0.4mm nozzle to ensure the spikes are printed…

Order a print of this model

Printables

Onewheel vesc Magnet Big Fender for Big tires

Onewheel vesc Magnet Big Fender for Big tires I created this Fender to help those who have large tires, it fits all rail models because the fenders are divided into 4 pairs and the two in the middle are movable so they will be held by…

Order a print of this model

Printables

ONEWHEEL GT CNC CONTROLLER BOX (COMPATIBLE WITH VOW MUSHIES)

Order a print of this model

Printables

Onewheel XR (ish) desk toy.

You need to print: 2 x ow rail 2 x ow foot plate 1 x ow shaft 1 x ow skid plate back 1 x ow skid plate front 1 x tire (two to choose from) EDIT: Added a rounder version of the tire. Options ;) I printed the tire in TPU, foot plate in Wood…

Order a print of this model

Printables

Onewheel XR 16 pin Molex converter

Edit: Added requested variant with just the 20mm cable gland. Included .step file. Requires NO modification to your stock XR controller box! There are some other 16 pin molex conversion prints out there, but I wanted to cram in some…

Order a print of this model

Printables

Onewheel pint bms holder for Matrix101 battery box

To use with the Matrix101 onewheel pint 20s1p battery box to hold any BMS Battery box is here Pintx battery box by Matix101 | Download free STL model | Printables.com

Order a print of this model

Printables

Onewheel Keychain

this is a keychain for all one wheel lovers you put on anything.

Order a print of this model

Printables

Onewheel Foot Holds Top Fender Mount

This mount can be used to add a top fender to any of my Foot Hold Fenders. Simply bolt the mount onto the inside of the half fenders and you are good. To create the fender piece purchase this plastic sheet:…

Order a print of this model

Printables

Onewheel XR Mud Guard

This design assumes you are using XR varial rails. I'm using this part to attach the ‘wings’ to the varial quarter panels. Without this anchoring, the material doesn't effectively wrap/clearance around the battery box cable gland. It's…

Order a print of this model

Printables

FloatNLC 'Rimmy' OneWheel FloatWheel FunWheel Rim Protection for 6" and 6.5" hubs

These Rimmy OW rim guards were designed over the course of several months in the beginning of 2022 to address a problem Float NLC riders were having: Busting hubs from 3+ foot drops on Onewheel boards. This product was tested internally…

Order a print of this model

Printables

Onewheel GT light clip

Holds down your lightbar in a GT onewheel

Order a print of this model

Printables

OneWheel GT/GTS Home Charger

This 3D printable wall mount securely holds your OneWheel GT/GTS Home Charger , keeping your space organized and clutter-free. The mount features a snug fit to prevent the charger from slipping while providing airflow and easy access for…

Order a print of this model

Printables

OneWheel GT/GTS Hyper Charger

This 3D printable wall mount securely holds your OneWheel GT/GTS Hyper Charger , keeping your space organized and clutter-free. The mount features a snug fit to prevent the charger from slipping while providing airflow and easy access for…

Order a print of this model

Printables

OneWheel Pint / Pint S Home Charger

This 3D printable wall mount securely holds your OneWheel Pint / Pint S Home Charger , keeping your space organized and clutter-free. The mount features a snug fit to prevent the charger from slipping while providing airflow and easy…

Order a print of this model

Printables

OneWheel Pint / Pint S Ultracharger

This 3D printable wall mount securely holds your OneWheel Pint / Pint S Ultracharger , keeping your space organized and clutter-free. The mount features a snug fit to prevent the charger from slipping while providing airflow and easy…

Order a print of this model

Printables

onewheel stand

4 wheels for more stability and the onewheel stands more vertical keeping better balance. https://www.amazon.com/dp/B0DCK58K7S?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1…

Order a print of this model

Printables

Onewheel XR/Pint Stator Stand

I designed this stator stand to keep my Onewheel Pint Hypercore stator stable and upright during a Superflux cable swap. It should be compatible with all Onewheel+ XR and Onewheel Pint Hypercore stators.

Order a print of this model

Printables

Onewheel Race For The Rail (RFTR) Replica Trophy Swords XR/GT

Wanted to do something with my rails lying around, so I re-created the 2017 and 2022-2024 Race for The Rail trophy swords. Both are designed for the left rails of a board, with the hole closest to the bottom. I recommend printing these…

Order a print of this model

Printables

Onewheel card

As you can see in the picture, it is multi color so I'd recommend using a AMS so it looks cooler

Order a print of this model

Printables

Onewheel Pint models charge port plug holder

This is a onewheel pint series plug holder for safe storage of the port plug while charging. I printed using a Bambu Lab X-1 Printer in PLA. The inner edges of the clip may need sanded a tiny bit. Be sure to use 100% infill on the clip…

Order a print of this model

Printables

Onewheel GT CNC Battery Box (Compatible With Vow Mushies)

This box was designed to be compatible with Vow mushies. This box was also designed to specifically fit TheBoardGarages “ 777 ” split battery pack with BMS mounted to pack or any other 18s2p pack made for the torque box. Specific Details…

Order a print of this model

Printables

Onewheel XR Battery Mud Guard

Order a print of this model

Printables

Onewheel Pint/XR Gripples

These are custom gripples I designed and printed in TPU for onewheel XRs/Pints.

Order a print of this model

Printables

Onewheel Rail Badges

Rail badges for your Onewheels! Print in TPU and enjoy! Main Models are the blanks, they come in 3 compatibility types: XR WTF XR Bolt GT WTF Assorted custom requests will be added as they are requested in Vescify

Order a print of this model

Printables

Mini Onewheel Stand

Holds an XR with Torque Bangs/other ~72mm thick boards. Fits a 180x180 build plate.

Order a print of this model

Printables

Onewheel GT Charge Port Plug - No Logo

Removed logo from @Kagman's charger port cover to make printing easier.

Order a print of this model

Printables

Onewheel GT Drop Top Base For VOW BTG

This is a drop top fender piece that is for BTG tires for the onewheel gt. Only works with vow stuff.

Order a print of this model

Printables

Bushies: Big Mushies for Onewheel XR

Credits to @viperbite_1200299 for making these footpads and Stanley from VOW Systems for Mushies! Attached are the footpads themselves in flowglider and universal configurations, DXF outlines for the griptape to make your own, and 2 grip…

Order a print of this model

Printables

Onewheel XR Drop Top Fender Base Piece

You know what this is ;)

Order a print of this model

Printables

Onewheel XR BTG Lift Kit for Scanned DTF Base Pieces

#10-32 by 1 & 1/2in screws are recommended Print in solid TPU or close to it!

Order a print of this model

Printables

Onewheel air scoops for XR platforms

The onewheel XR motor can easily overheat when riding on trails, regardless of any kind of cooling accessory you might have like Iceblocks or whatever. These air scoops help cool down the motor under certain conditions. Mainly, you can't…

Order a print of this model

Printables

Screw caps for OneWheel GT

These are press-fit screw caps for the OneWheel GT (may work on others, I'm not sure) Suggest printing in PETG, no supports To remove you will probably have to wreck them with a pick screwdriver or pliers Also see my other model: Rail…

Order a print of this model

Printables

Onewheel XR Mini Fenders

Order a print of this model

Printables

Rail guards for OneWheel GT

These were made from a 3D scan of an actual board for a perfect fit, the outer face prints flat on the print bed for optimal adhesion. Sadly, these do not fit on the MK4 or CORE One print bed, even individually, even at an angle, you will…

Order a print of this model

Printables

Dual charger carry solution for OneWheel GT

Order a print of this model

Printables

Air Scoops V2.1 for Onewheel/Vesc's

Mass isn't everything when it comes to managing heat. You also have to have a way to remove the heat from the heatsink. These V2.1 version of my air tunnels do that. What's different between V2.1 and the originals? These work better at…

Order a print of this model

Printables

Onewheel GrippySheet Gripples

Included is the base model from a user on Thingiverse, the remix with the GrippySheet pattern, and a DXF for recreational use. Original model can be found here

Order a print of this model

Printables

OneWheel GT Stand with slot for Hypercharger

OneWheel GT Stand with slot for Hypercharger is a stand with extra flair, and a window for the charging light indicator. Print on a flat side, 6 walls for strength, 15-25% infill.

Order a print of this model

Printables

Slimmer OneWheel GT Stand with slot for Hypercharger

Slimmer version of OneWheel GT Stand with slot for Hypercharger is a stand with extra flair, and a window for the charging light indicator. Print on a flat side, 6 walls for strength, 15-25% infill.

Order a print of this model

Printables

Adjustable VESC Onewheel Stand

Order a print of this model

Printables

Onewheel Pint Charger Plug Holder & Latch

My Onewheel Pint Charger Plug Holder kept coming off, so I remixed it with a sleeve and a latch for the charger cable. Print Settings Printer Brand: FlashForge Printer: Creator Pro Rafts: No Supports: No Resolution: 100 (.1 mm) or better…

Order a print of this model