Mini Fender for Onewheel Pint / Pint X
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€3.60 – €4.40 net (excluding VAT)
For file: mini_fender_ribs_0.4n_0.2mm_PETG_MK3.5_3h3m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €4.00 excluding VAT (range midpoint).
- Weight reported by the author
- 75 g
- Print time reported by the author
- 3.04 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A small fender with a thin base that doesn't hinder your foot placement. With or without reinforcing ribs.
- Rating
- 5 / 5
- Likes
- 32
- Downloads
- 257
- Makes
- 2
- Views
- 1,075
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Call them however you want – these mini fenders have a low-profile base, so your foot placement is not hindered with this add-on-top fender. Check out my Onewheel Collection – I have also designed charging port plugs for the Pint, mini fenders for the XR and other Onehweel related stuff.
Variants
Designing a thin but durable mini fender turned out to be a bit of a challenge – if you ride hard, that is. After trying different designs and materials, I ended up adding ribs to my fender design and printed it with PETG. I'm riding with this version over a year now. If you don't like the design with the ribs, I added another version without the ribs, but with a thicker upper part (I didn't test the durability of this version though).
Mounting
The only drawback of this low-profile design is that you need a special screw length for the fender at the back. For the fender at the front, you can use M4 x 16 mm countersunk screws. For the fender at the back, you need M4 x 13.5 mm countersunk screws (use two other M4 x 16 mm screws and cut them to that length). Don't use M4 x 12 mm! Otherwise you might strip the thread on your rails (not necessarily when mounting, but when you hit the fender with your foot – don't ask me how I know).
Printing Info
I recommend using PETG or a material with an even better layer adhesion and impact resistance. If you want to print the fender with a flexible TPU, you should print a few bottom layers with PETG or PCTG and then continue the print with TPU. If you print this model entirely out of flexible TPU, you will end up with a fender that bends too much laterally (because of the low-profile and thin design).
Happy printing and onewheeling!