GrippySheet Onewheel Grip Solution
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Onewheel grip tape
- Rating
- 0 / 5
- Likes
- 33
- Downloads
- 421
- Makes
- 0
- Views
- 2,082
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
GRIPPYSHEET STUDIO IS NOW AVAILABLE AT https://studio.grippysheet.com
GrippySheet grip tape solution with innovative ConeControl technology /s
Recommended print settings:
3 wall loops
3 top/bottom layers (2 for bottom will also work for more squish)
15% honeycomb infill
Other recommendations:
Use a 0.4mm nozzle to ensure the spikes are printed well. A 0.5mm nozzle will also work (as pictured)
I recommend printing the spikes in a material different from the base for even more comfort. 83A TPE for the base and 72D TPU for the spikes on the 3mm base version will provide the best grip while providing a soft feeling, similar to using foam backed grip tape
You may receive issues about non-manifold parts but that shouldn't be an issue with most modern slicers.
Praise Otis