1 / 3
Onewheel Pint/GT - Trunk Stand
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Onewheel stand with a cleated bottom for carpeted trunks. Interlocking design provides support for smaller print-beds.
- Rating
- 5 / 5
- Likes
- 68
- Downloads
- 436
- Makes
- 3
- Views
- 2,020
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Update: 7/25/2024
- Added GT/S variant
- Added M3 nut cut-outs to skid plates
__________________________________________________________________________________________________________________
This design was inspired by the original remix from Asuswild.
- It can accommodate boards fitted with any/all of the following: the official Maghandle, rail guards, and fender.
- When properly positioned, only the tire's sidewall touches the holder.
My take on the design provides multiple benefits.
- The hollow center dramatically reduces print time and material consumption
- The rounded edges allow for smoother drop-in of the board
- The interlocking design provides support for smaller print-beds
- The cleated bottom skid plate almost entirely prevents movement in carpeted trunks
- Replaceable bottom skid plates leave room for different grip designs and color combinations
__________________________________________________________________________________________________________________
Compatibility
- Pint/Pint X
- GT/GT-S
Assembly
- (6x) M3x20mm bolts (required)
- (6x) M3 washers (optional)
- (6x) M3 nuts (optional, the threads self-tap into the skid plate)
- Print 2x of the holder and skid plate
- Snap together the top and bottom sections separately
- Line up the holes and screw the two sections together (the skid plates will be rotated 90° relative to the holders)