Fungineer Stompies Footpad To Flightfins XR/VESC Fender Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an adapter plate to allow installing FlightFins XR/VESC Fender with a Fungineer Stompies Footpad
- Rating
- 5 / 5
- Likes
- 3
- Downloads
- 113
- Makes
- 0
- Views
- 574
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
This is an adapter plate to allow installing FlightFins XR/VESC Fender with a Fungineer Stompies Footpad
Created because the Stompies Footpad was a different profile than I expected, and had a 3d printer to fix that. Uploading here since other users seem to have had the same issue.
Note: This will squish the thick grip tape on the Stompies if no modifications are made to the fender. If people want me to modify the profile a little bit to not have it squish, then let me know in the comments
PrusaXL Settings (Mostly Defaults)
0.6mm nozzle
15% infill default grid pattern
Supports: Support on build plate only
0.32mm layer Height
0.2mm First Layer Height
2 Perimeters
3 Bottom Layers, 4 Top Layers
