Fungineer Stompies Footpad To Flightfins XR/VESC Fender Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an adapter plate to allow installing FlightFins XR/VESC Fender with a Fungineer Stompies Footpad
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 110
- Wydruki
- 0
- Wyświetlenia
- 560
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
This is an adapter plate to allow installing FlightFins XR/VESC Fender with a Fungineer Stompies Footpad
Created because the Stompies Footpad was a different profile than I expected, and had a 3d printer to fix that. Uploading here since other users seem to have had the same issue.
Note: This will squish the thick grip tape on the Stompies if no modifications are made to the fender. If people want me to modify the profile a little bit to not have it squish, then let me know in the comments
PrusaXL Settings (Mostly Defaults)
0.6mm nozzle
15% infill default grid pattern
Supports: Support on build plate only
0.32mm layer Height
0.2mm First Layer Height
2 Perimeters
3 Bottom Layers, 4 Top Layers
