Onewheel V1 front concave footpad
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This foot pad is mounted over the original front footpad and has a 5mm side to side concave, and about an 11mm lift at…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 18
- Makes
- 0
- Views
- 134
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
This foot pad is mounted over the original front footpad and has a 5mm side to side concave, and about an 11mm lift at the front lip. I printed it standing on the front facing edge with a 10mm brim. It leaves a 2 mm gap between it and the sensors as not to give false sensor readings, but if you leave about a 15mm overhang of grip tape, it will seal against the original pad so no gravel gets under. I mounted it with double sided tape, but it would work just fine being glued. If you experience any issues please tell.
Category: Hobby