Search results: caddx

Counting matching models…

Printables

ZOHD Drift - CADDX Ant Nano Mount

CADDX Ant Nano Mount Camera mount for ZOHD Drift

Printables

Fimi Manta Caddx Camera Support

This support fits perfectly, leaving the camera centered on the drone, I screwed it in and put a little glue on the sides for better fixation. You may need to widen the hole a little with a small drill or your own wrench or screw. Esse…

Order a print of this model

Printables

Fossils Stuff Revo 5 CADDX FPV Camera Mount

Designed to interface the camera mount that comes with the CADDX Ratel 2 with the base plate of the Fossils Stuff Revo 5 frame. You will need: 2x M2 x 4mm heat-set insert 1x M3 x 4mm heat-set insert 2x M2 screw 1x M3 screw

Order a print of this model

Printables

Fimi Manta Caddx Avatar GT Support

Fiz esse suporte para colocar o vtx por dentro do fimi manta para melhorar a aerodinâmica , mas tem que colocar o suporte da bateria mais para atras ao depender do tamanho/tipo de bateria , fiz também entrada de ar frontais (como na foto)…

Order a print of this model

Printables

Caddx Walksnail Ascent Lite VTX Mounting Pod

I have a small form factor version as well. Get it here . Print in something with higher heat resistance than PLA. I printed in ASA for lightness, heat and UV resistance. Screw VTX to the Body with 4* M3x4 or M3x6 screws. The Cam-Holder…

Order a print of this model

Printables

CaddxFPV Walksnail Moonlight VTX Mount for TBS Source One V5

CaddxFPV Walksnail Moonlight VTX Mount for TBS Source One V5 Made possible with @Dtuned_2160698 Features: Full protection of the Moonlight Support dual antennae setup Cutouts for port access Slit and zip tie step for easy and flexible…

Order a print of this model

Printables

Eachine Wizard X220S Gopro Session - Runcam 5 -Foxeer Box - Caddx Orca Dophin (for TBS ND Filter)

Print in TPU use TBS ND Filters: (https://s.click.aliexpress.com/e/_9ROQbh)

Order a print of this model

Printables

Walksnail Moonlight and Caddx GM3 Gimbal Mount with Fan and Cage

Just a simple mount for the Walksnail VTX and new Caddx GM3 Gimbal that you can use or modify to fit your needs. It has an additional mount for 40mm cooling fan, because the Moonlight VTX heats up very quickly without an active airflow.…

Order a print of this model

Printables

Caddx Ratel, Walksnail Avatar 14mm camera lens cover

Can be used with any 14mm RC cameras. Print with soft TPU. I recommend to print two or three at once (even if you need only one piece), because of possible insufficient cooling and fast print time Tested on: Caddx Ratel 2 Caddx Ratel Pro…

Order a print of this model

Printables

BETAFPV PAVO PICO canopy for caddx Polar Vista

This model is adecue for Caddx Polar Vista

Order a print of this model

Printables

Caddx Camera Guard

It is designed to reduce wind resistance. Print on: NYLON, TPU or PCTPE

Order a print of this model

Printables

Heewing Ranger T-1 Caddx Peanut Tail Mount

I printed it in TPU 100% infill, organic supports

Order a print of this model

Printables

naked Caddx Vista - Spacer

Spacer for naked Caddx Vista Print with support.

Order a print of this model

Printables

Caddx FireFly Low-Profile Mount (Fixed)

Had "fix" the original file as I was having issues printing the original file Category: R/C Vehicles

Order a print of this model

Printables

Caddx Walksnail Goggles X Module with Foxeer Wildfire

This is a two part body that alllows the use of the Foxeer Wildfire cover by LordKokosnuss https://www.thingiverse.com/thing:5814297 Download file includes the above cover. It does require the base to be superglued to the main body so…

Order a print of this model

Printables

ZOHD Drift - CADDX Ant Nano Mount

CADDX Ant Nano Mount Camera mount for ZOHD Drift

Order a print of this model

Printables

Caddx polar camera protector

Must be printed with TPU or other soft material.

Order a print of this model

Printables

Caddx Vista Mount

Good day, all! We all love the quality of our DJI FPV setups, right? But it's expensive to put a Vista or Air Unit in every single plane you own (assuming you can find one in stock). Meanwhile, lots of molded FPV wings, like the…

Order a print of this model

Printables

CADDX GM3 Gimbal Base Plate & Roll-Cage parts for AOS UL7 Quad

Base Plate & Roll-Cage parts made of ASA for CADDX GM3 Gimbal to be mounted on an AOS frames, model UL7 and probably Cine35 EVO . To check if it will fit other frames before printing everything, just print the “base” piece…

Order a print of this model

Printables

Caddx Vista Single Standoff Antenna Mount

For 4mm standoffs. Works well for my FlexRC Skyhopper. Category: R/C Vehicles

Order a print of this model

Printables

CADDXFPV Ant lite STEP

CADDXFPV Ant lite

Order a print of this model

Printables

Caddx Vista Digital FPV Pod

This case turns the Caddx Vista DJI Digital FPV Air unit into a self contained FPV pod that can be attached to any RC aircraft or ground vehicle. I use Velcro to attach mine to RC planes.This allows me to convert just about any plane to…

Order a print of this model

Printables

Fimi Manta Caddx Avatar GT

Order a print of this model

Printables

Basic CADDX GM3 and VTXv2 Mount for "Morrigan"- 1:8 Scale RC Rock bouncer Crawler by Black Crow

This is a modified version of the mount that replaces the Morrigan seats with GM3 mount and at drivers eye view. The VTX mount continues to support the 40mm fan but has been modified slightly to fit the CADDX VTX v2. Its pretty rough…

Order a print of this model

Printables

Fimi Manta Caddx Camera Support

Order a print of this model

Printables

sturdier Kayoumini Parts (skids)(Caddx Ant canopy)(motor protectors)(vtx anenna holder)

A little Stylish rework of the canopy for the caddx ant (i actually redesigned it from the ground up, but i made it to be the same shape) with some slots to be colored with nail polish. that is a bonus if you care for color matching your…

Order a print of this model

Printables

Caddx GoFilm20 Rugged Box carrying case

Simple carrying case for the GoFilm20, fits perfectly, no rattling. You will need 6x M3x20 screws. Print everything without supports, use TPU or similar flexible material for the seal (you can also just use it without the seal as well).…

Order a print of this model

Printables

Caddx Baby Ratel 2 mount remix for Wide Angle lense.

This is a remix for the Caddx Baby Ratel 2 . This remix allow to mount some M8 iso threaded lense on it. You can mount some wide angle lense like me and get a bigger FOV. (ref WI-1780B-M8) Gently remove the original mount to put the PCB…

Order a print of this model

Printables

CADDX Peanut Support for QAV-S Joshua Bardwell Edition

This is a CADDX Peanut Support for the QAV-S Joshua Bardwell Edition Frame. I didn't do much design on this one, please be sure to check the sources and thank them :) Category: R/C Vehicles

Order a print of this model

Printables

BQE Rip Squeak V2 Caddx Peanut Support

This a basic rework of an existing support, it uses the front screws and a ziptie should be used to secure the back part of the support. Category: R/C Vehicles

Order a print of this model

Printables

AR Wing Pro Caddx camera mount

The AR Wing Pro seems to be built mostly with DJI hardware in mind. I've chose the Walksnail Avatar GT. To mount the camera, I didn't want to use glue. This wedge will hold the camera at 0 degrees fairly snug. I'm sure every application…

Order a print of this model

Printables

SpeedyBee Mario Fold8 mount for caddx GM2

This is set of elements to replace front ALU part and mount caddx GM2 gimbal. For the mod You need: M2x10 screw 2pcs (or M1.4x6 if do not want to drill out threads to 2mm dia) 4 silicone dampers - dimensions as shown on pictures -…

Order a print of this model

Printables

CADDX Ratel 2 Micro Mount for TBS Source One V3

I designed a TBS Source one's mount for the CADDX Ratel 2 Micro.This mount using the original carbon camera support It's attached to this one with two M2x10 screws. Two pins are catch in the carbon support to lock the camera at 0,10,20,30…

Order a print of this model

Printables

1S/2S Toothpick CrazyBee frame, Whoop VTX mount and CaddX EOS2 camera mount

I made this frame after creating my 1S frame and decided to experiment more with a more powerful 1S/2S size. After so many iterations finally it is here. The cam and VTX mount should be printed but the main frame should be made of Carbon…

Order a print of this model

Printables

Inlay für eine Transportbox eines Caddx GoFilm20

Inlay für eine Transportbox eines Caddx GoFilm20, nachempfunden der Original Einlage mit den Maßen 140mmx140mm -------------------------------- Inlay for a transport box of a Caddx GoFilm20, modelled on the original inlay with the…

Order a print of this model

Printables

Caddx vista Antenna holder

this is an antenna holder for the caddx vista VTX its made for the iflight Nazgul eco XL5

Order a print of this model

Printables

Caddx Peanut Mount Light Version

You can use this in combination with a mount like this: https://www.printables.com/model/1215528-geprc-smart35-hd-camera-mount-plate

Order a print of this model

Printables

FPV camera lens caps, 9, 10, 14mm, Caddx Ratel 2, Baby, Ant

Printed in TPU, Lenscaps that protect the lens during transport but don't touch the lens itself. Printed in TPU 95 Shore. If to tight or to loose for your lens, just scale the model a few percent in your slicer.

Order a print of this model

Printables

Caddx Vista Mount w/ FlyfishRC stubby and ELRS antenna holder

Caddx Vista Mount w/ FlyfishRC stubby and ELRS antenna holder Can be used without any screws - the walls on the sides holds the vista in place Comes with mounting holes for either 20x20 or 25x25 Can hold different stubby antennas - i used…

Order a print of this model

Printables

Fossils Stuff Revo 5 CADDX FPV Camera Mount

Order a print of this model

Printables

Custom TPU Mounts for Rekon 4 LR Frame with Caddx Peanut Camera

These are custom TPU mounts for my specific build of the Rekon 4 LR Frame Kit . They were designed to mount the components I used but I figured I'd post this in case anyone was building a similar configuration and found these useful. I…

Order a print of this model

Printables

Hornet origami canopy for Caddx Ant Lite

Designed to fit Caddx Ant Lite analog camera and Maple Wireless “Lite 1s” antenna. Camera and antenna mounting areas have grooves for zip ties. Prints flat without supports. Tested with Sainsmart 95A TPU. Camera should sit somewhere…

Order a print of this model

Printables

DJI FPV / Caddx Vista / Air Unit pan/tilt gimbal mount for FPV aircraft

This is a very simple two-piece pan/tilt gimbal for a Caddx Nebula Nano (the standard camera shipped with most Vista kits) or any other 14mm wide camera, a standard-sized 9g pan servo (ideally one with 180° of rotation or more), and a…

Order a print of this model

Printables

Caddx Ratel 2 Crash protection sleeve (TPU)

Mounting holes are exposed so it can still fit into the mounting bracket. Be sure to print with TPU and enable supports (on build plate only) with 0.2mm Z gap. A bit tedious to fit the camera inside, its a tight fit. Don't be scared to…

Order a print of this model

Printables

Caddx Gofilm 20 Fpv Drone Case

I made this from petg. Perfect fit for caddx drone. No clip for cover only tension of material, can be adjusted by extrusion if needed but on bambu x1c is perfect. You can print only one color and logo should be not visable.

Order a print of this model

Printables

Caddx GoFilm20 Wall Mount

I got a new Cinewhoop and wanted to add it to the wall with the rest of my rigs and couldn't find a good wall mount for it so I sketched one up quickly. I can't confirm, but i assume it will work for a similarly sized 2" whoop frame.…

Order a print of this model

Printables

Easy print Moblite / Mobula canopy for Caddx Ant Lite

Strongly inspired by the very effective design of ngn33r: https://www.thingiverse.com/thing:4859251 other cam sizes & angles can be updated in the provided F360 files.

Order a print of this model

Printables

Fimi Manta Caddx Avatar GT Support

Order a print of this model

Printables

Lens cover for caddx ratel 2

lens cover to protect the caddx ratel 2 camera

Order a print of this model

Printables

Caddx Peanut Case

Simple single part case for your peanut. Slides and snaps in nicely, leaves room for charging mount on the back. Prints great in rigid plastic. PLA, PET-G, or my favorite HT-PLA+. Post your makes! Please post 'em! Really! Take a…

Order a print of this model

Printables

Bomber Caddx Peanut GoPro Mount, ultra TPU protection

The only Caddx Peanut Mount you'll ever need Designed this to be highly protective AND easily removable. A difficult balance but I think I got it down. It protects the lens as much as absolutely possible without getting in the image. It…

Order a print of this model

Printables

FPVCycle Glide BN-880 GPS and Caddx Antenna Mount

GPS and antenna mount for the FPVCycle Glide frame for the Caddx stock antenna and BN-880 GPS unit

Order a print of this model

Printables

FlyWing FW450 Canopy Bottom plate with CADDX Walnut mount and space for beacon lights

Here's a plate that you can secure to the bottom of your FreeWing FW450L with zip ties. Included is a mount for a Caddx walnut. Towards the rear you can mount flashing beacon lights. In the middle I plan on experimenting by adding a cargo…

Order a print of this model

Printables

AR wing 900 camera adapter for CADDX ANT

Adapter for fitting a CADDX Ant camera in the AR wing 900 (or Classic). The adapter has a tight fit to keep the camera in place. It is designed to be printed in TPU. Many thanks to the designer of the original design for sharing fusion…

Order a print of this model

Printables

Sanchez 3in Canopy for Caddx Turtle with Cooling Ducts

07/26/19 update: I've added a version that includes recesses for M2 nuts, to better hold the canopy on. I decided to make a version of this canopy with cooling ducts to let out some of the heat generated by the VTX and the camera's…

Order a print of this model

Printables

Caddx Orca gopro mount

Relativ simple mount for your caddx orca and session5. including slot and groove for a strap. printns front down in tpu.

Order a print of this model

Printables

Caddx Vista Digital FPV Case

This is the remix of the top cover of the really nice Caddyx Vist Case with additional 25mm fan 12V on top. I'm using the Caddx Vista on my RC Car and the Cam overheat really fast. Had a spare 25mm fan and used it on top of the case for…

Order a print of this model

Printables

HSKRC 118 Caddx Peanut Mount

Caddx Peanut Mount for HSKRC 118 Requires M2 screw to secure peanut to the mount Printable in either TPU or PLA/PETG, but TPU is recommended. Mounts using the top cross standoff and using 2 cable ties to secure to frame Print Settings…

Order a print of this model

Printables

DJI Caddx Vista on a FMS ASW-17 aircraft

Print in TPU or PETG for the mid part that is in contact with the hot Vista unit. Print the mid section upside down with the curved surface facing up. Support is required, but that is easily broken off. Print with 0.1mm layer height, for…

Order a print of this model

Printables

Atomrc Dolphin Caddx Vista Insta360 go 2 Pan Reinforced Remix

I printed it in PETG, 0.6 nozzle and 20% infill. Any nozzle size will do. No supports required. Printed standing up as it would be mounted to the servo Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No…

Order a print of this model

Printables

Armattan Rooster Caddx Vista/Receiver Antenna Plate

This is a remix of my original Rooster VTX/Receiver Antenna Plate. Updated to hold and protect the stock antenna of the Caddx Vista HD VTX at a 30 degree angle. The receiver antenna tube holes have also had their diameter increased by…

Order a print of this model

Printables

Caddx Vista Antena Holder for Apex frame

Printing Instructions: Rafts: No Supports: Yes Infill: 100% Filament material: TPU

Order a print of this model

Printables

Field Case for Caddx Peanut Camera Kit

This is yet another organizing case for all the fiddly accessories which come with a Caddx Peanut (the lightweight drone-ready version of the Insta360 Go 2). It's a lot more compact than the original box and keeps things safe together in…

Order a print of this model

Printables

Caddx Orca ZipTie-Mount

This design is a zip tie fixed camera mount for the Caddx Orca. It has a 25° angle. One version has extra holes for the zip ties if the top plate is smaller.

Order a print of this model

Printables

TBS Source CaddxFPV Orca Mount

The original camera mount was designed for a GoPro Session and the Caddx Orca did not fit in that perfect. After I created one version with a too thick frame in front of the lens and because of the extreme wide field of view of the Orca,…

Order a print of this model

Printables

Caddx Walksnail Ascent Lite VTX Mounting Pod

Order a print of this model

Printables

Caddx Walksnail Ascent Lite VTX Mounting Pod Small Size

Print in something with higher heat resistance than PLA. I printed in ASA for lightness, heat and UV resistance. Attach VTX to the Body with 4* M3x4 or M3x6 screws. The Cam-Top attaches to the Body with 4* M3 screws. Camera attaches using…

Order a print of this model

Printables

GEPRC CineQueen Caddx Penut mount 20° + Power conector

A mount for the Caddx Penut on the GEPRC CineQueen 4K

Order a print of this model

Printables

Caddx Nebula Nano Pro Camera Mount 75mm Frame

One is right antenna mount and one is left antenna mount Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Infill: 20 Filament: Sainsmart TPU Category: R/C Vehicles

Order a print of this model

Printables

Whoop Canopy for Caddx Ant

I really like this type of canopy. That's why I designed it. Since I wanted to print in TPU, I designed it so that it can be printed flat and without supports. The camera opening is 10.3mm and fits the CADDX antenna perfectly. At the end,…

Order a print of this model

Printables

Caddx Vista camera spacer 28mm (Transtec Frog Frame)

A little spacer for mounting the caddx vista camera (wich is about 20mm wide) in my Transtec Frog Frame (28 mm wide sides). Spacer is first screwed to the cam with the included M2 screws. Then mounted in the quad using some additional…

Order a print of this model

Printables

Sub250 OasisFly30 Caddx Ratel Micro 1500TVL Camera mount

Disclaimer: I used AI for the markdown formatting, but it did not do anything else. I wrote and checked all the instructions myself. A mount for the Caddx Ratel Micro 1500TVL to fit the Sub250 OasisFly30. The camera angle is fixed around…

Order a print of this model

Printables

FPVCycle Glide Caddx Vista Antenna Holder

A glide friction fit antenna holder for the caddx vista. I recommend heating it with a heat gun at like 170c for around 30 seconds to soften up the plastic so you can shove the antenna in and then it will shrink down onto the antenna when…

Order a print of this model

Printables

Improved Caddx Vista + Nebula Pro Pod

An improved version of the red pod and made for the nebula pro instead of full dji camera. Uses long metal m2x16mm screws to screw the vista down. Cuts in pics not needed for USB-C port, this has been fixed in uploaded versions. M3 Screws…

Order a print of this model

Printables

Caddx Vista pan servo

Simple and lightweight pan for Caddx Vista Added new version. Category: R/C Vehicles

Order a print of this model

Printables

Nano Skyhunter HD Pod for caddx vista

A FPV pod for the caddx vista air unit to mount on to the Skyhunter racing/nano canopy. Print Settings Printer: P3 steel Rafts: No Supports: Yes Resolution: 0.2 Infill: 20 Filament: Filamentive Petg White Category: R/C Vehicles

Order a print of this model

Printables

AlfaRC Fi-115 caddx vista antenna mount

This mount will help you secure antenna from caddx vista to AlfaRC Fi-115 frame. Print with tpu for best results.

Order a print of this model

Printables

CADDXFPV ANT camera adapter for Happymodel mobula6

*EDIT 08/2026 - TPU 95A works also, PETG lasted about 20 packs* Lightweight adapter to fit caddxfpv ant camera for Happymodel mobula6 2024 tinywhoop. Stock fc screws to mount it to the canopy, and M2 bolts for the ant camera PETG…

Order a print of this model

Printables

CADDXFPV ANT camera adapter for Happymodel mobula6

Order a print of this model

Printables

Insta630 Go 2 / Caddx Peanut ND filter Cases (2x, 3x, 4x)

You need to print it in TPU! The original design comes frome here: https://www.thingiverse.com/thing:5233243

Order a print of this model

Printables

Caddx Vista Plane Mount

Remixed for the Caddx Vista. Use m2x16 screws w/ nuts to hold the vista down. I added extra holes for mounting options. Remix from https://www.thingiverse.com/thing:4775067

Order a print of this model

Printables

Caddx Vista Standalone Unit

Just put a Caddx Vista unit together with a 30x30x6mm fan and a 5V regulator into a special designed housing to be used as a standalone unit for applications without guaranteed cooling and flight controller, e.g. into the hull of my FPV…

Order a print of this model

Printables

AOS 3.5 Caddx Vista Antenna Mount (new version)

This is a mount for the newer version of the Caddx Vista antenna. You can remove the tube and run the antenna coax through the hole. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: .2 Infill: 20…

Order a print of this model

Printables

Geprc Mark4 HD Nebula Pro/Caddx micro AU mount

This is a mount for 19mm cameras. Its still not completed NEW UPDATE: Added v2 where camera is moved a little bit forward Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: Doesn't Matter Resolution:…

Order a print of this model

Printables

Caddx & DJI Air Unit Camera Seal/Sleeve/Boot for FPV

If you replace the camera cable on a DJI Air Unit you will eventually lose at least one of the seals because you have to cut it to remove the cable from the back plate of the camera. This also applys to the caddx vista when you use it…

Order a print of this model

Printables

Flywoo Firefly Hex Nano Caddx Peanut Horizontal & Vertikal mount 15°

print it out of tpu

Order a print of this model

Printables

T-motor Tron80 Caddx Polar mount

quick remix of the only Tron80 cam mount I could find to fit a Caddx Polar or any 19mm size camera I guess... original plastic camera mount plus caddx nebula nano is around 6g this mount printed in tpu 100% infill plus caddx polar is…

Order a print of this model

Printables

Caddx vista 20x20 riser thingy with crossfire rx holder

I have a very tight build where I assumed the wrong esc dimension but luckily there was enough space at FC height so i designed a riser that sits on soft mounting grommets, added a holder for rx and a sort of doughnut where i could route…

Order a print of this model

Printables

DJI CADDX VISTA 20x20 spacer base

3mm high spacer with underneath wire "cavity" (2x10mm), yes the file it's flipped upside down for print ease Category: R/C Vehicles

Order a print of this model

Printables

Caddx Vista enclosure DJI FPV 30x30 mount

enclosure for the Caddx Vista that can be additionally secured with m2 nuts and bolts to the mount, meant to be positioned on top of a 30x30 stack feet/spacers height is 3mm, the holes are intentionally a tight fit to keep it in place…

Order a print of this model

Printables

TBS Source One XT60 Mount with or without Caddx Vista Antenna holder

Hello, This is an XT60 holder for an TBS Source One Frame with or without the original Caddx Vista Antenna. I designt his because i often got the cable from my XT60 plug into my props. First i used the original Caddx Vista Antennamount…

Order a print of this model

Printables

Caddx Peanut GoPro mount

A GoPro mount for the Caddx Peanut

Order a print of this model

Printables

DJI Caddx micro camera vtx antenna holder

Print to hold the Caddx Vista VTX (20x20 holes), micro camera, and antenna. I printed mine with TPU and no supports. I use M2 screws to attach the VTX and heat shrink to hold the antenna. Just add velcro to the bottom and the desired…

Order a print of this model

Printables

T-Motor Tron 80 Caddx Vista lollipop Antenna Mount

Mounting frame for the Caddx Vista antenna lollipop style. The antenna come with the drone but there's no mounting option for it. You will need two self taping screw or an M2 screw/nut. Total additional weight is 1gr.

Order a print of this model

Printables

Tiny Whoop Camera Mounts - Caddx Ant, Foxeer Pico, FX965TW Pitch

Camera mounts for: Tiny Whoop FX965TW Pitch (11mm x 11mm) Foxeer Pico (12mm x 12mm) Caddx Ant (14mm x 14mm) FPVCycle 199C (12mm x 14mm) I've printed the 30 degree mounts without supports. The top bridge is the hardest, it may need to be…

Order a print of this model

Printables

Caddx Vista slim antenna mount for Alien / Martian 2

Was helping my dad attach a caddx air unit lite on his Martian II frame. Couldn't find any mount that would fit the new (slim) antenna on this frame, so I quickly designed this in FreeCAD. The project file is included (not proud of it…

Order a print of this model

Printables

Caddx Ant Lite Canopy for Tiny Whoop

Re-drawn https://www.thingiverse.com/thing:4882164, with slightly tighter fit and a steeper camera angle.

Order a print of this model

Printables

Flywoo Explorer LR feet protector and caddx peanut cam with charger holder

Flywoo Explorer LR. I liked the protector with feet. However, printing them was difficult, so I made a flat spot so they can be (more) easily printed. My TPU settings aren't great, but include the .3mf so at least you don't have to mirror…

Order a print of this model

Printables

Caddx Micro Cam 25 & 30 degree mount for HyperLite FlowRide

This is for the Caddx Micro size camera on the 5mm risers with a 28mm separation. This is for the HyperLite Flowride -- but may work on other HyperLite frames using similar demensions. Edit 4/28/2018 -- I added a second file that is 25…

Order a print of this model

Printables

Caddx Vista mount for 21mm spacing IFlight Nazgul5 v2, XL5, with HappyModel EP1 antenna holder

Standoff spacing is 21mm. Standoff height is 28mm if your frame is not the nazgul and you want to match it. This mount was meant to reduce vibrations caused by the antenna, so I printed mine with PETG. It is very stiff and doesn't flex,…

Order a print of this model