1 / 3
SpeedyBee Mario Fold8 mount for caddx GM2
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
SpeedyBee Mario Fold8 mount for caddx GM2 gimbal replacing from alu piece.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 71
- Makes
- 0
- Views
- 564
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is set of elements to replace front ALU part and mount caddx GM2 gimbal.
For the mod You need:
- M2x10 screw 2pcs (or M1.4x6 if do not want to drill out threads to 2mm dia)
- 4 silicone dampers - dimensions as shown on pictures - commonly used for FC/ESC
- 1 “cage” print
- 1 “arm” print
- 1 gopro / gps mount (optional)
- long 30cm cable from CAM to VTX (assuming VTX is on the back)
I recommend to drill 2 M1.4 holes in gimbal to 2mm diameter and to use 2mm screws. Seems M1.4 is not very strong. But there is version also for M1.4.
files _1 is version where element holes will be threaded by screw itself.
files _2 is version to use tap to create threads