234 models
This part replaces original plywood top tray in Volantex Phoenix RC glider to serve as a replacement and offer attachment for SpeedyBee F405 Wing Mini Flight controller, its Wi-Fi module, HGLRC M100-5883 GPS and XT-60 socket. Print with…
Print approx. €1.59–€1.94 excl. taxPreliminary estimate for one variant
Purpose This mount allows the Mateksys M10Q-5883 GPS & Compass module to be fastened to the Speedybee Master 5 v2 RC drone. It mounts the module to the drone's rear. Special care was taken to design the mount such that the module sits…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
Purpose This mount allows the Mateksys M10Q-5883 GPS & Compass module to be fastened to the Speedybee Master 5 v2 RC drone. Instead of mounting the module to the drone's rear, the mount moves it to the front. The main purpose is to get…
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
This remixed part will serve as a replacement for the stock GoPro mount in order to provide a location for mounting 21x21 mm HGLRC M100-5883 GPS module on a SpeedyBee Mario 5 frame. GPS mount with GoPro v2: better fit and easier…
This remixed part provides a mounting for 25x25 mm BZ-251 GPS module on a SpeedyBee Mario 5 frame. As I don't own such GPS, please let me know if it fits.
Mounting Plate for the SpeedyBee F405 Wing MINI. Makes It Easier to remove FC by only gluing down Base Plate to Aircraft
I needed a mount for a single SMA adapter, an 18mm x 18mm GPS, and an XT60 connector. There was no such variant among the models provided by Speedy Bee, so I took the closest original model, which already had mounting for the XT60 and SMA…
Newly designed 3d custom parts to fit Mario 8 Fold by SpeedyBee. Side plate (mirror it in slicer for other side print upside down with snug support). Landing skids (just print 4 with 100% infill). Antenna array for 2x SMA connector and…
Inspired from original print file provided by speedybee but redesigned by my own. Print in TPU Material without support.
This part will serve as a replacement for the stock GoPro mount in order to provide a location for mounting a GPS module on a SpeedyBee Mario 5 frame. If anyone knows what filament SpeedyBee actually uses for their yellow parts please…
Side protectors designed to work with the SpeedyBee Mario 5 XH frame. Only tested with the XH frame, may also work with deadcat frame.
I wanted a light and compact way to mount the SpeedyBee F405 Wing Mini flight controller on my arrow shaft Slowstick bi-plane. There are two different orientations you can assemble the flight controller, standard and custom. Depending on…
I was looking for a mount for the SpeedyBee Wing, but I couldn't find one that integrated the GPS antenna and the RC receiver. So I drew my own.
Hey FPV Guys, it's a ugly quick'n'dirty combination of different Things. For the Speedybee Mario5 Frame: - WS Dual Antenna - XT60 Mountable Plug Connector - WS M181 GPS Print with TPU Infill 15% and Organic support
This is a mount which offers a couple of ways of securely holding the SBF405 Wing. I don't like attaching flight controllers to airplanes with just velcro/hook and loop because they are never securely held in place and the FC can sense…
plate with holes for mounting fc in airplace
Print with supports on build-plate only. I found a brim helps to keep it on the build plate.
Accessory kit for the Speedybee TX800 VTX. Print in TPU. Bottom print allows for a comfy softmount preventing damages on repetitive crashes, Top print fits any receiver with one or two ziptie to secure it in place. Hardware required :…
This is as close as possible to the original Speedybee VRX cover, the only difference being that is actually fits the HDZero Goggles :-) The pictures show slightly earlier version of the cover. I've moved the USB port 1mm to the side so…
Thanks to LoopFPV. Great TinkerCAD model that took less than a minute to make exactly what I wanted. FYI: The Hatchbox TPU does NOT match the yellow of the factory TPU parts. Printer brand: Creality Printer: Ender 3 Pro Supports: Yes…
22mm GPS mount for SpeedyBee Master 5 V2
Printed without supports in ABS. You can of course also use other materials.
Mount to place two Walksnail Avatar HD Kit V2 stock antennas on an Speedybee Master 5 V2 Frame.
A GPS mount for the speedybee Master 5 V2. Print it in TPU with 20% infill.
The original VTX mount for the SpeedyBee Bee35 only supports the DJI Air 03 unit. The new 04 unit is slightly bigger and has a different location for the USB port. This design is based on the original CNC machined mount but modified to…
I used PETG, 15 % infill, 0.2 Quality Standard. M3 + nuts. Print with support. F405 and GPS were getting hot, so I left holes and space for air to flow. 4 x M3x8 + nuts 2 x M3x8 + nuts
This remixed part will serve as a replacement for the stock GoPro mount in order to provide a location for mounting 15x15 mm HGLRC M100-MINI GPS module on a SpeedyBee Mario 5 frame.
Remixed SpeedyBee Mario 5 GPS Mount for the Foxeer M10Q 180 GPS
It is a Speedybee Mario 5 TPU design which has XT60 slot, 18mm GPS, and 2 SMA antenna
FPV SpeedyBee Mario 5 Custom TPU with follow parts: XT60 iFlight BLITZ M10 GPS V2 2 x SMA vertikal ELRS Antenna mount Short Video about this model you can find hier:
Cable cover designed to work with the SpeedyBee Mario 5 XH frame. Only tested on the X configuration . Design is slightly tapered from the base to the motor mount to contour to the shape of the arm. Included rings in the design to loop…
simple mount for screwing down a wing fc
Replaces the stock GPS mount that comes with the Bee35 frame for use with the BZ-181 GPS module.
The original walksnail module has to be removed from the case and inserted in the 3D printed part. the back plate is screwed with long thing screws, I believe I used M1.6x15. Better with self tapped screws since they are just going into…
This is a TPU grommet that slots in the frame of a SpeedyBee Master 5 HD to hold the XT60 lead securely. It also acts as a strain relief for the wires and the ESC. I had issues using the XT60 panel mount connector on the frame and been…
I had a different GPS and I wanted a good fit, since I have Fusion 360 and some 3d printers I decided to work one up. I printed in TPU, organic supports and 10% infill This is the one it is designed for GEPRC M8Q GPS Module-GLONASS…
Hey, I got this great frame which was missing tail with dual antennas for my Walksnail setup, so I decided to make one, I used stock tail mounting options so it will be straight fit.
Speedybee Mario 5 Fixed Angle Camera Mount Tested With RunCam Robin 3, could work with other 19mm FPV Cameras
This mount allows you to mount your 22x22x8mm GPS on the front of the Mario5 Frame. It is designed to fit the GEPRC M10 Series but works with other GPSs aswell. Just look out for the dimensions.
Dual foxeer omni antenna mount for Speedybee master 5 v2 Two different antenna angles, 30 and 45
This can be used to protect the arm of the speedybee Master 5 HD/Analog. Features: Clip on (no screws needed) Motor screws don't go thru the guard. If needed there is an option for zip tie . Print Settings Printer brand: Creality Printer:…
The Speedybee Bee35 frame comes with two options for the underside, where you mount the VTX - a single carbon fiber plate (basic version), or an aluminium CNC (Pro version). Neither fits the DJI O4 Air Pro properly unfortunately, because…
A mount for a vtx in speedybee mario 5, works with speedybee tx800 and m3 20x20 vtx's; it rises and moves back the vtx
Speedybee Mario 5 GoPro mount for GoPro Hero10 shape GoPro with a slot for a Team Black Sheep style ND Filter slot. It mounts the same as the original Speedybee Mario 5 mount. There are cutouts for access to the front screen and buttons…
This model is based on the original 181 SpeedyBee Master 5 V2 GPS mount.
Side shield to protect your FC. Only suitable for the pro version with the O3 aluminum fairing Printed in TPU small with supports Infill 100%
This is a mount for the Speedybee TX800 on the Speedybee Mario 5 Frame. It might work for other VTXs and frames. It steps down 25mm x 25mm M2 to 20mm x 20mm M3. My print settings: * 0.4 mm nozzle * 0.2 mm layer height * 4 walls * 20%…
A GPS mount for the Speedybee Mario 5 frame and the GEPRC GEP-M10 GPS and the DJI O3 unit. It is best printed with PLA or PETG and you should have plastic glue to glue the two halves together, it should also be printed with support
TPU material, no support required.
Hardware: UFL to SMA adapter required. Support my work: All of my models are available for free. If you'd like to show your appreciation, consider Buying Me A Coffee. Filament: TPU NOTE: If you want a Folding Dual Antenna mount, I've…
bottom plate meant to be glued to the base of your wing in some way. I have used 5 dots of hot glue. 4x m3x4.2 insert nuts needed 4x M3 6mm screw needed
For quicker GPS fix and to get the compass in Inav to work reliably. Compatibility: GPS size 25x25mm - Used with Flywoo GM10 PRO V3 GPS, and BZGNSS BZ-251 GPS (Original Mario Fold GPS) Support my work: All of my models are available for…
Speedybee Mario 5 gps mount Foxeer M10Q-180 and Flywoo GM10 mini V3 with compass
The small gps holder is designed for modules with a size of 18x18x5mm. (GOKU GM10 Mini V3) The bigger one for modules with a size of 25x25x8mm. (Foxeer M10Q 250) Printed in TPU 95A Supports are required.
A folding drone deserves a folding antenna mount. Pair it with 8-inch foldable propellers, and everything fits neatly into the original case—no need to remove props or antennas. Features: Compact and Lightweight for a foldable mount. Dual…
My SpeedyBee Bee35 came with a GPS mount TPU part for a smaller (I think 121) GPS module. I needed something slightly bigger, that also fits the specific connector geometry of the Walksnail WS-M181 GPS and compass module. In addition, I…
Dual antenna mount for SpeedyBee Mario 5 XH frame, ANTENNAS ONLY. This download contains 2 versions. Version 1 matches the default Mario 5 antenna mount profile. Version 2 is slimmer and has easy-install slots which prevent the need to…
SpeedyBee Master 3X XT60 with WS-181 mount for: - XT60EW-M ( aliexpress ) - GPS Walksnail WS-M181 GPS TPU printed
Hey guys, I just recieved my DJI O4 Air Unit Pro. Unfortunately Speedybee hasnt released 3D Printing files for a O4 Mount and you also cant buy a mount. So i designed this. Theres no support for the air intakes but the stack side plates…
Mario 5 Motor Arm Cable Clip – Easy Snap-On Design This custom 3D-printed cable holder is designed to neatly route and secure the motor wires on your drone. It features a simple snap-on clip mechanism, making it easy to install and remove…
3D printable mount for a SpeedyBee F405 Wing Mount. Also includes optional top mount for M100 GPS module. Required: M3 Inserts 5mm diameter M3 Screws. ~5mm without GPS and ~10mm with GPS mount.
Print in TPU without any support
Print with 3 walls and 2 top/bottom layers. Supports shouldn't be necessary. I printed the "SPEEDYBEE F405 MOUNT" in PETG but PLA should also work fine. The "GPS_MOUNT" should be printed in TPU but i haven't tried any other material. If…
This cover is designed to fit the Cobra X goggles to cover a SpeedyBee receiver. I printed PLA at 20% infill. I'm sure it would work with other filaments as well.
Bee25 mount for the DJI O4 Air Unit Pro I created two versions, v1 has “Zip Tie” antenna mounts - was trying to make a friction fit for the antenna but still requires a zip tie. Use this model if you don't want to take the o4's bottom…
This build is still a work in progress. I'm sharing parts here as I make them. Durable Max-height Antenna Mounting This Y-shaped antenna design minimizes drag while maximizing video reception and durability. It positions the stock DJI O4…
Add support for printing
Want to use Geprc GPS M10-DQ or it's variation (22x22mm ) with Speedybee35 ? This is right model for it. Use FLEX materials because the gps must bee pushed into the chassis and there are 4 holders on the edges.
This is model of antenna mount for Walksnail Moonlight - designated for Speedybee Mario 5 drone frame. Question :Why there is no place for GPS at the end of the antenna mount ? Answer: For better load distribution and better GPS signal…
Dual SMA Antenna Mount for SpeedyBee Master 5 V2 This is a custom-designed dual SMA antenna mount made specifically for the SpeedyBee Master 5 V2 frame. It holds two SMA connectors securely and is designed to fit the rear standoff spacing…
Hey guys, I just recieved my DJI O4 Air Unit Pro. I printed out the MARIO5-TPU-XT60_DJI_2 from Speedybee ( https://www.speedybee.com/mario-5-frame-download/ ) but the antennas were a little loose. So i designed these to give the antennas…
Simple wire protector for the Speedybee Master 5 HD frame, to stow away those cables nicely. TPU 98A or harder work to cover all 4 arms you'll have to print version A and B twice each. Category: R/C Vehicles
I find that the original model does not hold the camera sufficiently and we do not know what the angle of the camera is. At each encounter with the planet the camera is moved. I redesigned the support but with tilt angles defined and…
Eine harte sowie weiche Finne für den Mario 5. Zudem eine GoPro Halterung die Glatt und flach ist.
GPS mount for the GEPRC M10 module, designed to fit the popular SpeedyBee Mario 5 frame. The mount retains compat With the release of the new DJI O4 Pro Unit, a new mount for two antennas has been developed. Each antenna is secured using…
GPS mount for GEPRC M10, designed for SpeedyBee Mario 5 frame. Replaces the original action camera mount.
A simple bottom cover plate for the SpeedyBee Bee35 drone. This drone / frame comes with a CNC-cut aluminum bottom cover plate specifically designed for DJI O3 or similar-sized VTX modules. However, I was using it with an analog VTX…
Orientation of the Walksnail M181 will be CW0FLIP in betaflight for correct compass orientation. Make sure to follow Betaflight's magnetometer calibration before flight to ensure GPS is set up properly. No extension: Won't have the extra…
SpeedyBee Bee35 front XT60E-M mount. Remove 2 nuts from xt60 connector, and insert them into slots in part with same orientation. This part allows to move high current battery wires away from magnetometer in rear GPS module. V2 is version…
Remix of the original speedybee arm protection to overlap the top of the arms
replacement for the stock GoPro mount to mount a XT60 socket
remix for better fit of usb c in SpeedyBee f405 v4 FC
Basic GPS Mount with cable routing. It was designed for the HGLRC Mini M100 GPS Module. It can be printed in TPU without any Supports.
Piece to mount tof400c lidar below VTX in SpeedyBee Mario 5 DC frame. Lidar pointing down through hexagonal cut-out
DJI Action 2 Mount für SpeedyBee Bee35 Whoop. Dieser Mount ist stabiler und zugleich leichter als das beiliegende Teil des Bee35, da hier keine schraube notwendig ist. Der Winkel liegt bei 25 Grad fix Am besten mit TPU A95 gedruckt, bei…
This is an improved front bumper skid for the Speedybee Master 5 Frame. Should fit the V1 and V2, in the HD and Analog versions. This one wraps around the side of the aluminum camera mount to hold it more securely. I kept having the stock…
Various TPU parts I designed for the SpeedyBee FS225 Frame. To fit the original Caddx Vista antenna, I suggest you cut the TPU where I marked the red line with an exacto knife, spread and insert the antenna, and then superglue back the…
Model to print with solid plastic compared to the silicone OEM part. Intending to test flight controller performance
Just mirror the construction if you have the usb placed on the right side instead of left side. I print mine in yellow PETG.
Piece to mount XT60 and two moonlight unit antennas. You just need 2 zipties to mount the antenna. Print in TPU, walls count and infill density really deopends on Your material and how hard part You want. I use TPU varioshore at high…
Print from TPU
This is set of elements to replace front ALU part and mount caddx GM2 gimbal. For the mod You need: M2x10 screw 2pcs (or M1.4x6 if do not want to drill out threads to 2mm dia) 4 silicone dampers - dimensions as shown on pictures -…
My friend Ash (ashley_fpv on instagram) wanted to know if I could help her modify the existing SpeedyBee model for TrueRC antennas and a slightly bigger GPS. It turned out that the model didn't import well, so instead I used it to…
Runcam Thumb Mount for Speedybee Master 5 HD. Print in TPU.
This is a remix and I wanted to have some protection for the antenna especially the vertical placed one. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0.28 Filament: SaintSmart TPU RED…
Made these footpads as a replacement for the injection molded ones that come with the frame. These use no screws and just press in place, allowing for shorter screws to be used to fasten the motors. Needs to be printed in TPU. They are…
Install a rangefinder in the SpeedyBee Mario Fold 8 for accurate altitude measurement. The model is designed to mount the TF-Luna lidar longitudinally to the frame, utilizing the existing mounting holes that are spaced 25mm apart. It is…
Print from TPU, no supports. Mount with longer screws to the from of the frame use washers where possible.
GPS mount for the Speedybee Master 5 V2 frame, fits 15x15x5.5mm GPS modules.
