SPEEDYBEE F405 WING mount with GPS
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Universal SPEEDYBEE F405 WING mount with optional BZGNSS BZ-251 GPS mount.
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 118
- Makes
- 0
- Views
- 367
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
Print with 3 walls and 2 top/bottom layers. Supports shouldn't be necessary. I printed the "SPEEDYBEE F405 MOUNT" in PETG but PLA should also work fine. The "GPS_MOUNT" should be printed in TPU but i haven't tried any other material.
If you don't want the GPS mount, you can print the "SPEEDYBEE F405 MOUNT CUP NO GPS" in any material.
Just glue the mount to your air frame
I also uploaded the .step file in case you want to make changes to the design.
Use 4x 3Mx8 mm screws for the top part, the screw length can also be longer (up to 15mm).
My Flight Controller is the SpeedyBee F405 WING APP Fixed Wing Flight Controller: https://www.speedybee.com/speedybee-f405-wing-app-fixed-wing-flight-controller/
My GPS is the BZGNSS BZ-251 GPS with 5883 Compass: https://www.speedybee.com/bzgnss-bz-251-gps-with-5883-compass/