Caddx Walksnail Ascent Lite+ VTX Swappable Mounting Pod
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mounting system for the Ascent Lite+ VTX. It works with my other version for the Ascent Lite.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 57
- Makes
- 0
- Views
- 217
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Share Alike
Print in something with higher heat resistance than PLA. I printed in ASA for lightness, heat and UV resistance.
Attach VTX to the Body Lite+ with 2 of the short screws included in the kit.
The Cam-Top attaches to the Body with 4* M3 screws. Camera attaches using 2 short screws supplied with VTX.
Glue the Slider Lite+ to the bottom of the Body Lite+. If you do not need the swapping ability you can leave the Slider off and attach Body Lite+ directly to vehicle.
Attach the Vehicle-Mount to the plane, truck or whatever using zip-ties, velcro strap or glue.
Slide assembled pod onto the Vehicle-Mount and secure with a long screw included in kit or a M2*6 screw.