Counting matching models…
VTX Bracket for FlyLens 85 with Walksnail Mini+Moonlight 4K Upgrade Kit
Print approx. €0.48–€0.59 excl. taxPreliminary estimate for one variant
These side plates are designed for my iFlight Nazgul Eco DC 5" FPV drone to protect the electronics from debris while providing easy access to the FC's USB port and the VTX's SD card slot. At the front, there is a space for the Vifly GPS…
Print approx. €1.10–€1.35 excl. taxPreliminary estimate for PETGSource material: PET
Companion project to my other parametric configurable FPV designs: Pod | O4 | Frame Whoop Action2 , 3-5 AcePro GoPro Mini Hero 9-12 Antenna Mount Protect your FPV camera with TPU in front of the lens for maximum protection but still with…
Just a simple mount for the Walksnail VTX and new Caddx GM3 Gimbal that you can use or modify to fit your needs. It has an additional mount for 40mm cooling fan, because the Moonlight VTX heats up very quickly without an active airflow.…
Pretty simple to print. 0.2mm layer height and I do three walls. You can mount it to the camera with screws (if you have some small enough) or glue. I prefer using glue and I haven't had any issues with it yet. I've printed it in TPU,…
Companion project to my other parametric configurable FPV designs: Pod | O4 | Frame Whoop Action2 , 3-5 AcePro GoPro Mini Hero 9-12 Antenna Mount Get your perfect antenna setup for your FPV drone. Mix-and-match from 80 frames, 50…
This mount is suitable for 19mm cameras with two screws on one side. I created it especially for walksnail cameras that you want to mount on Geprc mark4 I used Prusament red PLA, but you can use some flexible material instead ;) I also…
25.5х25.5 Canopy Walksnail 1S lite kit camera (mobula, meteor etc) Weight = 1.7g Angle = 30
Quick release (keyed-slot) analog module bay for Walksnail Goggles X and DJI V2. Have a look at the awesome original model first. This remix replaces the main body and the “B” mount adapter plate that gets screwed to the back of the main…
Walksnail VTX 1s Lite camera mounts adapters Notes Caddx should provide this mount in the product package :-( ... extra mount holes for canopy to choose from (and the center one as well) compatible to 14x14mm and 19x19mm camera mounts…
Just a basic cover to protect the lenses and infrared sensor. Print in TPU with 10-20% infill.
buymeacoffee.com/dgfpv this is the version 2 of my walksnail vtx protection mount. i have changed the overall design, added 0.4mm walls to make them slightly stiffer, also added 20x20 mounting holes for the walksnail vtx v2
CaddxFPV Walksnail Moonlight VTX Mount for TBS Source One V5 Made possible with @Dtuned_2160698 Features: Full protection of the Moonlight Support dual antennae setup Cutouts for port access Slit and zip tie step for easy and flexible…
UPDATED 3/13/2024: Verified VTX shell dimensions. Uploaded f3d option. ND Filter may need slight tolerance adjustment (or my 3d printer needs calibration...)
Walksnail VRX adapter for Skyzone O4X goggle. Also include exhaust without mount for remix to other adapter
A simple protector for the lens of walksnail/fatshark FPV goggle There's second version which is smaller and holds using the lenses themselves instead of the rubber glued next to them. This can potentially avoid people breaking that…
Mein erster Versuch einen Walksnail/ELRS Antennen Mount für einen GepRC Mark4 Frame zu konstruieren. My first attempt at constructing a Walksnail/ELRS antenna mount for an GepRC Mark4 frame. Print Settings Printer Brand: Creality Printer:…
Canopy for the Meteor85 frame by BetaFPV to fit a Walksnail 1S VTX and its 14mm camera.
Here is another tripod mount for the MFD Crossbow Mini AAT. This one you're able to use either the SIYI HM30 video link, HDZero VRX, or the Walksnail VRX. I made the HDZero and Walksnail VRXs slide in type mounts. The HM30 uses a ¼ 20…
Mount to place two Walksnail Avatar HD Kit V2 stock antennas on an Speedybee Master 5 V2 Frame.
fits the following Walksnail Avatar Caddx cameras with 14mm camera lens body Walksnail Avatar HD Nano Camera V3 Walksnail Avatar HD Mini 1s Lite Camera Walksnail Avatar HD Micro Camera Walksnail Avatar HD Pro Camera Walksnail Avatar HD…
Walksnail VRX front mod sma connector v2 fits better
That's my variant of the original canopy. I've added holder for 2 antennas and a GPS. Printed in TPU, will see how it holds. GPS used: Foxeer M10Q-120 ← this is my go to for small quads. Amazing performance.…
Print Settings Printer brand: Kingroon Printer: Kingroon KP3S Rafts: No Supports: No Resolution: 0.2 Infill: 100% Filament material: TPU Filament brand: Kingroon
I like the whoop canopy made by happymodel and also saw that rotor riot develop a tpu version for their vision whoop, but I don't like how heavy it is. So I created my own version which weighs less and protects hdzero v3 cams better. Some…
An antenna mount for TBS Source One V5 Printed in TPU95A with supports
Mounts to repair / replace fragile stock mount *New versions added @ 9:35 GMT
This is a solid platform for mounting your Walksnail hd Avatar VTX kit to Sonicmodel AR wing 900. Fits perfectly nose for session camera. Just use a couple of drops of UHU Por to glue it to EPP. I strongly suggest to print it from at…
The mount uses the stock screw holes on the back of the Walksnail VRX, but the screws will need to be replaced with longer ones. The stock screws are a different pitch, but I found that M2's hold in the plastic just fine. This mount is…
Printed from ABS or PETG for optimal strength. Friction fit to the camera lens and body. Adapted the design to fit on the Walksnail Pro Camera or any other 14mm camera. Simply cut it to length for shorter lenses like on the original cam.
Ideally printed in PLA and moulded to the casing (heating the part with a blow dryer before). Mirror part to suitable for both sides of the headset.
buymeacoffee.com/dgfpv this is meant to be printed in tpu. The nose on the back should be pushed in the infrared sensor between the lenses.
Print with PLA or PETG. Slide into existing single antenna mount.
The original walksnail module has to be removed from the case and inserted in the 3D printed part. the back plate is screwed with long thing screws, I believe I used M1.6x15. Better with self tapped screws since they are just going into…
Print in tpu, and press fit over the knurled focus tightening ring with the tabs facing towards the camera pcb (this will space the canopy out nicely for the mobula6 hdzero canopy) Should weigh 0.15g when printed in tpu95a Be sure to fit…
An Walksnail Avatar antenna mount for TBS source one v5 drone frame
Walksnail antenna mount for the apex. EDIT: Added a mount for the HD apex as well.
when you insert the inner strap loop through the goggles loop, you'll need to fold the little tab at the bottom and squeeze it through the goggles loop.
Here's my version of Walksnail Avatar VRX front cover: It adds 2x SMA ports on the sides. Special tabs are designed to securely lock the SMA connector on the inside and prevent it from twisting. You will need slightly longer pigtails, I…
Here is my gps mount that will fit any quadcopter that has a 32mm spacing back plate and 20 mm standoffs. was designed for the AOS series of qaud copters but will fit anything that has a back spacing of 32mm. printed with ninja flex…
These parts are shown in more detail in this video - Print the VTX mount with the slanted part, front end, down on the print bed. It prints with no supports that way. Trim the fuselage front so the mount slides in with some friction to…
Printed mine in sainsmart TPU 2 versions, one which has a 3mm antenna tube for the bundled single antenna ELRS, other one is just for walksnail.
Lightweight and low profile version of an all in one Walksnail Avatar VTX mount. Camera can be adjusted up and down. VTX mounts with screws provided with VTX using the 20x20mm mounting points. Use 3mm screws to mount the pod, or…
I reuploaded the models to printables since most people are using printables or thingiverse. All credits to CaddxFPV and Walksnail
added the Logo to the protection and shortened the protection by 2.5mm to make it a bit looser fit. probs to NordFPV for the design. https://www.printables.com/model/244448-walksnail-fpv-goggle-protector
Replacement nose for the Heewing T2 Cruza. I wanted more air for my VTX and this is what I came up with. It's a little heavier than the foam nose of course. Depending on how you plan to set it up the minimum hardware you'll need are 4 -…
This is a small print with fine details - use the highest quality you can and 100% infill Replacement bracket for the Walksnail VRX mounting bracket which is prone to break at the mounting screw. Rafts: No Supports: No Resolution: High…
When I first printed the original model and attached the Walksnail VRX to it, I found the VRX didn't quite sit flush on my Fatshark Attitude V6 due to the length of mount, so I added a couple of millimetres to give it some more space.…
Walksnail Avatar V2 VTX with HD Camera
Habe ein paar Teile gemacht, um für meinen Mobula 8 ein Walksnail Avtar mini 1s zu adaptieren. Der Mobula kam mit dem Frame für das DJI O3 light, ich wollte das aber mit dem Mini 1s von Walksnail ausrüsten. Nach einem ersten Versuch mit…
walksnail vrx front mod .step file
A protected walksnail VTX antenna mount printed in TPU. Printed in fillamentum TPU 98A.
UPDATE 11 April 2023: I have added .3mf and .step files of a modification that will fit the new Avatar Pro camera (the one that works in super low-light, it has a longer lens so it needed some extra material in the tunnel, otherwise all…
Converting my QAV-S JB to Walksnail Avatar, I wasn't able to find a dual antenna mount, so I decided to quickly put one together. I printed the part with 100% infill and 100% part cooling to, so the steep overhang prints properly. Make…
I find the default fit on the Walksnail goggles X very uncomfortable – they press on my nose. Theses shims will tilt the goggles up a notch, making them very comfortable to wear, with no light leak. I installed them by applying sticky…
walksnail 1s horizontal cam mount
This is the remix of original camera holder from BetaFPV that fits better Walksnail Moonlight Camera. It moves camera position down a few millimeters to allow camera rotation at any angle, and extends the camera protection to make your…
You'll need to trim some foam from the canopy and glue the insert in place. I placed mine so the front of the insert is about 10mm behind where the air intake stops. Trim the hole a bit small at first then fine tune for a snug fit, it's…
Hallo, das ist eine Schnellwecheslplattform für das Walksnail FPV System. Es soll das Welcheseln der FPV Komponenten zu einem Anderen Flieger möglichst einfach und schnell ermöglichen. Das Walksnailsystem wir mittels Kabel An und…
tpu recommendet. infill as you like. maybe use some sort of velcro or double sided tape to get it fixated :).
Print in TPU 98 100% infill Organic support Use appropriate m2 screws and nuts Dont screw the vtx directly on the frame, leave it loose.
The adapter for Walksnail Moonlight VTX to fit perfectly into your Pavo25 V2 drone. It allows you to put the VTX a little higher than it's designed for DJI VTX, but keeps it tight in place and protects from ground. It gives great access…
TPU accessories designed for Pavo20 Walksnail 1s built use M2x12 to mount VTX to 20 - 25 TPU adapter use M2x6 to mount 20 - 25 TPU adapter to carbon adapter thread antenna holder through square hole at the back for Dipole antenna
Rugged case for the Walksnail Avatar Googles I was looking for a case which fits the googles with antennas attached, as I don't want to screw them on every time I go flying. The Top and Bottom can be fit with some foam pieces to prevent…
UPDATE 19/12/23: Dual antenna VTX mount added This model allows a Walksnail VTX to be mounted in a 30.5x30.5 hole spacing while not requiring any screws to mount it. The top folds over the VTX and locks in on itself to secure the vtx in…
bottom plate meant to be glued to the base of your wing in some way. I have used 5 dots of hot glue. 4x m3x4.2 insert nuts needed 4x M3 6mm screw needed
The main body of this canopy secures the antenna and camera to the frame. I printed this portion with PETG-CF, although any PETG or ABS should be fine. Use 4 m2 heat set inserts (up to 4mm tall) for the mounting holes. The TPU bumper is…
Mount to place two Walksnail V2 stock antennas on an ImpulseRC Apex. Mounts the same as the stock antenna mount. Also works with my GPS/USBC mount I find printing it standing on edge with antenna mounts straight up and supports on bed…
Raw material: TPU95A Esun No supports Print speed 30 mm/s Layer height 0.17
Walksnail Goggle X analog adapter Uruav AKK&Pro58
This is a simple Camera Protection for the Avatar HD v2. It weights half a gram. It has a small edge so that it easily snaps into the lens and stays in place. I printed in TPU. 0.2 layer
This is a slidable version of the Walksnail VRX mount which I use to mount the VRX with velcro. I didn't like having to bend the clips on and off and this just seemed easier.
This is work in progress-- A simple lens cover for the Walksnail Google X. Print in TPU Since this is a WIP, please print and report is the shape is working fine. I don't have the goggles myself yet and I work from a description from a…
Print standing. Support needed… Needs some gentle force to pass through.
Print in TPU 98 100% infill Organic support
Remix Original Designer Whitespace 💗 Features: 25.5mm x 25.5mm Mounting Space inside for RX and ESC Canopy, Still need to test the Canopy About ~87g Parts I used: Receiver TBS CROSSFIRE NANO RX ESC DYS XSD 7A BLheli_S Servo PES GH-S37A…
I designed this mount for the Walksnail micro camera to mount on top of a servo so you can pan left to right using a 280 degree servo. I glued a circular servo arm to the bottom of the mount that you can then screw onto the servo, for a…
Mounting bracket for walksnail avatar vtx, specially designed for mamba f722 wing fc but can be used with any 20mm mounting holes. Designed with 10m standoffs to make room for servo connectors.
I've got an Axial Wraith that I built a long time ago and have gone through a few variations of FPV systems. I recently swapped out a Caddx Vista for a Walksnail V2 because of the really great night vision on the Pro Camera. However, a…
This is a dual antenna mount for the Walksnail Avatar HD system with two antennas. There's a version without support and a version with longer antenna sleeves which require support. Have fun! Print Settings Printer: Self built Rafts: No…
Designed to be easy to print with no supports or brim. Print at 90-100% infill with PLA+. You'll want the gummies in your unit. I found the easiest way was to use fine point tweezers to start them in the holes and then your fingers to…
Mounting the Goggle X Extension Board on top of the goggles as Caddx suggests makes the extension board really look like an afterthought. I've designed this housing to replace the right (screens facing you) Goggle LED panel. This module…
I wanted something a little more secure to hold my Walksnail VRX onto a tripod. The base has a hole for a ¼-20 threaded insert and an M3 insert for the clip. I'll admit I may have left the holes for the threaded inserts a bit small. The…
If you like it - please click ‘Like’ and download to support my designs ;-). Using PnP version make sure there is silicone dumpers on both VTX board sides so the board DO NOT TOUCH canopy or screw. If you can use metal nuts (not nylon) if…
Print in TPU 98 0.20 100% infill
This is a replacement VTX cage for the Pavo20 Pro frame. I bought the frame to build my own version using the Walksnail Moonlight Kit, since that’s the FPV system I prefer. The cage is fairly robust, with a dry weight on the drone coming…
Mein erster Versuch einen Walksnail/ELRS Antennen Mount für einen AOS 5 Frame zu konstruieren. My first attempt at constructing a Walksnail/ELRS antenna mount for an AOS 5 frame. Print Settings Printer Brand: Creality Printer: CR-10…
There are plenty of canopies out there, but none which is big enough to house a beeper and a receiver. It has a fixed camera angle of 25 degrees, which I prefer on slower toothpick style quads. You need two screws to attach the camera to…
This is a mount/holder for walksnail antennas to fit standoffs that have 20mm distance between each other. There's a bunch of models that are available online but none of them fitted. I decided to create my own from scratch. It fits…
A small connector that allows the VRX mount to be connected to a GoPro mount Print Settings Printer: Elegoo Neptune 3 Pro Rafts: No Supports: No Resolution: High Infill: 100% Filament: esun PLA Black Category: R/C Vehicles
This is a tray intended to make for a cleaner mount of the Walksnail VTX onto the Atomrc Swordfish. It fits into the fuselage using the stock nylon screw, and holds the transmitter, as well as the antennas. The transmitter is placed high…
🚀 Elevate Your Goggle Game: Walksnail Goggle X TrueRC Patch Holders! 🚀 Ahoy, drone enthusiasts! Tired of those clunky antennas making your Walksnail Goggle X unnecessarily bulky? Say goodbye to the oversized look and hello to sleekness…
Includes updated V3 board, which is nearly identical to the newest 1S VTX Board.
I took the “thick” version of Vladamyr https://www.printables.com/model/788874-flylens7585-dji-o3-vtx-guard after asking permission and I remixed to fit the Walksnail mini vtx V3, I reduced the cage height sincethe avatar mini is not as…
ND Filter cover for Walksnail Moonlight Kit. 1st revision. I will make some improvments in the future
This is a two part body that alllows the use of the Foxeer Wildfire cover by LordKokosnuss https://www.thingiverse.com/thing:5814297 Download file includes the above cover. It does require the base to be superglued to the main body so…
Print in something with higher heat resistance than PLA. I printed in ASA for lightness, heat and UV resistance. Attach VTX to the Body with 4* M3x4 or M3x6 screws. The Cam-Top attaches to the Body with 4* M3 screws. Camera attaches using…
This compact Avatar GT video transmitter mount is designed to optimize space by aligning the antenna holder directly with the video transmitter. It features 20 x 20 mm mounting holes and a raised platform with ventilation slots to improve…
