Walksnail Avatar HD Goggles X Module Bay
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.71 – €0.87 net (excluding VAT)
For file: CE3PRO_goggle_x_analog_module_bay.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.79 excluding VAT (range midpoint).
- Weight reported by the author
- 6 g
- Print time reported by the author
- 1 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Analog module bay using the Goggles X Extension Board.
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 132
- Makes
- 0
- Views
- 800
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
Mounting the Goggle X Extension Board on top of the goggles as Caddx suggests makes the extension board really look like an afterthought. I've designed this housing to replace the right (screens facing you) Goggle LED panel. This module bay clips in place into the goggles just as the LED panel does. Installed module bay is slim enough to fit in the original case albeit without a module installed.
Print:
1x Walksnail Avatar HD Goggles X Module Bay (new housing) *clip at top of module bay may require supports
2x washers
Installation:
- Dissasemble housing of Goggle X Extension board (remove 2 screws on bottom)
- Place Goggle X Extension board inside the 3d printed housing, install the 2 screws with washers.
- Dissassemble Goggles X, removing right (screens facing you) Goggle LED panel.
- Clip module bay into place, reassemble Goggles X.
I've also included step files for this housing and step files for a copy of top of the housing that caddx supplies if anyone wants to design a different housing.
Massive shoutout to Caddx for providing the Goggles X LED 3D Model
https://caddxfpv.com/pages/download-center