Walksnail Avatar HD Goggles X Module Bay
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Analog module bay using the Goggles X Extension Board.
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 129
- Wydruki
- 0
- Wyświetlenia
- 790
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Mounting the Goggle X Extension Board on top of the goggles as Caddx suggests makes the extension board really look like an afterthought. I've designed this housing to replace the right (screens facing you) Goggle LED panel. This module bay clips in place into the goggles just as the LED panel does. Installed module bay is slim enough to fit in the original case albeit without a module installed.
Print:
1x Walksnail Avatar HD Goggles X Module Bay (new housing) *clip at top of module bay may require supports
2x washers
Installation:
- Dissasemble housing of Goggle X Extension board (remove 2 screws on bottom)
- Place Goggle X Extension board inside the 3d printed housing, install the 2 screws with washers.
- Dissassemble Goggles X, removing right (screens facing you) Goggle LED panel.
- Clip module bay into place, reassemble Goggles X.
I've also included step files for this housing and step files for a copy of top of the housing that caddx supplies if anyone wants to design a different housing.
Massive shoutout to Caddx for providing the Goggles X LED 3D Model
https://caddxfpv.com/pages/download-center