1 / 3
Lumenier QAV-S JB Edition Walksnail Antenna Mount — image 1
1 / 3

Lumenier QAV-S JB Edition Walksnail Antenna Mount

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a simple mount for the two antennas of the Walksnail system. It's a tight fit, but the wires have enough space.

Rating
0 / 5
Likes
11
Downloads
167
Makes
0
Views
894
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

Converting my QAV-S JB to Walksnail Avatar, I wasn't able to find a dual antenna mount, so I decided to quickly put one together.

I printed the part with 100% infill and 100% part cooling to, so the steep overhang prints properly. Make sure to push the antennas all the way in (not like in the photos) for better prop clearance. 

The ELRS Mount at the bottom is designed by bsheeley20 and can be found here. I cut the top off their model to fit the antenna mount above.

Tags