1 / 3
Lumenier QAV-S JB Edition Walksnail Antenna Mount — zdjęcie 1
1 / 3

Lumenier QAV-S JB Edition Walksnail Antenna Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a simple mount for the two antennas of the Walksnail system. It's a tight fit, but the wires have enough space.

Ocena
0 / 5
Polubienia
11
Pobrania
167
Wydruki
0
Wyświetlenia
889
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Share Alike

Converting my QAV-S JB to Walksnail Avatar, I wasn't able to find a dual antenna mount, so I decided to quickly put one together.

I printed the part with 100% infill and 100% part cooling to, so the steep overhang prints properly. Make sure to push the antennas all the way in (not like in the photos) for better prop clearance. 

The ELRS Mount at the bottom is designed by bsheeley20 and can be found here. I cut the top off their model to fit the antenna mount above.

Tagi