Liczymy pasujące modele…
I designed this part to fit my DJI O3 Air Unit. As you can see on the pictures the big ass box fits right behind the cam. I used double sided sandwich tape in-between to stick it to the upper frame part and secured it with a zip tie. I…
Converting my QAV-S JB to Walksnail Avatar, I wasn't able to find a dual antenna mount, so I decided to quickly put one together. I printed the part with 100% infill and 100% part cooling to, so the steep overhang prints properly. Make…
simple model
Update: new v4 added. Changed directions of antenna, and made it easier to plug them in. Plus possibility to add a PCB LED strip (Lumenier Digital RGB Arm LED Board) This is a remix from drewzh (thanks mate). His intentional design was…
Support en TPU pour avancer la gopro et laisser place a une batterie plus longue à l'arrière de la gopro. de plus ce support apporte une bien plus grande rigidité pour la gopro et évite les vibrations. EN : TPU mount to move the GoPro…
Lumenier QAV-S Mini 4" Freestyle Frame Skids After beating up my drone for a few flights (top mounted battery setup) I designed some skids. These can be printed in almost any filament type, but I've found that TPU is more durable. I…
Originally designed for the lumenier QAV-S 2 JB edition, but it should work for any 6mm standoffs with 19mm spacing. Printed in TPU with supports
Small lightweight Caddx Vista antenna mount for the lumenier QAV-S 5'' quad. Printed in TPU with a 0.2mm layer height, 20% infill, no supports needed. Antenna is mounted with two M2 x 8 screws and two lock nuts. Print Settings Rafts: No…
Antenna holder for TBS. Keeps enough space for DJI O3. Antenna is sturdy mounted on the frame. I printed it with Ninjaflex TPU which works great. Support is needed. Betaflight Dump for anyone cine like fpv setup. Aikon F7 AIO 4S with 1404…
Remix of: https://www.thingiverse.com/thing:4936338/files Lumenier QAV-S JohnnyFPV Special Edition Hero 8 Mount
This is a 30 degree camera mount designed for the Lumenier QAV-R to suit the Runcam 3 or GoPro Session cameras. It has been designed to take mounting straps up to 20mm wide. Print Settings Printer Brand: Creality Printer: CR-10S Rafts: No…
Lumenier QAV-PRO 3.5" Mini Whoop - Immortal T Crossfire Mount and DJI O3 Air Unit Isolation Pad
I intended to utilize my HDZero Nano v2 Cam in my Lumenier QAV-PRO Micro Whoop 2.5'' drone. I printed it in PLA, and it functions well. Additionally, it offers some protection for the camera and can be securely fastened using the original…
Iflight XL5 Lumenier AXII 2 Antenna
Iflight XL5 Lumenier AXII Single Antenna Mount
Tiny mount for the Lumenier QAV-PRO Micro Whoop 2.5'' Micro frame. Allows you to mount: HDZero Whoop LITE VTX TBS Crossfire NanoRX Best printed in TPU, see pictures for assembly.
other side has to be mirrored in slicer for clean nanoRX installation i recommend this print https://www.thingiverse.com/thing:4731250 if you like this give me a sub on IG or YT https://www.instagram.com/martymcfly_fpv…
Second Version of my Runcam Thumb Pro Baseplate for the Lumenier QAV-S Bardwell Edition FPV Frame I have to reprint mine so I make a few improvements. The Cam is more in the front. The Screw-Holes are tighter A Version with a mount for a…
This is a gopro mount for lumenier QAV-S I made for mine because I have telesin nd filters. The mount has a 30° angle.
printed in tpu with little support if you like this give me a sub on IG or YT https://www.instagram.com/martymcfly_fpv https://www.youtube.com/channel/UC0Ps_VxWIuz_74Qz01wQ68w Category: 3D Printing
Beefier ducts for the FPV Lumenier QAV- Cine 3
Skitzo Nova Lumenier AXii VTX & RX Antenna Holder Mount for Racing Quad Halter für das SMA pigtail (2x3m Schrauben) und RX Antenne mit 90 ° Winkel und XT60 Kabel das Pigtail wurde etwas im winkel nach unten vesetzt sodass die Antenne…
It fits very well. It is hold by 2 zip ties. That was the only possible way for me. I used 3DJake A95 TPU Blue. Hope I could help you out. :)
printed in tpu 0.32 layerheight .. lay on side... rear is mounted with ziptie for any kinds of gopro... i use it without battery powered by iflight balancer cable. 1405 4800kv t-motor and gemfan d63 .. works flawless angle 15° if you like…
The GPS mount is made for the TBS M8 GPS.
Lumenier RID - Remote ID Mount for 10mm Carbon tube Frame. It came from the GetFPV website as a free downloadable stl.
Got asked about a Hero 7 Mount for the Lumenier Chief Racing Frame at 45 degrees. Well, no guarantees, as I neither fly the frame nor the Camera myself, but here you go, remixed an sturdy-looking existing Hero 7 Mount with the baseplate…
Lumenier QUV-S 2 Joshua Bardwell edition Gopro Hero 8 mount 22.5 degree ND filter compatible Printed in TPU
Foxeer Lollipop mount for QAV-X/XS Racepod. Category: R/C Vehicles
Pic is printed in PLA .16 mm Sand edges of print and clear part of antenna cap. Attach with CA glue.
This is a protective reinforcement tube designed for Lumenier AX-II antennas . The tube slides over the antenna cable and clips directly onto the SMA connector , providing additional support and reducing stress on the coaxial cable near…
Whoop-style enclosed protection around propellers for safety & stability Optimized for 5-inch props — strong arm geometry, low resonance DXF files ready for laser cutting carbon fiber or acrylic STEP file for CAD editing, CNC machining,…
Print it with around 20% infill in order to make it lighter and so that it will better absorb shocks.
Mount for Lumenier VTX, 30mm spacing between mounts. Made for H210 frame. Working on Ver. 2 of this. Coming soon Print Settings Printer: Micromake D1 Resolution: .2 Infill: 20% Post-Printing just clean up edges and trim to fit Category:…
Simple antenna mount for Lumenier QAV-S (Joshua Bardwell Edition) frame.
