1 / 5
Lumenier qav-pro micro whoop DJI O3 Air Unit — zdjęcie 1
1 / 5

Lumenier qav-pro micro whoop DJI O3 Air Unit

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mount to fit DJI O3 Air Unit to the qav-pro micro whoop

Ocena
5 / 5
Polubienia
22
Pobrania
362
Wydruki
1
Wyświetlenia
3697
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I designed this part to fit my DJI O3 Air Unit. As you can see on the pictures the big ass box fits right behind the cam. I used double sided sandwich tape in-between to stick it to the upper frame part and secured it with a zip tie.

I used TPU → Ninjaflex for this. But everything with a shore hardness of around 83A should work. Should probably be no problem if your material is harder or softer. You can adjust this with your infill settings.
I printed this with normal 15% infill at 0.15 mm Layerheight. 


If you have questions regarding a good setup for this quad hit me up.

Tagi