2 Material Walksnail Canopy for Pavo 20 Pro
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
2 piece canopy for the pavo20 pro using a stiff filament for the main structure and TPU for bumpers/lens guards
- Rating
- 5 / 5
- Likes
- 13
- Downloads
- 153
- Makes
- 1
- Views
- 754
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Public Domain
The main body of this canopy secures the antenna and camera to the frame. I printed this portion with PETG-CF, although any PETG or ABS should be fine.
Use 4 m2 heat set inserts (up to 4mm tall) for the mounting holes.
The TPU bumper is printed with 95A hardness TPU, and must be bent considerably to fit into place. The camera screws go through the TPU, so no glue is required.
Finally, there is a small spacer which allows you to use the screws that come with the pavo20 pro to mount the walksnail vtx without the screws bottoming out.