LayersFactory
Report model
1 / 4
Bike - Quick-Release Handlebar Mount - Cygolite Dash Front Light — image 1
1 / 4

Bike - Quick-Release Handlebar Mount - Cygolite Dash Front Light

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Preliminary estimate for PETG

€1.17 – €1.43 net (excluding VAT)

For file: cygotlite_31_8mm_mount_v2_0.2mm_PETG_MINI_1h32m.gcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €1.30 excluding VAT (range midpoint).

Weight reported by the author
12 g
Print time reported by the author
1.54 hr
Source material
PET
Estimate material
PETG
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

bjamdesign

bjamdesign

@bjamdesign

A bolt-on quick-release mount for the Cygolite Dash LED bike light. Replaces rubber band style mount.

Rating
5 / 5
Likes
55
Downloads
239
Makes
4
Views
2,780
Reviews
4

Updated at source:

Model information

Source
Printables
Category
Outdoor Sports
License
Creative Commons — Attribution — Noncommercial — Share Alike
DetailsFiles (18)Makes & comments (Makes: 4) (Comments: 7)Remixes (1)Collections (66)Related

A bolt-on quick-release mount for the Cygolite Dash bike light to replace the stock rubber strap that would not keep the light in place. 

  • Trail approved!
  • One-handed quick-release!
  • Minimal footprint!
  • Easy installation without removing grips!

Want just the magic behind that quick release?  Check the models for the Universal Quick-Release

Parts

Hardware

  • V1
    • 1x M3 hexnut
    • 1x M3 8mm socket head bolt
  • V2
    • 1x M4 hexnut
    • 1x M4 12mm socket head bolt
  • V3
    • 1x M4 square nut
    • 1x M4 12mm socket head bolt

Printed

  1. Ring Mount - Handlebar diameter in file name i.e. 31_8mm.
  2. Light Mount 
  3. Quick-Release Bar

 

Print Settings

IMPORTANT NOTE: Print orientation is critical to provide the required flexibility and strength. See .gcode print files for orientation and mouse ears for bed adhesion.  V3 models have some partial brim for small part printability that should be removed before assembly.

  • Filament: PETG or PETG-CF.  PLA not recommended
  • Supports: NO supports required
  • Perimeters: 3+
  • Infill: 
    • Ring Mount 40%
    • Light Mount 40%
    • Quick-Release Bar 100%

Assembly/Installation

See photos for reference.

  1. remove existing rubber strap mount from light.  Keep original M3 6mm button head bolt.
  2. place Quick-Release Bar into Light Mount
  3. insert original M3 6mm button head bolt assembly in previous step, and into the bottom of the Cygolite Dash light
  4. install nut in Ring Mount
  5. install Ring Mount on handlebar 
  6. insert socket head bolt into Ring Mount
  7. slide light assembly onto Ring Mount

Updates

2024-01-01 

  • added V3 model
    • updated for M4 square nut
      • 3mm hex wrenches are more common on bike tools
    • updated model for printability
      • included partial brims for small parts
      • removed overhangs of round holes
  • updated description

2022-02-27 - added v2 model

  • added V2 model
    • updated for M4 sockethead bolts
      • 3mm hex wrenches are more common on bike tools
    • increased ring width to 12mm
      • required to accommodate M4 hardware
      • marginally improved stiffness

Inspired by 

Tags

lightledbikemountbikemtbhandlebargravelroadbike