Clona na svítilnu, visor for light Fenix BC26R
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.79 – €0.97 net (excluding VAT)
For file: fenix_clona_0.4n_0.2mm_PETG_MINIIS_1h1m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.88 excluding VAT (range midpoint).
- Weight reported by the author
- 9 g
- Print time reported by the author
- 1.01 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Clona (kšilt) na svítilnu Fenix BC26R pomáha snížit oslnění účastníků provozu v protisměru. Visor for Fenix BC26R.
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 58
- Makes
- 1
- Views
- 542
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
Clona (kšilt) na svítilnu Fenix BC26R pomáha snížit oslnění účastníků provozu v protisměru.
Doplnil jsem i logo firmy Fenix, které lze v projektu odstranit.
Model je prototyp, který bude teprve testován v terénu.
Doplňující clonu (doplněk) doporučuji přilepit.
The visor helps protect pedestrians and car drivers from reverse side.
I also add Fenix logo you can remove in project.
Model is still prototype and will be test, soon.
To addon recommend use glue.

Tisknout na hladkou podložku, viz obrázek s minimálními podporami z PET-G nebo ASA.
Recommend print with minimal support like on screen from PET-G or ASA.

Pohled na kužel světla bez doplňku.
Visor view without addon.

Porovnání bez clony a s nasazenou clonou na minimum a maximum bez doplňku.
Compare without visor and with min and max visor on without addon.
