Stackable see-through tealight
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.57 – €0.70 net (excluding VAT)
For file: p6_0.6n_0.15mm_PLA_MK3S_35m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.63 excluding VAT (range midpoint).
- Weight reported by the author
- 9 g
- Print time reported by the author
- 34.8 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Tealight candleholder made of 7 stackable discs'
- Rating
- 5 / 5
- Likes
- 49
- Downloads
- 107
- Makes
- 2
- Views
- 683
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
If you have a good first layer then you should be able to print 5 parts at once. I don't have a good enough first layer to do so.
Print with at least 0.15 mm layer height to ensure the pins on the plates are smooth. And use a lower printing temperature than you normal would to avoid stringing between the pins.
The two different model can be mixed together since the pin placement are identical on both versions.
You can glue them together if needed, but the design is quite stable as it is.
