Replacement Lawn Light Stake
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.10 – €1.35 net (excluding VAT)
For file: Lawn Light Stake-Cylinder Slot_0.2mm_PETG_MK3S_1h23m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.23 excluding VAT (range midpoint).
- Weight reported by the author
- 13 g
- Print time reported by the author
- 1.38 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
These stakes 18mm diameter cylinder for the light pipe to fit onto.
- Rating
- 0 / 5
- Likes
- 29
- Downloads
- 128
- Makes
- 0
- Views
- 588
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This stake has a 18mm diameter cylinder to allow outdoor lighting to fit over the top. There is a slot in the cylinder where a low power wire can pass through.
This model was printed using supports from build plate only. The notch should be pointed straight up, away from the plate. To help with strength, the spike is built with the long slide on the plate.
A FreeCAD and STEP model are included along with STL, 3MF, gcode files.