Liczymy pasujące modele…
This saddle t-square allows you to run lines parallel with an edge or perpendicular to it. It wraps around corners so you continue a line down an edge. The diamond shaped wholes keep your pencil centered to the line you're marking and…
Testing. Gopro mount for saddle rail. 7mm round and 7x9mm oval rail. I modeled this to mount CO2 cartridge under the saddle. 1x M3 OD5mm heat insert 1x M3 bolt 10~12mm 1x M5 bolt 16~18mm 1x M5 nut
Instructions as per cmh's source print. I had already been using a 75mm reference point with a less refined tool and the 80mm design by cmh works extremely well so I edited his design to suit. It seems that there is no set standard (I…
I initially attempted to mount a Monstrum Picatinny Side Saddle to the pic rail of my Benelli Nova 3, but found that it was sitting so high it was obstructing a significant portion of the view through the ghost ring sights.…
These Saddles (regular and short versions) replace the rollers in @GunplaMark 's The Ultimate Cereal Container Filament Drybox - Official Remix to work with my Auto-Rewinder for Ultimate Filament Drybox to eliminate problems with tangled…
This Metric saddle t-square allows you to run lines parallel with an edge or perpendicular to it. It wraps around corners so you continue a line down an edge. The diamond shaped wholes keep your pencil centered to the line you're marking…
Picatinny/1913 rail sidesaddle holder for 5x .45LC or .410 Shotshells. Designed for the Rossi Brawler, but should work with any rail-equipped firearm in .410 or .45LC. Print 1x of this model, and 1x “smallside” from the original. 1x M3…
Rear light mount for ERGON saddles with Topeak QuickClick system LInk fot the light: https://www.decathlon.sg/p/920-st-led-usb-front-rear-bike-light-set-elops-8576352.html
Nothing special, just a quick mount for a saddle bag if u want you can edit the file here BOM: saddle bag mount - main saddle bag mount - clamp 2x M5x20 2x M5(x9.5) treaded insert 2x M5 washer (optional)
I bought a baby/safety gate from a consignment sale for my basement stairwell and it didn't come with the mounting cups. Even if it did, I wouldn't have felt satisfied with a single screw mount to affix to a wall with an injection molded…
A mount for attaching an air tag to the bottom of your saddle. Allows you to make sure your bike hasnt moved, and in the worst case, track those thieves! Uses 4x M3 heat inserts 5mm long, and 4 16mm M3 bolts.
If your saddle bag makes it difficult to mount your Varia radar a sufficient height above your rear tire, you need this. I removed the need for supports and also included a short version. The original length left a lot of room for the…
A discrete, simple, AirTag mount for bikes - or could also be used as a deterrent or decoy! Designed to mount under the saddle on the rails - at a standard distance of 50.5mm outside and 36.5mm inside. Two M5 screws are required, as well…
A "boggart" is a historical term, predominantly used in Northern England, for an often malevolent or mischievous supernatural spirit. The Saddleworth Boggart. Standing figure. Requires quite a lot of support and I have yet to master…
I want to down size my saddle bag, but still want to keep 25g co2 cartridges. Given the saddle bag I got is hard shell with quick release, it does not come with external strap for the CO2 cartridges. Therefore, the only option for me is…
This mount enables secure attachment of a Büchel rear light to an Ergon bicycle saddle. It is screwed onto the two metal saddle rails. The holder is designed for a rail spacing of 41.9 mm (center to center). The rear light is secured via…
Used in saddle hunting or other rope climbing to protect your hand and loosen your knots when repelling
Remix of the great model from Yosuke to fit M3 inserts from CNC Kitchen. I used M3x12 stainless screws and small M3 washers. Printed in 0.15mm layer height in PLA. Probably a UV resistant filament would be better.
I lost one of the squishy shock absorbers that came with my Cloud-9 bike saddle, so I printed two replacements in 95A TPU. I used 4 top/bottom layers, 2 walls of 0.68 mm each, and 15% cubic infill, but you can adjust this for the feel you…
I designed and 3D printed replacement parts for my first ukulele: - tuner bushings (snap-fit) - bridge saddle (custom shaped) One of the original bushing was missing, and the saddle was damaged, so I recreated both parts using Fusion 360.…
Take quick and accurate measurements of your saddle position so you can "copy" the position over to a new bike. I have included 3 different widths depending on which biomechanical reference point width you wish to use (70, 75, or 80 mm).…
Single limb bow hanger for saddle hunting with a 10mm or smaller rope as a sys strap. I double the use of my lineman rope (hang free 10mm kit) for my sys hanger when saddle hunting. One less thing to carry and I do not often select trees…
Mit dieser simplen Lehre kann an Fahrradsätteln (vorzugsweise Rennrad, Gravelbike, MTB) die sogenannte "biomechanische Referenzlinie" bei 75mm Breite bestimmt werden. Bei einigen Sätteln (wie dem abgebildeten kommerziell 3D-gedruckten…
Holder for bike saddle. Just mount it to a wall or cabinet, and you can store a saddle there.
A simple one-piece tag holder that fits underneath the saddle. The design fits AirTag-like tags, I've used a Mili Litag as reference. The part sticks nicely underneath the saddle, it's slightly hidden and hopefully not easily spotted. The…
The Problem: The original mount included with this Rockbros tail light is quite bulky. It's designed to double as a seatpost mount, meaning the back part protrudes too much and interferes with the seatpost when you try to mount it neatly…
An AirTag saddle mount. Fastened with M3 nuts and hex screws. No tolerances for the nut inserts for a snug press fit, but you may need a hammer to force it in.
This is a conversion mod for the Tamiya TL-01 that allows you to use a pair of 2s or 3s saddle pack LiPo batteries and use generic cheapy brushless ESC’s (goolRC, etc) This project is still WIP!!! - I wanted to test it further before…
I love the Asssaver from 3DBen, but with a full-suspension bike and a dropper post, i trashed two of those puppies while jumping with the dropper post set down. It wobbled a little too much and one time it just snapped, the second time it…
Minecraft prase se sedlem Koukněte i na mé další modely . Pokud mě chcete podpořit, můžete zde: PayPal , BuyMeACofee , QRCode . Děkuji
Summary: There are various version of this simple shotgun shell holder / side saddle available. On the uploaded pictures (Maverick 88) I used the 12G_5pcs_25mm__straight_velcro version. As Filament I used Prusament PETG with Carbon Fibers…
These saddle rails can be used to prevent many bike saddle clamps from falling apart when there is no saddle mounted. This can be useful for storage and transport. I have provided both 7x7 and 7x9 versions of the design for alloy and…
Large riding horse for table top RPG. Back of the horse is flat enough but recommend using the saddle, use included model or choose from several rider models I have created in this collection . Designed to be printed with supports. I…
Specialized saddle swat Gopro mount For rear light or RADAR I print with PC-CF,over 1000km no problem. ->Mount print with PC-CF broken, about 3000km. Now using with eSUN ePA-CF. Not recomend ABS/ASA,broken with 250km.
The hooks for the saddle bags which mounted to the carrier on my bike broke off way to easily, so I designed some sturdier ones. Can be printed without supports when laying on the side. Works best when using washers: srew - washer -…
This mount fits one Apple Airtag under the saddle directly over the clamp. Printed with black filament the device is hardly visible. Assembly: 2x M3x16 socket head screw, 2x M3 square nut. Saddle rails: c-c 43 mm, ø 7 mm This model is…
The title says it all. In the holder, the AirTag has about 0.5mm of space all around. If you'd like a tight fit, you can wrap it in a tiny bit of paper or similar. Printing should cause not problems as the parts are huge and have no…
Use m3 x 12 mm screws and nuts to mount the trackers. The designs are for the following saddles: Ergon Large (4 screws) Selle Royal Ariel (2 screws) Edit 8.6.2026: Upload new Selle Royal Ariel version, since the last might be too snug for…
Hold for Saddle Bags with fabric loop for Fischer Rear Brake light with braking function. 1 Version with 15 degree tilt and one without. Print on side with paint on supports on the overhang of the slot. The inner part of the slot will…
It was designed to attach to the underside of a desk. There are lugs that fit the bottom screw holes of the switch. It also has hooks to clip in the cables to keep it somewhat tidy. If you have a 200x200 build plate like me then rotate it…
This is a simple saddle square sized to fit a 2x4. It allows you to mark a line around 2 sides of the piece without moving. If you want a different size, you can resize in your slicer. Category: DIY
I printed the 'GACIRON W09 Saddle Mount...', but my light is rounder. Thus i edited the stl to remove the sharp parts.
Rear reflector bike mount. Use plastic cable ties to secure it under the saddle.
I've wanted to go for a ride without bringing my bagpack with me all the time. But in case of a flat tire, I wanted to bring some CO2 cadriges with me. So I've designed this! It's a pretty snug fit, but just to be sure that they don't…
This saddle t-square allows you to run lines parallel with an edge or perpendicular to it. It wraps around corners so you continue a line down an edge. The diamond shaped wholes keep your pencil centered to the line you're marking and…
The Flexi-Trex by Benchy4Life is awesome. Now this saddle lets your Lego figures ride on their own Flexi-Trex. Print Settings Prusa Mk2 Rafts: No Supports: Yes, if printing the whole saddle at once Resolution: 0.1 Infill: 20% Notes: I…
Larger than 250mm, so this will have to be printed diagonal on the build plate.
Testing. Gopro mount for saddle rail. 7mm round and 7x9mm oval rail. I modeled this to mount CO2 cartridge under the saddle. 1x M3 OD5mm heat insert 1x M3 bolt 10~12mm 1x M5 bolt 16~18mm 1x M5 nut
Really distributes the weight of your bike well, when carrying on your shoulder. Filament: TPU Infill: 10-15 % gyroid Perimeters: 2
I printed out of PETG with prusa orange as the base. you can stick it to the printer with 2 sided tape, or use the version with a hole to run a small screw through it. Let me know what you think in the comments, and if there's other tools…
Tired of drivers who don't know how to drive properly, I found it necessary to record my bike rides, but screwing and unscrewing the camera to the aluminum mount I bought takes a lot of time, and adding a quick release adapter makes for a…
Simple bike saddle post lamp mount. Mounted using a ziptie, assumes that lamp has a belt clip that can be used.
print upright with support on build plate only, I would suggest 20% infill and PETG. The Led rear light is found as an addition to many front lights being sold on Amazon at the moment. I designed a front mount for the main light and wasnt…
This 3D-printable saddlebag mounting system is designed to securely mount medium-sized saddlebags beneath the front rack of an Omnium Cargo V3. The system consists of four main parts: a bottom bracket for snapping in the back of the bag,…
Instructions as per cmh's source print. I had already been using a 75mm reference point with a less refined tool and the 80mm design by cmh works extremely well so I edited his design to suit. It seems that there is no set standard (I…
My rear rack didn't have enough bars to keep my saddle bags away from the spokes on my rear wheel. I designed this to hang from the rear rack and just zip tied it to the rack at the bottom. The cross bars can be any 5/16"(8mm) round:…
Put together your own little western train The Sattle Tank locomotives are pure workhorses that help to create space or move wagons over short distances. There are also 2 wagons that transport either timber or livestock, which can be used…
Replacement tie bar for an Ukulele. 42mm distance between outer string holes. Includes two saddles, one 8 mm one 6.5 mm height. Print in ABS for strength, use brim and 4 perimeters on saddle Category: Music
This is a 34mm Capsule Saddle. A capsule saddle, base, and mount designed by Duffy P. Weber at hula cow studios. He recommends to print on side for strength. ive uploaded this to make it easy to find.
I need to take a saddlebag with me on long rides with spare tubes etc., so the seatpost mounts are no good for the radar. I created this mount for my saddle bag (Topeak) to allow me to swap between bikes with the removable clip, or…
Uses an M4 insert and 6mm M4 bolt. You need to print the holder horizontally with supports for strength. The lid can be printed flat without supports.
Velcro saddle for 3/4 in. hook and loop velcro wrap. Offset for screw head is for #6 screw type. Can be used with double side adhesive on the back.
Designed for use with Selle Italia SLR Boost TM Superflow (Small) specifically. The design utilises a slip in joint for the original Trek/Bontrager RT mount that comes with the light. There is also a provision to use an M5 Bolt for…
I created this model to allow me to mount the Rockbros Q5 tail light under my Pro stealth saddle. The saddle has two integrated mounting bolts that allow you to attach various saddle bags and bottle holders. There are two mounting angle…
This should be printed with 100 percent infill, completely solid, or nearly so. It is 91mm in diameter and 12.7mm thick, with a .4" wide slot for the pinch weld on many cars.
A dovetail saddle for the celestron 130EQ holding rings, used for piggyback astrophotography, finderscopes and other things with vixien dovetails. It is attached to them by two camera screws after unscrewing the original screw from the…
Full Model to come. At this stage just the test pieces to verify rail dimensions
UPDATE: I uploaded Rev4b. Makes it easier to secure the 2555B capsule. I made this saddle to fit the JLI-2555BXZ3-GP capsule on a BM-800 style microphone body. The body I used for this build is a Mackie EM-91C which essentially is a nicer…
These are TPU elastic upstand saddles for (lewmar) 30mm synchro blocks on U bolts.
These are TPU elastic upstand saddles for (lewmar) 60mm synchro spinnaker blocks on U bolts. The place the blocks to 30 degrees from and 15 degrees outboard. Left and right version. You need to cut the cones that act as supports with a…
Three segmented saddle for 34mm capsules. The center section should be printed using TPU. Use a 3mm heated insert in the base. Stack the segments and secure with a M3 screw.
For this build, you will need to print 5 main parts and 4 MFT Nuts. Parts: 3 Vertical arms (2 get assembled to make one long) 1 Arm / Brace 1 Base Plate interlocking part 8x M4 Inserts 8x M4 Bolts 10mm long 4x M5 Nuts and Bolts for MFT…
5" Tap to 4" Stem Saddle Boot Tap for Dust Collection System. Mounts on 5" spiral round pipe and stems to a 4" dust collection tubing.
Hose saddles for irrigation tubing. 3 model sizes: 13, 19, 25 mm (hose tube internal diameter (ID)). ID of saddles are larger than this to fit snuggly over the OD of the hose (see below table). Designed with a 3 mm hole on top to put a…
Mount your saddle square to your wall. PLA or PETG if you prefer. I printed it with 3 wall loops and 15% infill and it works great.
Print in PETG or stronger (ASA, Polycarbonate). Use 4 zipties to attach the holder to your saddle rails (the upper ones through the cutouts in the support rib, and the lower ones around the rail attachment and through the triangle so it…
Some Fizik saddles have a clip in system. This mini-mudguard clips into this receptor. As a mudguard this is of course not 100%, but it protects your behind from getting splashed with dirt. It has a small shield to protect the gap between…
A mount for the Chipolo tracker to be mounted under the saddle. The models should be split before printing to allow for mounting. You will need: - 3xM3 screws - 3xM3 locking nuts
Hello, Welcome to my profile, full of models and miniatures :-) I have a Saddled Llama for you for diorama, or just for play. Very nice figures. It is suitable for coloring. My children absolutely love it :-). Important: If the figure…
There is a seam inserted into the model. Split the model to parts in your slicer before printing. For installation you will need a M5x30 screw with a round head and a hex socket As specified in DIN 912 Print with something durable (PETG,…
This is a similar concept to @repe 's Airtag holder , but designed for Chipolo One finders. I've attached two lid files, one for bicycle saddles with round steel rails and one for saddles with tall carbon rails. Both are held in place by…
I changed the clipsize that it's fit in a sattlebag with a 20mm ropeholder / loop. Original is created by @TominMN_19289
Tried to find an integrated AirTag holder for my Garmin but couldn't find anything. I remixed Efflon's Varia mount with an AirTag holder that uses a screw lid to hold it in.
Replaces the drive side pedal to allow precise measurement of saddle height from the centerline of the pedal spindle. Note! This model is larger than the one in the photos. After printing that prototype I realized it was too small to be…
Pipe clamp to fix pipes to walls. :) Main parameter is pipe_d. screw_xxx parameters determing what type of screw you use. Currently set as a 8 gauge wood screw. (You can change it to a pan head by setting screw_trans to 0) support_d…
A 12 Gauge Shell Holder/Saddle for two shells. Remixed from the original 5 shell holder. Recommend printing in ABS or PETG, PLA will just crack or melt. I'm not even sure PETG is good. The prints in the photos were made with Bambu Lab…
A 12 Gauge Shell Holder/Saddle for four shells. Remixed from the original 5 shell holder. Recommend printing in ABS or PETG, PLA will just crack or melt. I'm not even sure PETG is good. The prints in the photos were made with Bambu Lab…
a lightweight mount for the emt tool for the light mount on specialized saddles Print without support
V3: Improved clip, now has a better hold - also shortened lock lever V2: I lengthened the bracket to fit around my saddle bag, and I adjusted the clip that retains the brake slightly to give a little more space for the light and improve…
I used an Antares Versus evo R5 saddle for about a year, but the saddle cushions eventually started to break. So I wanted to combine the saddle frame with new 3D printed pads. Printing You will need 5-10 bottom layers. Set perimeters and…
Mount for Garmin Varia, printed in ASA or PETG. Has screw hole for the round mount that is included from garmin. The gopro fingers aren't perfect need sometimes shims or filed down (some tolerance between mounts), can always be improved…
Minimal and sturdy saddle bag mount for Garmin Varia (or other accessories using the same mount). Use the back piece as a template to drill two holes in the back of the saddle bag. Then use m3x14 screws to assemble both pieces and the…
