1 / 4
Bike - Ergon Under-Saddle AirTag Holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Apple AirTag holder that fits on Ergon bike saddles.
- Ocena
- 5 / 5
- Polubienia
- 42
- Pobrania
- 185
- Wydruki
- 1
- Wyświetlenia
- 2715
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 1) (Komentarze: 2)Remiksy (0)Kolekcje (55)Powiązane
Apple AirTag mount specifically for the Ergon QuickClick supported saddle.
Saddles
Ergon saddles with Topeak's QuickClick mount. Locate a threaded hole under the saddle to confirm.
Installation
Do NOT over tighten bolt and risk cracking mount.
Requires
- (x1) M5 0.8x12mm
- NOTE: this longer screw has been included with Ergon saddles QuickClick mount in the past
- (x2) M3 coarse threaded hex nut (McMaster link)
- (x2) M3 x 0.5 mm Thread, 12 mm Long (McMaster link)
- NOTE: current design is for countersunk phillips to avoid unpopular allen key size
- (Optional) Threadlock
Recommended Print Settings
- PETG 50-100% infill
- Print with flat surfaces on bed
- NO supports