Liczymy pasujące modele…
Mountainbiker, deren Bike mit versenkbarer Sattelstütze ausgerüstet ist, kennen das Problem, wohin mit dem Rücklicht? Viele Rücklichter sind dafür ausgelegt, am Sattelrohr befestigt zu werden, das schränkt natürlich die Handhabung der…
Wydruk około 0,22 €–0,26 € nettoWstępna wycena jednego wariantu
The shift cable of my Marin Alpine Trail was touching the chainring. I designed this part and it holds the cable perfectly in place. I printed it without support by placing it on the side. Customizable with my configurator:…
Wydruk około 0,19 €–0,23 € nettoWstępna wycena jednego wariantu
Print it with a slightly flexible material, I used Extrudr ASA. Use a layer height of 0.3 mm. This will make the print three layers thick and sufficiently flexible for mounting. I have it mounted with the long side down, because I use an…
Modelled after the Canyon GP0257-01 Cable Clips. Print them standing up for optimal strength. 2 versions Brake line 5 mm - shift 4 mm (95% of bikes) Brake line 6 mm - shift 4 mm (Older bikes)
A nice pendant, or as a gift, for example. Ein schöner Anhänger, oder zum Beispiel als Geschenk.
This is a model based on the Rocky Mountain Slayer. I cleaned the design to be a easier print on my Mono 2k. Additional support on the tires, seat and handlebar is high recommended! As you can see, my front tire was not printed perfectly.…
The model is asymetric, so the two slots are of different Diameters (smaller one for the Shifter/Seatpost cable, bigger one for the brake hose. I printed them in PETG. Choose layer height depending on your desired smoothness. 0.15-0.3…
You should print it with PETG, no supports needed. The clip needs some flexibile material otherwise it breaks. If the lamp should move while driving, you can add a rubber band and clip the lamp to avoid changing angle.
Wheel guard for Mountainbike / E-Mountainbike
This is the NEW Version of the forkmount I have remixed some days ago. Now you have the possiblity to change the inserts when having your Enduro (15mm axle) or ýour downhill bike with (20mm axle) update: added adapters with a small hole,…
I added a rear fender on my trek slash 8 gen 5. After that i started to get rock chips on the pivot. So i made this simple protector in tpu. I used double sided tape to fix it in place but you can use zip ties. It will fit other bikes to.…
A lightweight organizer to neatly arrange my mountainbike grips on the shelf because i was tired of them loosely flying about in my workshop. The base is thin and bends when picked up with grips attached, but since this is only for…
you are looking at the old version , which was good but the new one has some upgrades you will possible love (hmm, or lets say its more practical :-)) Remixed the perfect Boost Mount for MTB front axle from @Animalector_245418 and made…
shifter handle for fanatec clubsport shifter V1.5. can be used with atleast SB3 big one handles. fits 22.5mm inner diameter handles. print 2 plugs to keep it in place.
a simple mountainbike wallmount consisting of two shelves and a center anchor point. The anchor point uses a 16mm rope that loops around the toptube of the frame and hooks back at the center anchorpoint. shelves are optimized for 29"…
Nice rear frame/axle mount for your bike, incl. a chain holder - think its self explaining. update 1: you are now able to use it frontside2front or backside2front - both sides have the M4 insert drills for the chainholder. update 2: made…
This is a fidlock compatible bike base that fits for a Jaison Leogang 20" kids mountainbike. The original fidlock twist bike base sits too high, so the 450ml bottle doesn't fit into the frame. With this version, it fits just about. I'd…
Edit 19.09.25: I installed a new stem, the e*thirteen Plus 35 Stem, with a length of 40 mm. Accordingly, I adjusted the mount to a height of 6 mm. I also reduced the radius of the hook and made it a little longer, so the fidlock closure…
For maximum stability, I recommend printing the holder at an angle, as shown in the first picture and at least 25% infill.
Als Material empfehle ich PETG oder ABS. Ich habe es mit 0.2 mm ohne Support gedruckt. Fügt eine Druckpause (mud_protection_part2.stl) bei 7 mm Schichthöhe ein um M3 Vierkantmuttern reinzustecken. Die M3-Schrauben können 12 - 26 mm lang…
🚵🏔 WallArt – Mountain MountainBike Bring the thrill of mountain biking and the beauty of the mountains directly to your walls with Mountain MountainBike! This dynamic WallArt combines the adventurous world of mountain biking with…
I would recommend to print this in PETG and with 100% infill or a 20 wall line count. The print in the pictures is printed with a 20 wall line count in transparent bambulab PETG.
This end cap is a replacement for the magnetic end cap that comes mounted to the Giant Clutch Crank tool. My end cap contains a Ø 27 x Ø 21 x 3 mm Neodym magnet that I inserted during a planned pause during my print. For the pause I used…
This model is a layered wall art design featuring a female mountain biker riding through a stylized outdoor scene with mountains, trees, and rough terrain. The design combines a clean base plate with a raised silhouette layer, creating a…
Halterung für die Rovativ Gabeltaschenhalterung (https://www.amazon.de/Rovativ%C2%AE-Bikepacking-Gabeltasche-Halterung-Wasserdicht/dp/B0BC4FN1XQ) um diese auch an Fahrrädern mit Gabelfederung verdrehsicher zu befestigen. Ausgetestet an…
Da bei meinem Moutainbike über die Jahre die Gummibänder für das vordere SKS Shockblade Schutzblech spröde wurde und ich keine Ersatzbänder im Netz finden konnten, habe ich diese selbst neu designed. Zum Drucken mit TPU, 15% Infill…
I can guess it will fit bigger bikes and guards. But I've only tried it on a 20" kid bike :P Recommended printing settings: First layer height: 0.2 Layer height: 0.1 Supports: Probably some, I supported underside a bit with tree supports…
Edit 19.09.25: I installed a new stem, the e*thirteen Plus 35 Stem, with a length of 40 mm. Accordingly, I adjusted the mount to a height of 6 mm. I also reduced the radius of the hook and made it a little longer, so the fidlock closure…
🖼 Modern Wall Art – Dein 3D-Highlight für die Wand! 🎨 Verwandle deine Wände in echte Hingucker! Diese stilvolle 3D-Wall Art kombiniert modernes Design mit der Magie des 3D-Drucks ✨ Ob Wohnzimmer, Büro, Schlafzimmer oder Flur – dieses…
