Mountainbike fork mount 20mm/15mm thru axle (110mm Boost) NEW VERSION
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
new fork mount for your truck, car, trailer or cargo area, made it even stronger and added interchangeable inserts 15/20
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 60
- Wydruki
- 0
- Wyświetlenia
- 301
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
This is the NEW Version of the forkmount I have remixed some days ago. Now you have the possiblity to change the inserts when having your Enduro (15mm axle) or ýour downhill bike with (20mm axle)
update: added adapters with a small hole, so you get it easier disassembled. just give a small Knock with a screwdriver or taper punch.
The BOM stays the same:
M8 screws incl. big or small washers (depend on which drillholes you use)
1x axle (15mm or 20mm)
1x fu**ing great bike
1x travel plan
1x truck, car, trailer or cargo area
Assembling needs a little bit of sanding depending on your choosen filament, if you want to keep them in the mount dont sand to much, if you want them flying around in the car on the working days - sand much more :-)
Print settings:
- minimum 6 walls, infill gyroid minimum 40% (ASA/ABS/PC/PCTG)
- in the screw area you could use some modifier to get more infill in the sensible zones
- i have used some dummy primitives (yellow) around the axle hole (1 wall/5%) and also one in the axle, its also possible a brim would be enough (have a look onto the picture) keep enough distance to the fork mount otherwise the dummies are bonded to your mount
- when using ASA or ABS dont forget to use +1% scaling in XY