Liczymy pasujące modele…
This is a custom replacement axle designed for the Tuttobimbo Italian vintage toy train.. If your original axle broke off, this 3D-printed part serves as the replacement to restore your classic toy. Features: Compatibility : Specifically…
When I tried to use the supplied axle with my PolyDryer on a roll of Sunlu ABS with a broken ring, I found the spool wasn't lifted enough to avoid the bottom rollers. About that time I saw the One-Way Check Valve video from @clough42 and…
This is the transaxle required for the VW Engine model. The transaxle includes the transmission and axle differential.
Axial SCX6 axle stands; separated by front and rear (since they're different). My goal was to have the strength to hold up a ~28 lbs truck, but use as little filament as possible. You'll need to complete, two rear verticals (they're…
This truck/bogey set can be printed out in multiple materials, snapped together without hardware or glue, and can use generic plastic or metal wheel & axle sets. The tongue on the crossframe has the tower with a hole through it to mount…
this is the piece I made to replace the stock wheels on the 1:24 scale back to the future delorean from Jada toys with g scale train wheels, it allows you to put on a different / narrower axle. here is a video that shows the alterations…
Simple adapter block to drop the childrens' bike rear-axle 5 cm, so younger children can start using the bike. Printed in PETG, with some extra perimeters and infill easily strong enough. Model contains M8 screw thread.
I moved this out of Hadley Telescope Mods to prevent it to become to big and confusing because of many different topics. I really love the daveley mount but I had issues with the original ALTITUDE_AXLE_SIDE_1.STL part. I couldn't connect…
This model is compatible with the lego system.
This model is compatible with the lego system.
If you experience issues with oil seeping through the spindle seals on your John Deere 110TLB, the issue may be pressure building as the oil warms up. This is especially problematic during winter when the tractor operates in freezing…
Lego Technic 4198367 Axle Connector Double Flexible TPU replacement
After dropping my axle one too many times, I decided it was time to have a place to put them while the wheel is out. They can be clipped in easily with one hand, and the holder is secured with two small nails. Simple and effective. There…
https://youtu.be/s_dC-w5gyA0?si=XXUXzHBmlcngIpb- please do post pictures of makes and remixes i would love to see them and also please tell me if theres any modifications i should make for durability or handling. 2212 motor, 120 A esc, 9g…
Quick fix to the broken wheels on my son's Monster Jam monster trucks - slips around the remaining peg and has a lot of surface contact for the wheel to be glued back on. Works excellent. I noticed there is some variance on the diameter…
This is the protective axle plug/dust cap or whatever it's called. This is for a KNOTT axle on a Thule CE100035R, I'm sure it's the same on different Knott axles. I printed this with TPU at 100% infill.
This replaces a broken axle cap since they are no longer available. This cap is what retains the pedal leg to the crank. The bolt in the center only holds the cap in place and does not hold the leg and crank together. This was printed…
peli 1510 to 608 bearig adapter ali pu wheels.stl - for narrow PU wheels from aliexpress (0.75 wider spacer, instead pelican wheels) peli 1510 to 608 bearig adapter.stl - for regular pelican wheels
Recommended print settings: Material: PETG Layer Height: 0.15 mm or less Infill % : 50+ Supports: Yes Print Orientation: Default as modeled I may remix ed this eventually to strengthen some of the weak areas:…
UPDATE: I made a version 2 of this design with a pivoting front axle, and a few other changes. It's a lot more fun to play with. :D ----- I needed a covered wagon for an object lesson, and didn't want to decorate a shoebox, as one source…
The Version 1 of this Prairie Schooner covered wagon (without the bonnet) has a fixed front axle, which is fine for displays, but not as fun to play with. This Version 2 has a pivoting front axle attached to the tongue (with a…
after many failed prints of trying to make my original proyo axles design l've decided to make a new one that's easier and smoother to make than the original. introducing my new axle design, the 3 piece axle. the axle is made of 3 new…
(SuperFlux or HyperCore) with Big Tire (11.5"/12") to XR rail carrier blocks modified to match the style of OG XR PubHubs. Thanks to @viperbite for help with getting the cover M2 bolts placed nicely. The primary features: A clamp - aims…
3D scan of the top cover for the paddle shifter mechanism in the 599xx rim. Should be the same part in most TM rims with the older paddle shifter mechanism. The axle part of the mechanism is available on printables (and other sites) from…
Overview This is the filament spool axle for a filament holder equipped with a load cell. A brake may optionally be installed to limit coasting. Designed in FreeCAD , source files included. Designed as an extension/replacement of the…
I made the axle hole a tight fix so the 1/4-20? bolt can cut its own threads into the plastic eliminating the acorn nut. Added a second hold for a 1-1/4" wood screw to ensure it never comes loose again. I just mirrored the part in the…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
Replaces the original rear axle & wheels which are prone to rounding out under loads higher than a brushed motor. This design includes the axle, F104 Rear Wheels, and the Rear Wheel Nuts. Everything should print fine with standard…
This model is compatible with the lego system.
This model is compatible with the lego system.
Just so you know this is a press fit hole size for the lego bars. Will need to be opened if you want one that can go on and be pulled out.
This project allows you to convert standard cereal storage containers into practical filament dryboxes. The printed side mounts are screwed togheter through the container wall and support a Ø20 mm axle, allowing the filament spool to…
This model is compatible with the lego system.
This model is compatible with the lego system.
To make the 4020 1/64 scale, start by scaling it down to %12.5 (in mm) Here's a link to the 4020: 4020 Tractor
This model is compatible with the lego system.
I have a (very) high milage vehicle that I keep limping along. When I saw that a replacement for an already cheap plastic cap was $15-$30, I said lemme just knock one out. So I popped another off, measured it and voila, this object is…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
Recommended print settings: Material: PETG Layer Height: 0.15 mm or less Infill % : 50+ Supports: Yes Print Orientation: Default as modeled Full disclosure - I have not printed this part, nor do I have a DS2000 to try it on. I designed…
Updated rear disc with spikes for mounting to the axle. (For modification with N30 engine)
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
Upgraded axle and wheel set with a stronger, more precise joint between the axle and the wheel. This remix solves the problem of wheels wobbling, slipping, or wearing out the connection over time
!! This is only an axle part. because I remixed two projects that have incompatible licenses I can't publish them in one model. Get the drum here To make your drybox convertible to use 2kg spools take a look at my other model: Here you…
This model is compatible with the lego system.
Front axle for Bruder Land Rover Defender This is a drop in Replacement. A little more sturdy than "Stock"
I own an old truing stand, which supports Quick Release Wheels only. Therefore I developed some "dummy thru axles" which can be used as a adapter for this truing stand. The dummy axles have a handle at one side for a easier…
A combination of the spool axles and nuts from the original model by @MiklosKiszely_486882 with the universal centering cones from STORM DESIGN (@Damian27) . This saves a couple of parts, avoids centering discs for different spools and…
Balloon racer with simplified air ducts and axles + exhaust mouthpiece added for easy inflation with balloon attached.
This axle cap is modeled off the right side axle cap, with clearance for the centerlock rotor mount. The fit is snug to the bearings, and shouldn't have any drag on the rotor mount. Printed in PETG, 0.2mm Layer Height w/ 6 perimeters.…
The original shaft had a tendency to slide off the side supports during use, so I extended it by 2–3 mm and added holes sized for an R-clamp to keep it securely in place. Printed successfully in both PLA and PETG without issues. For…
Overview A while back, the scroll wheel of my G703 failed - it spun freely but no scrolling would register. Opening up the mouse to take a look revealed that the left-side axle of the wheel, which sits inside of and spins the rotary…
This is a two-part (wheel & axle) assembly replacement kit for common vacuum cleaner wheels (fits my cleanview) that have failed or snapped. The design has been reinforced to handle stress and weight of the vacuum better than the thin…
My kids (and grandkids!) still pull out the old playmobil sets once in a while. We were missing several of the tiny wheel locks (wheel lock hub, hub ring, axle clip), so I quickly made a SCAD model that fit on our toys.
this is for doing a brake job on a Toyota forklift without making a big mess. After pulling the axle shafts you install this plug to keep the diff oil from draining out.
——————————————— Deutsch ——————————————— Einschraubbarer Trichter für Ölwechsel Diesen Trichter habe ich selbst konstruiert, um den Ölwechsel an den Achsen meines Kramer 312LE deutlich zu erleichtern. Bisher musste ein normaler Trichter…
Renault Megane 2's glove box is held by two plastic axles at its bottom. This replacement works fine on my car. Be aware that you should print it in ABS or PETG given summer temperature within cars. Also you should print it horizontally…
provides clearance for extra or thicker cables for various mods.
This model is compatible with the lego system.
This model is compatible with the lego system.
A clip that locks the spool axle in place. Especially usefull with the manual cranking handle. Link to Damians Remix file to which it fits: https://www.printables.com/model/478890-bambu-lab-filament-spool-winder-upgraded
Replacement of Playmobil carriage rear axle. Foto shows broken in front, printed (with one wheel already on) in back + mounted. Printed mine with 0.1mm layers because of small springs on the ends. Also a tiny bit of support is needed to…
Upgraded Top Rack Assembly uses screws to hold the wheels in place. Over time, the plastic axle deteriorates due to heat and chemicals. This model will allow you to print your own replacements (you won't need to buy the full replacement…
You will need six 18x12x4mm bearings, M3x12 screws, M3 nuts and two M4x16 screws and two M4 Nuts. I recommend to use 8mm aluminium hex rod to make the axle, instead of the printed hex rod. The rims get screwed together by tiny 2x10mm wood…
Don't use a brim. It will prevent the axle from fitting easily through the bearing in the auto-rewinder. There is not a ton holding the print to the bed but I haven't had any problems with the part popping off during printing on the Prusa…
Here are some accessories for the Triple Gear by henryseg: End stops for the Triple Gear axle . They can also be used as a stand. Base with Handle for Triple Gear, to actuate the gears in different ways. Printing / Assembly tips This…
I made this to drive the front axle seal in when I was replacing them on my 07 Hummer H3.
This is a axle holder I used on the electric car I build for my kids. You can read more about this project here: https://www.martinsentech.no/index.php/2023/10/12/electric-pedal-car-for-kids/
Print with ~ 30% or more infill, 3 or more walls. Design intent is to have seal seat flush or seat 2mm out if flush causes the axle to leak. Should seat square and even.
The axle hole is sized at 15.4mm. That was just right with PETG-CF, but you may need hole compensation to match your filament and preference. My old 15x100 axle mount had an OD of ~20.75mm, so this is sized to press fit over that…
It is a derviative of another casette lock. I could not find the link to the original owner but the 12 tooth is credit to the original creator. This one slips over a 19.6mm thru axle. Requires a socket for strength and an external wrench…
I made a 3d printable Version of the Thule Chariot Axle spacer. Like the original metal version you can buy from thule, it gives 10mm extra clearance between the frame and the mounting bracket. I used carbon fiber reinforced filament but…
This model is compatible with the lego system.
new front axle with 20° caster to improve steering for my 3d printed 1/24 Rc crawler #MRC24
Bought my Jetblack Volt trainer second hand and the thruaxle adapter was missing. Measured the distances manually and added tolerances so that it worked on my printer (Snapmaker J1S), the measurements seem to be: Inner diameter: 12mm…
This is a replacement for COBI-88504 that is designed a little bit sturdier as the original. The original was broken by my son after a couple of days whereas this holds ever since. Recommened Layer height is as small as your printer can…
I created a version of AZIMUTH_AXLE_BOTTOM.STL for the Daveley Mount with 6 instead of 3 holes (for M5 inserts), so that it is easier to use different adapters for mounting on tripods without having to unscrew the whole mount every time.…
This is a custom replacement axle designed for the Tuttobimbo Italian vintage toy train.. If your original axle broke off, this 3D-printed part serves as the replacement to restore your classic toy. Features: Compatibility : Specifically…
When I tried to use the supplied axle with my PolyDryer on a roll of Sunlu ABS with a broken ring, I found the spool wasn't lifted enough to avoid the bottom rollers. About that time I saw the One-Way Check Valve video from @clough42 and…
Modifications to 3DSets Landy Wagon (and other 3DSets models) to go to metal transmission from gearbox to wheel, using Thumper axles Use in combination with Gearbox with 3D Printed pulley and Metal output GT2/Metal pulleys gearbox UPDATE…
You will need (4) 3mm flat head screws 20mm long to assemble stand together. I printed with 15% infill using PETG and it seems strong enough to hold SCX6.
The Part was printed with Overture TPU - I think PLA Flex is even better.
![Jumbo Integrated Rewinder for 2kg Spools for (un)original Drybox [Axle Only]](https://media.printables.com/media/prints/9b94fa80-08b5-423e-ad2c-89cdd3e5c2c8/images/12163571_8aa253c3-eb78-4b9f-acf9-2fb2e49b2fdf_5eed7645-cee6-44da-a4d4-c8d4e8799df2/img_1127.webp)
