Magnetic End Cap for Giant Clutch Crank Tool (Mountainbike Mini Tool)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I lost the end cap of my Giant Clutch Crank tool, so I made this replacement. With the magnet inside it works perfectly.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 337
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
This end cap is a replacement for the magnetic end cap that comes mounted to the Giant Clutch Crank tool. My end cap contains a Ø 27 x Ø 21 x 3 mm Neodym magnet that I inserted during a planned pause during my print. For the pause I used the last layer of the hollow ring shaped cavity. I then glued (UHU Endfest 2K epoxy glue) the end cap onto the shaft. I used Extrudr Greentec Pro filament, but I guess anything that resists UV radiation (ABS/ASA/PETG) should be fine.
The tool can now be used as usual, at least with my alloy SRAM DUB cranks.
