Magnetic End Cap for Giant Clutch Crank Tool (Mountainbike Mini Tool)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I lost the end cap of my Giant Clutch Crank tool, so I made this replacement. With the magnet inside it works perfectly.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 11
- Makes
- 0
- Views
- 338
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
This end cap is a replacement for the magnetic end cap that comes mounted to the Giant Clutch Crank tool. My end cap contains a Ø 27 x Ø 21 x 3 mm Neodym magnet that I inserted during a planned pause during my print. For the pause I used the last layer of the hollow ring shaped cavity. I then glued (UHU Endfest 2K epoxy glue) the end cap onto the shaft. I used Extrudr Greentec Pro filament, but I guess anything that resists UV radiation (ABS/ASA/PETG) should be fine.
The tool can now be used as usual, at least with my alloy SRAM DUB cranks.
