Parametric Pipe Saddle Clamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Used for hanging piping from rafters, joists, walls, etc. I needed this for hanging a section of PVC pipe from a…
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 307
- Wydruki
- 0
- Wyświetlenia
- 1368
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Used for hanging piping from rafters, joists, walls, etc.
I needed this for hanging a section of PVC pipe from a ceiling joist to hang my filament spools. Worked like a charm.
Instructions
This Thing is fully parametric. Download the SCAD file and edit in OpenSCAD. You can adjust the saddle clamp by changing:
- Pipe diameter
- Strap width
- Length of the saddle clamp tabs
- Strap thickness
- Diameter of the screw hole
Make your changes, hit F6, export your STL, and print.
NOTE: The STL part uploaded here is for 22.3mm PVC pipe (7/8" diameter), 20mm strap width, 20mm strap tabs, 1.5mm strap thickness, and 4mm screw holes. I printed this part with 0 shells, 50% infill, 0.35mm layer thickness and it came out strong, yet flexible, on my Makerbot Cupcake.
Category: Parts