Airtag bicycle hidden saddle holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Airtag holder for your bicycle that is hidden and securely attached under your saddle
- Ocena
- 5 / 5
- Polubienia
- 194
- Pobrania
- 875
- Wydruki
- 1
- Wyświetlenia
- 9006
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hidden Airtag Saddle Holder
This is a handy holder that keeps your airtag hidden and safely attached to your bicycle.
This is not a clip-on to make it harder to remove, instead the two halves are held together with four screws.
The bottom part clips onto the saddle bars and the screws then lock it in place and prevent easy removals.
I remixed this because the original one did not fit onto my saddle and I didn't like the clip-on approach. For this one, your bars need to be 40mm apart at one point and each bar extends outward at an 9° angle.
Please leave a comment if you want other distances/angles and I can upload them too.
Part-List:
- 4x m2x12 (or longer)
- 4x m2 nuts (nyloc nuts also work)