Liczymy pasujące modele…
Small Post-It box with a place to put Your STABILO fineliner. Scale as You need it and have fun Printing :)
Wydruk około 3,32 €–4,06 € nettoWstępna wycena jednego wariantu
Should work with cars similar to: LGB 94062, LGB 94069, LGB 94159, LGB 94169, LGB 94369, LGB 94259, LGB 94669, LGB 94769, LGB 94869, Platte wagon uit set 90432, etc.
Wydruk około 0,26 €–0,32 € nettoWstępna wycena jednego wariantu
I printed this on my Prusa Mini+ in PETG with no supports, 0.2mm layer height, and 100% infill. This is a remake of AlexT's Post-It Holder .
Wydruk około 1,12 €–1,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a simple Post-It Notes Tray for 3" by 3" post-it notes. I created it to organize my own “to-do” notes, but it can also be used to hold stacks of unused post-it notes! It's made with Prusament Galaxy Black PLA - though any type of…
Wydruk około 1,51 €–1,84 € nettoWstępna wycena jednego wariantu
Um simples e belo porta post-it para sua mesa de escritório. Modelo super elegante e um tanto quanto luxuoso dependendo do material e cor utilizado para impressão. Super simples e fácil de imprimir para qualquer um poder ter o prazer de…
Wydruk około 0,61 €–0,74 € nettoWstępna wycena jednego wariantu
RC car post height-59mm
Wydruk około 0,41 €–0,50 € nettoWstępna wycena jednego wariantu
Prepared for print
Wydruk około 7,84 €–9,58 € nettoWstępna wycena jednego wariantu
These are posts designed to hold up a cat hammock. I didn't want to spend the money on a commercial solution when I have a thing maker in my home, and I wasn't satisfied with the solution(s) currently on Printables. Therefore, I designed…
Wydruk około 13,05 €–15,95 € nettoWstępna wycena jednego wariantu
if you dont want prusa logo theres an stl without it
Wydruk około 2,03 €–2,48 € nettoWstępna wycena jednego wariantu
This is a fence post coupling i created to attach an electrical box and a security camera. Print instructions I added the fusion file so you can change the width if you are using the design for a fencepost with a different thickness.
Wydruk około 1,09 €–1,33 € nettoWstępna wycena jednego wariantu
max magnet (w x h): 19.5mm x 70mm max card thickness: 0.8mm
Wydruk około 0,64 €–0,79 € nettoWstępna wycena jednego wariantu
A simple holder for your postcards if you want them to stand up right. His bend shape gives the postcard a stable stand, but without buckling.
Wydruk około 0,40 €–0,49 € nettoWstępna wycena jednego wariantu
K balanční hře je nutné vytisknout větší počet postav.
Wydruk około 0,25 €–0,30 € nettoWstępna wycena jednego wariantu
"Betonový"patník ideální pro měřítko H0/ "Concrete" bollard ideal for H0 scale
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
TVS Apache RTR 310 – 3-Color Multicolor Poster 🏍 A flat, multicolor 3D-printed poster inspired by the TVS Apache RTR 310 , featuring a black base with red and white details. Made for Apache enthusiasts, this slim decorative print is…
Wydruk około 1,75 €–2,13 € nettoWstępna wycena jednego wariantu
UPDATE : I have now added a version of the model with no magnet holes in the base. This will save you circa 15 minutes of print time a couple of grams of filament. If you don't need magnet holes (As I expect most dont), then the…
Want to elevate your photo's of your recent projects? This simple seamless background support is to be used with your normal poster board that you find at your local dollar store or walmarts of the world to create a clean and simple…
At the moment the LEGO flower post cap is availabel for posts with a diameter of 27.5, 34.5, 42.5, 48.5 and 60.5 mm. But if none of them fits your post it is very simple to scale it. Instructions are below. Check out my other postcap…
Currently the following sizes are available (notes size / max. block height): 90x90 mm / 95 mm 90x90 mm / 45 mm 85x85 mm / 45 mm 83x83 mm / 80 mm 83x83 mm / 45 mm Contact me in the comments section if you need a different size. Printing…
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
There are other Post=it note stencils out there for “To Do” lists. However, these other stencils have nine (9) lines, which are too small for my writing. So, I created this stencil/template with only seven (7) lines. This leading is…
I designed a small 10x10cm building-complex for a diorama I saw on youtube (link down below). It is based on one of the models of the guys in the video. You can see some pictures of the nearly finished diorama in the gallery. Only thing…
I needed something that holds more sticky notes than some of the other models I found. It will fit your standard 3 inch sticky notes. I made the sticky note holder, but the container hook is CSD_Salzburg's design from Thingiverse,…
A deep narrow container for the Skadis peg system. Designed to store 50x75mm post-its. No supports required Requires the Universal Hook by CSD_Salzburg: https://www.thingiverse.com/thing:2853257 Sculpt by @Mattburt77
I've created a stencil designed for post-it notes, featuring two versions: one with squares and another with circles. In response to a friend's request, I've also included a version of the square stencil without edges/borders. If you…
The design consists of 3 parts : BASE – the main holder that clips into the Skadis pegboard (requires minimal supports) INSERT 1 – slides into the BASE to securely hold the Post-it notes (76x76mm) in place INSERT 2 – slides into the BASE…
Desk organizer, 7 versions. Version shown in photos has date wheel holder in back with cutouts in bottom to save a little material. One version omits cutouts and one version omits date wheel holder. Added versions to accommodate a 6x9…
If all designs are printed at once, the print will take ~6.5 hours. No Supports are needed. Fits on a ring for easy storage. Works best with fine-point pens/pencils.
Simple desk organizer with a drawer and removable container for post-it sized (76x76mm) notes. Made by my friend who doesn't have an account or printer (yet) but wanted to compete. The base requires a bit of support where the drawer…
Post-IT note holder that also holds SD Cards and USB Drives. The back can also hold pens. Simplistic design. Included STEP file for your own remix. Category: 3D Printing
A 2x2x8 gridfinity post it holder. It can hold 5 stacks of standard post it notes (76x76 mm or 3x3 inches).
Background The PLAb System We all love our friends at ThorLabs, but sometimes you just need a quick part and you don't have the cash or time to wait for one to arrive with your order of Lab Snacks. The solution, 3D printable…
I created this model to mount my cam pan v3 to watch over my backyard from the corner post of my deck. You can use this model anywhere you have an outside corner that is 90 or print with TPU or PETG and bend it, if its an abnormal corner.…
It's always nice to jot down some notes on a sticky-note. And what do you need to write down notes? PENS (or pencils)!! Now you don't have to run around your house to find a post-it note and pen. You know where they are There are three…
Zum Skript selbst gibt es eigentlich nicht viel zu sagen, außer... es muss nichts mehr im Prusa Start GCode oder End GCode ergänzt werdenzum aufrufen des Skriptes braucht es beide Pfade (Python und Skript) z.B.…
You can display your Postcards I print ist with a 0.6mm nozzle and a 0,4 layerheigth
This quick edit allows you to use a ¼" screw to mount a camera or webcam. The hole is 10mm to give some wiggle room. for minor adjustments if needed and used a plastic washer. I printed it with 4 walls and 40% cubic infill and it's pretty…
Post IT Holder with integrated list maker hold your post IT on your desk with a userful list creator aside. Created for classic postIT's, internal dimensions, 72x72mm doesn't requires suports passed my printing test (BambuLab)
I didn't like the ones I saw so I created my own. This one has a lip so that you can easily keep it square to the notepad while stenciling.
A box for holding post-it notes. A small latch has been added to hold the box close. To open, slightly press inward on the bottom side while pulling open.
Follow me on Instagram or Twitter for weekly updates on free, high-quality designs like this. Get exclusive free designs, commercial licenses, and premium model plans on Thangs ! (affiliate link) This simple post-it holder design requires…
Since the model is free, please consider subscribing to our Youtube channel here: https://www.youtube.com/channel/UCnXgPCj_NgizXnv_ArxK2TQ 3D print your own Among Us crewmates and imposters! For the crewmates, there is a model that…
I designed this to aid people wishing to make trellises as shown by Youtube channel “Josh Sattin Farming” in this video. It's sized to fit 15mm aluminum conduit closely enough to serve as a coupling all its own, without need for the…
Wanted to experiment with the necessary strength for this kind of mechanism. First iteration proved reasonably strong printed in PLA with 4 perimeters and 20% infill (gyroid). Should all print fairly easily without supports if you put the…
Remixed the width by 104% and removed the Honeycomb mounting, the back is now smooth. I'll probably use command strips to mount to the wall.
Eigenes Design einer Skadishalterung zur Aufnahme von Post-it Notes, Grösse 78x78mm. Passend für die 2 Stück (Block's). EcoPLA, 15% Infill, 0.2mm
Edit: I finally added an SLA version, i've tried it and it's really better for the tiny details, also added a hook to get closer to the real thing. My la poste TGV from LIMA i bought second hand had all it's bellows missing, I got on a…
Back at the custom post imperial stuff No inside ears on this one so its 208mm across Not sure how this will print with that mohawk detail. Scaling a must Untested Added a braced version of the helmet to keep the front T shaper better…
Large format Post It Note holder for Gridfinity. Print Settings: Polymaker Polyterra PLA 15% infill 3 perimeters The size/style can be found here: https://www.amazon.com/gp/product/B09MWQPJZ8/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
For this Valentine's Day, bring back passing notes to your crush! I had an idea to start writing down small, daily notes/letters to my partner so that next year I could give him a trove of them to read at his leisure. After learning to…
This piece was made to fit Gravel3170's Squirrel Guard onto a post made from ½" square tubing. Some US big box stores carry shepherd's hook posts made from ½" square tubing. This should be printed from TPU. I used a zip tie to hold it in…
Pan/tilt/roll mount to attach anything with a 1/4-20 mount thread to a T-post. I use it to position and mount game cameras. Hardware required: [1] 5/16" x 2" x 3-¼" U-Bolt [4] 5/16" Hex Nuts [2] 5/16" x 2 Hex Head Bolt [2] 5/16" Washers…
75 mm. Post-it stencyl an holder.
I Love Post-it notes but hate how they never seem to stay in the same spot on my desk when they are not written on. So one day I though I could fix this and make a cool simple and clean holder. This is my own design for a simple hex…
I had a location for one of my caches, that was changed quite a bit and looking at the surroundings I came to the conclusion that a normal hide would be difficult so after a few measurements I had an idea that you see here. The pictures…
This remix was done to take advantage of the awesome T-Nut system developed by user 6d6178 .
Onshape source: https://cad.onshape.com/documents/e29c41868baf085ca6fb2c1f/w/a73bda9949966a1f79adf345/e/da24c70a6aa26bb298a34c28?renderMode=0&uiState=64cb00ac650f132919fd22f3
running out of space for you die cast cars stackable modal. 2 to 4 plus high, resize to your dims for scale. cut top post for top plate 1/18 scale 160 x 280 x 130 pictures are of this size 1/24 scale 135x 215 x 105 top plate cut at 12 mm…
This is my Post-it note stencil set, featuring ten unique shapes designed to suit a variety of tasks around the home or office. They’re great for mind mapping, flow charts, revision notes, and much more. The stencils come with a compact…
Teaser video: https://youtu.be/vJn5NvjVAy0 POCKET OUTPOST is your key to the stars. As a brave explorer, you establish outposts on moons, found colonies on foreign planets, and discover unknown resources on asteroids that need to be…
Designed to fit a single post it note with 7 divisions. The sliders lock into place with a satisfying click. Inspired by @wafflecart
I don't know if it was to cut cost, but Lima on their normal non golden tgvs didn't include isolators. Really a shame to not include such basic parts. It was bothering me, so here you go, you can print them for yourself rather than buying…
Post It Note and USB & SD Holder. for 90*90mm and 76*76mm(3").
You can stack your Postcards. I print ist with a 0.6mm nozzle and a 0,4 layerheigth
Posture Corrector Yoga Cross Stick - Muscle Release Tool - Yoga Sticks - Stretching Tool - Giunzione Barre correttore Posturale Yoga Sticks Technical Specifications: Default Stick Diameter: 21mm Customizable: Easily resize/scale the 3D…
A quick and easy stencil to help create a quadrant divided Post-It Note.
Explore the world of postcard art with the "Postcard Magic Template." Transform any paper into stunning postcards and unleash your creativity in Postcrossing. Create unique postcards using the versatile Postcard Template. It's perfect for…
Protect your Post-it Note with this cover Come with 4 variations Blank "Post-it" Heart Wave Choose what you like to print. It fits a 3x3 inches Post-it Note. Hinge in this model is remixed from…
Remix with higher pen holders so they don't tip over, and double the amount of USB holes
One of my Jerith fence post caps went missing so I designed this replacement. Fits 2" aluminum estate-style fence posts. Printed in black ABS, 50% infill w/ support.
To make it easier to workout which post is which on a Corny Keg, I have made this simple marker. Printed in PETG. Yellow for Liquid. Red for Gas.
This model for the ikea skadis uses the Skadis T-Nuts Mounting System for Ikea Skadis Pegboards. See: https://www.printables.com/model/228663-skadis-t-nuts-mounting-system-for-ikea-skadis-pegb Edit: 15.09.2025 - fixed issue where…
I designed this postcard for my girlfriend's birthday, then I created this file by making a gray rectangular base and then ‘changing color’ I made the printer draw my design in white. Printed in pla without supports, 3 layer color change.…
A simple display stand for postcards and other dead-tree-based memorabilia. The dimensions are 140 x 150 x 170 mm which is rather large. Feel free to scale according to your requirements. Keep the ratio because of the circular holes! A…
I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … I needed a solution to store the tools I need for the…
This is a sign for the average PIBKAC ('Problem is between Keyboard and Chair'), hopefully raising awareness among your colleagues, family etc. on how to not store passwords. As simple as the warning may sound, it still happens. ;-) This…
Post stand for PC speakers. cable clips can be fastened using No. 4 wood screws.
The model could be printed as one hole batch, i designed it to be glued together or not, so do as you wish. I printed it with a Brim of 2 mm for preventing warp on the sharp corners. It does not requires supports as the holes could be…
My Trelock U-Lock wasn't fitting properly to my bike. Thus, I designed my own mount, that attaches to the seat post (27.1mm in diameter). Print the bracket two times and the holder once. I've used 4 short M5 screws to screw the bracket…
Gcode-post-processing-script-for-dynamic-side-fan-speed A gcode post-processing script that allows for dynamic speed control of the side fan. Additionaly it can calculate material cost based on extrusion role (e.g. you want to charge more…
Added some support for posts. This is the closed version.
Fallout Shelter sign Wall Decoration Logo Poster. I have uploaded 2 designs, one for those that have a multi-color system (AMS, CFS, MMU...) and another with which multi-color is not necessary, the color is changed by layer number. Ready…
Support for cat scratching post tube. Stop the print at a precise layer to insert the nuts
These 3D printable seamless background supports securely hold poster boards in place, creating a smooth, professional backdrop for photography, presentations, or displays. Designed for stability, they prevent bending or falling while…
An easy and fast print to help you hang posters in the wall without nails. You will need only Blu-tack or a similar product (and a 3D printer of course :)). Una impresion rapida y sencilla para colgar posters en las paredes sin usar…
If your screw posts are broken off it can be tricky to screw your breadbin case back together. These sleeves are designed to slip over the top of the stump of the broken post and be glued in place, repairing your beloved old brown…
Simple post-it holder with a slot for a pen
This is a reminder post to put on the playing field when the Bard / Soothsinger / "Music Note" character in the boardgame Gloomhaven is playing the Muddle song. Inspiration for making this post comes from Rohirrim's "Gloomhaven - Bard…
I used Meccano set bolts as hardware and I printed it with 5 walls and 35 percent infill to make it strong. The only supports you should need are under the mount.
This is a remix of mklements Lab Rax 10" server rack - bolted version. Whenever I installed new equipment into the rack, I got annoyed of the M6 bolts always getting pushed all the way through and falling to the bottom. So I designed this…
Tool per quota Ifp su seatpost transfer fox con travel da 200mm
Please note, this doesn't have the lock mechanism (it would be pretty easy to add, just haven't done it yet cause I was too excited to get this up and running, lol). The weight of the Satellite should be plenty to keep in place for now. I…
This is a little 90x80x30mm drying rack I've designed for my postcards to dry after printing, without having them laying around through the house, making the wife happy. Can be printed on anything with anything. If you use stock that had…
I can't buy tomato stands right now, but I can buy broom handle. I needed a way to anchor them in the ground so I remixed a spike. Added the broomstick thread, and narrowed it to use less material and print faster. Holds in the ground…
Tamponi in TPU per cancellare il rumore dal portellone posteriore derivato dalle vibrazioni della cappelliera Per mesi sono impazzito a cercare l'origine di una fastidiosa vibrazione che arrivava dal posteriore, casualmente ho viaggiato…
Postcardholder Heart. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.20 Infill: 20% Category: Decor
These parts allow you to convert a 3" paper tube to a poster/document tube. The tube was the exact same length as the paper because it was the tube the paper was originally spooled on so this gives you an extra inch or so in length so…
A postcard rack designed for 148 x 105 mm cards (150 x 107 mm opening). I guess you can upscale and downscale it to accommodate for different card sizes. I included a version with a prusaslicer modifier to make your infill pattern visible…
The “A” version aligns with the center of the dividers. The “B” version aligns with the center of the grid holes (see picture). There are two versions of the cover, one that takes M3x4mm heat inserts, and one that you can screw directly…
