TVS Apache RTR 310 Multicolor Poster – 3-Color PLA Print
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Flat 3-color TVS Apache RTR 310 poster in black, red and white. Manual swaps; no multicolor unit needed.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 9
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial
TVS Apache RTR 310 – 3-Color Multicolor Poster 🏍
A flat, multicolor 3D-printed poster inspired by the TVS Apache RTR 310, featuring a black base with red and white details.
Made for Apache enthusiasts, this slim decorative print is perfect for a desk, shelf, workshop or garage.
No AMS or dedicated multicolor system required! The colour transitions are arranged by layer height, allowing you to create the three-colour finish using manual filament changes.
🖨 Print Settings
Model size: Approximately 120 × 160 × 2.4 mm
Tested printer: Anycubic Kobra 2 Neo
Slicer: OrcaSlicer 2.2.2
Nozzle: 0.4 mm
Layer height: 0.08 mm
Initial layer height: 0.20 mm
Material: PLA
Colours: Black (base), red and white
Infill: 15%
Walls: 2
Supports: Not required
Orientation: Print flat on the build plate
🎨 Colour Changes
The included project is configured for manual filament changes at these heights:
1.08 mm — Switch to red
1.32 mm — Switch to white
Follow the printer's pause prompts to change filament manually. Keep the prime tower enabled when using the supplied OrcaSlicer project.
📁 Included Files
3MF project: Model and slicer settings for OrcaSlicer.
G-code: Pre-sliced file tested on the Anycubic Kobra 2 Neo.
The included G-code is printer-specific. Check your machine and filament settings before using it on a different printer or firmware.
💡 Printing Tips
Use a clean, properly prepared build plate.
Use a consistent PLA brand and colour set for a more uniform finish.
Allow the printer to complete each pause and filament change before continuing.
The supplied G-code uses a 185°C nozzle temperature; verify that this suits your filament before printing.
🏍 Enjoy the Apache Spirit
A compact display piece for motorcycle enthusiasts and fans of the Apache RTR series.
This is an unofficial, fan-made decorative project. TVS and Apache are trademarks of their respective owners. This project is not affiliated with, sponsored by or endorsed by TVS Motor Company.