Among Us Interactive models – crewmates and imposters
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
We created interactive "Among Us" models: crewmate models that separate in half, and imposter models with knives.
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 144
- Wydruki
- 0
- Wyświetlenia
- 762
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial
Since the model is free, please consider subscribing to our Youtube channel here: https://www.youtube.com/channel/UCnXgPCj_NgizXnv_ArxK2TQ
3D print your own Among Us crewmates and imposters! For the crewmates, there is a model that separates in half to expose the bone like in the game, a solid one-piece model, and a model with hands. The model that separates in half can be printed with either spaces for 7 x 2 mm magnets to hold the pieces together, or a peg that fits into the other half to hold it together. For the imposters, there is a model with the knife down and a model with the imposter holding the knife up. For full project details and available 3D models, visit our website at makeitlabchannel.com.
I printed the Among Us figurines with the following settings:
3D Model slicer: Cura version 4.13.1
3D Printer: Ender 3 Max
Layer Height: 0.2 mm
Nozzle temperature: 200 degrees C
Bed temperature: 60 degrees C
Retraction speed: 50 mm/s
Retraction distance: 6.5 mm
walls: 3
Print speed: 50 mm/s
Infill percentage: 15%
Infill pattern: Gyroid
Support type: Cura Tree Supports
support walls: 1
Support interface pattern: Grid
Build plate adhesion: Brim (brim line count of 10)