Liczymy pasujące modele…
Based on the idea of the user Sneaks i made a measuring tool for metric screws. This tool can measure M2-M10 screws with a length of 4-120mm Printing instructions: 0,15 mm layer height no supports infill 15% rectangular infill 2…
Wydruk około 2,47 €–3,01 € nettoWstępna wycena jednego wariantu
Carabiner with lock that I created for study For greater strength, increase the number of walls. Normally I use four walls but I recommend using five or more. The use of supports is required in the parts highlighted in the image. WARNING:…
Wydruk około 3,61 €–4,41 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Please note: This is an adapted version of my Raspberry Pi 3 case ( https://www.prusaprinters.org/prints/4038-malolos-screw-less-snap-fit-raspberry-pi-3-model-b ) that I modified to fit the Raspberry Pi 4. I do not yet own the Raspberry…
Wydruk około 1,65 €–2,01 € nettoWstępna wycena jednego wariantu
Necessary commercial parts 4 stainless steel “608” bearings. These are the same as the spooler bearings that come with the Prusa MINI. 8 cap screws (M3-15 or M3-16) 8 nuts (M3) Foam rubber sheet with adhesive on one side. Recommended…
Wydruk około 1,26 €–1,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Super fun, Easy to print, Relaxing Gear Cube Fidget! This prints very easy and fast and just clicks in during assembly! How to assemble: Begin by putting all the pins into the core Put on the bigger gears on the bigger areas Put on the…
Wydruk około 3,65 €–4,46 € nettoWstępna wycena jednego wariantu
Outer Dimensions: H: 44mm R: 38mm Inner Dimenions: H: 35mm R: 30mm Print Settings: 0.08mm Layer height 3 Walls 8 Top and Bottom shell layers 45% infill Fuzzy Skin with a modifier so it doesn't affect the outer thread → Contour with 0.3…
Wydruk około 1,76 €–2,15 € nettoWstępna wycena jednego wariantu
This is to help you get that perfect first layer and determine where you need to make adjustments on your 430x430 bed. This will work with any 3D Printer. Just scale to size of your printer. The pattern was modeled after bed screws on…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
I love these little boats! This time with dual drive! Now the boat goes much further, lasts longer and, above all, it finaly goes straight ahead! The drive spiral is made of PETG this time. This works much better than PLA. All parts are…
Wydruk około 0,90 €–1,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple drill and screw guide. Helps to drill perpendicular holes and screws. Tested over with my pergola project. Works fine. Super easy to get 90 degree angle. Scale for smaller objects. This one is designed for long (30cm) drills.…
Wydruk około 1,27 €–1,55 € nettoWstępna wycena jednego wariantu
I simply got tired of not being able to clean lead screws properly on my 3D printers without taking them apart for thorough cleaning. I have designed this simple device that uses four 6x3 magnets and isopropyl alcohol-soaked kitchen…
Wydruk około 0,54 €–0,66 € nettoWstępna wycena jednego wariantu
Printing Can be printed in any material. Comes in 6 different sizes, all using the same lid. can be scaled down to 55% and still work. The premade G-Code is one lid and one medium bottom. Good Luck and Happy Printing!! Don't forget to…
Wydruk około 5,79 €–7,08 € nettoWstępna wycena jednego wariantu
Improved version of the 3D Pull Copter Finger Ring with a different rotor design. NOTE: Models not compatible with original design Features: Improved rotor design (bigger and angled differently) Somewhat longer key for easier use Uses M3…
Wydruk około 0,16 €–0,19 € nettoWstępna wycena jednego wariantu
I wanted an airtight PC4 feedthrough for my drybox, so i took some insperation from the RoboMagus solution and iterated to this solution. The cap is capable of sealing the whole feedthrough airtight, when it is not in use. I also added a…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
This is a remix of this bag clip: https://www.thingiverse.com/thing:4027950 which goes back to https://www.thingiverse.com/thing:3238736 . Modifications are: 1) The insert has two stops. One prevents it from falling into the bag and the…
Wydruk około 3,92 €–4,79 € nettoWstępna wycena jednego wariantu
3D printed palm ratchet knob (stubby screw driver handle) Print-in-place : Just print, and you are all set. Assembly work is not necessary. Durable ratchet mechanism : Tapered ratchet gear makes it not only easy to print but also sturdy…
Wydruk około 2,69 €–3,29 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Longer Version (13.04.2026): Upon request, I created a longer version that is better suited for loose soil. Despite its height, this screw can still be printed on the Prusa Mini. As with all models, no supports are required. Please note…
Wydruk około 2,23 €–2,73 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Decided to remix my remix and make the original gravity broom holder but with through-holes for screws vertically aligned to anchor into a wood wall stud (or whatever vertically aligned anchoring medium you want!) Made the countersinks…
Wydruk około 2,65 €–3,24 € nettoWstępna wycena jednego wariantu
Bit holder for hexagon screw bits New version available: Klick here Of course, there are already different bit holders here. The special thing about this one is that you only need very little filament to print it, and the printing is very…
Wydruk około 0,43 €–0,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Helps you stack two or more IKEA LACK tables on each other without screws, and with Logo Prusa. Vous permettez de superposer des table Ikea (Lack) sans vises, et avec le logo de Prusa ;).
Wydruk około 16,13 €–19,72 € nettoWstępna wycena jednego wariantu
This is my modelling of a standard snap-fit garden hose connector, combined with a 1-inch BSP screw fitting - as often used to connect to garden water pumps. (Note: the hex bolt for tightening was sized to match the outer diameter of the…
Wydruk około 1,48 €–1,80 € nettoWstępna wycena jednego wariantu
While you are staying safe at home, you might have something break that you'd typically go buy a replacement or perhaps a repair bracket for. (For example, the snack drawer's increased contents and enthusiastic children might result in…
Wydruk około 0,44 €–0,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Buffer space hook which allows screwing the buffer to the wall.
Wydruk około 0,87 €–1,06 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Cable Clips in different sizes: 1 x 3 mm 1 x 4 mm 2 x 4 mm 1 x 6 mm 2 x 6 mm 1 x 8 mm Printing Parameter: Material: PETG Resolution: 0.2 mm Perimeters: 3
Wydruk około 0,64 €–0,78 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hi all, this is a Mount for Amazon Alexa Echo Dot 5th Generation. You can slide the power plug into the mount and then plug it into the socket. No need for screws or glue. Supports are only needed for the cable holder. This is my first…
Wydruk około 4,00 €–4,88 € nettoWstępna wycena jednego wariantu
Helps you stack two or more IKEA LACK tables on each other without screws. Print instructions This is a IKEA LACK table mount for stacking two (or more) tables on top of each other, without screws. Feel free to remix this, but please…
Wydruk około 1,21 €–1,48 € nettoWstępna wycena jednego wariantu
⚠️ A completely new version available ⚠️ see: https://www.prusaprinters.org/prints/27181-prusament-screw-top-container-v2 Dominik made very nice containers from Prusament spool cores. However, I didn't like that the top cover is…
Wydruk około 2,15 €–2,62 € nettoWstępna wycena jednego wariantu
The magnets are inserted into the clip during two pauses that are preset in the print profile (two magnets at each pause). After the magnets are inserted, you must manually resume printing. Printer stops at layer 142 and 314. This…
Wydruk około 1,24 €–1,52 € nettoWstępna wycena jednego wariantu
Print it as it is aligned in the STL file to be able to print it without support and still have a strong hook with long lines. Aligned at 45 degrees on the bed, 0.4mm nozzle, 0.2mm layer height. 3 walls, you can add more if you want an…
Wydruk około 1,47 €–1,79 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Holds the square Xiaomi temperature and humidity sensor. (I think this is the Aqara version?) It mounts with a common drywall screw, or with a zip-tie. (There's a flat bit at the top of the screw hole to make zip-tie mounting a little…
Wydruk około 0,41 €–0,50 € nettoWstępna wycena jednego wariantu
This is a regular old egg that unscrews to reveal a hidden compartment. It could be used to store candy for an Easter egg hunt, or to hide very small quantities of treasure.
Wydruk około 2,87 €–3,51 € nettoWstępna wycena jednego wariantu
This screwdriver is designed to allow the use of any standard bit in otherwise impossible to reach places. Additionally, it has an adjustable handle allowing you to change the tool's overall length, providing extra reach and more leverage…
Wydruk około 0,50 €–0,61 € nettoWstępna wycena jednego wariantu
10mm Screw and Nut with a tight Lead-Thru-Hole for 4mm PTFE-Tubes
Wydruk około 0,98 €–1,19 € nettoWstępna wycena jednego wariantu
This is a remix of johnzanussi's Williams Screwdriver Bit Holder. I liked the original bit holder a lot, but it didn't hold my bits tightly enough. So I made a couple improvements to hold the bits more securely. Compared to the original:…
Wydruk około 0,45 €–0,55 € nettoWstępna wycena jednego wariantu
These plugs help to close the Core one L 3mm screw holes on the sides and on the upper edges of the printer :) Print settings: - 0.15 Structural (recommended otherwise won't fit) - PETG (but PLA should be fine as well) or TPU 85A. When…
Wydruk około 0,05 €–0,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A simple wall mounted 2 row screwdriver holder. Easy to print and mount on the wall. Enjoy
Wydruk około 5,50 €–6,72 € nettoWstępna wycena jednego wariantu
Buffer space hook which allows screwing the buffer 10° angled.
Wydruk około 1,27 €–1,56 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A simple holder for the fours Align Hex Screwdrivers HZ024 to have them handy and organized on the IKEA Skadis board. It uses two of the universal hooks ( Skadis_Universal_Hook.stl ) from CSD_Salzburg over at Thingiverse. I designed it in…
Wydruk około 0,99 €–1,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
the original airpot comes with only 2 or 3 srews. if u need more u will find them here SCREW_v2 - is a lot stronger as the previous version if u place a M3x12-20mm screw inside - for use with a 13mm nut or a a coin - is part of another…
Wydruk około 0,23 €–0,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET
We were so keen to get installing our UniFi Protect G5 Dome Ultra cameras with their shiny backboxes, then realised that getting hold of G ¾"-threaded Conduit is a bit of a pain in the UK. We wanted to use standard 20mm PVC conduit, which…
Wydruk około 0,44 €–0,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
One of these bowls will hold the 180 stones of one color for your go game. Nothing pretty, but they get the job done. Screw lid for storage. If you are using the OpenSCAD file, please see this note from der_da : The file is using the…
Wydruk około 1,80 €–2,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Screwdriver with mechanical compartment, with space to hold 16 bits. Printed on location with no supports required. Once printed, to help for the first time the inner body is better extracted. It is recommended to make lateral movements…
Wydruk około 0,50 €–0,61 € nettoWstępna wycena jednego wariantu
I liked the knurling on the original design so I modified it for use with my M3 screws.
Wydruk około 0,09 €–0,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a screw-in anchor that secures a tie wrap to a surface. This kind of part is commonly available at a hardware store, but I didn't have any at home when it came time to hang some holiday lights outside. Designing and printing it…
Wydruk około 0,27 €–0,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I like to have everything at my fingertips (short range), so i have designed things holder for my DeWALT. There are mounting points for hexbits and also box for screw or any other things which you wish to put there. This is quite huge…
Wydruk około 6,24 €–7,63 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This Shelf was made to allow quick-access to boxes of Screws (in my case M3-M8). No Supports needed, ~20% Infill Infinitely stackable due to dovetail joints on top and bottom of each section, the boxes can be bought they are originally…
Wydruk około 8,72 €–10,66 € nettoWstępna wycena jednego wariantu
A simple screw and bitholder you can attach to a Einhell screwdriver using a M4*20mm screw. You have to pause the print at a certain layerheight and put 3-4 Neodym 10*3mm Magnets in.
Wydruk około 0,96 €–1,17 € nettoWstępna wycena jednego wariantu
Camera mount for IKEA LACK with screw for UNC 1/4". This fits all cameras with a UNC 1/4" thread, e.g. Logitech C920, Lenovo 500 FHD or similar. The camera holder includes the following components: - Clamp with screw for attachment to the…
Wydruk około 7,44 €–9,09 € nettoWstępna wycena jednego wariantu
This printable lid turns a large plastic jar into a screw dispenser. Just flip it over and give it a good shake. The shape orients the screws so that they can fall into the slot at the bottom ready for you to take them out without poking…
Wydruk około 6,51 €–7,96 € nettoWstępna wycena jednego wariantu
I used the stl model “z-screw-cover.stl” (Z-Axis) from @Prusa3D. I Scaled down the original cone 99.5%. The rest of the cone has been turned into a cylinder. Reason for Creation The scaling strengthens the parts hold on the acme screw to…
Wydruk około 0,18 €–0,22 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Support pillars threaded and screwable. Support pillars adjustable in height. Settings Value Infill 25% (adaptive cubic) Perimeters 2 Layer Height 0.15 mm Structural Material PETG / PLA Supporting Material organic Comments printed on MK4S…
Wydruk około 1,28 €–1,56 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Overview: This is an addition to the Gridfinity storage system designed by Zach Freedman of Voidstar Labs who “stole” it from Alexandre Chappel. I made this storage box for a DeWalt Ratcheting Screwdriver Set. It uses a 4x2 area of the…
Wydruk około 9,01 €–11,01 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This adapter can be used to make your ABC Design Salsa 4 stroller Screwiverse -compatible. You can then for example attach one of the Tentacle Hooks to it to hang bags or other stuff securely to the handlebar. I haven't tried printing it…
Wydruk około 0,56 €–0,69 € nettoWstępna wycena jednego wariantu
Instructions: (I printed the pictured model in “Lila” colored pla with build plate supports and brim. I used defaults but I could recommend increasing the claw infill to make it a bit more solid) The ‘extender’ goes through the ‘screw…
Wydruk około 4,93 €–6,02 € nettoWstępna wycena jednego wariantu
A screwdriver for removing the focuslens on an Aeon Nova 14 lasercutter. May fit others. Print instructions Category: Hand Tools Summary A screwdriver for removing the focuslens on an Aeon Nova 14 lasercutter. May fit others. Print…
Wydruk około 1,15 €–1,41 € nettoWstępna wycena jednego wariantu
Bitsholder with a strong clamp that is designed to easily slide onto a belt or pocket edge. The bits holder has room for 10 bits and a slot in the end that can be used as a screw driver. The holder has 3 slots for 9.5x9.5x3 square magnets…
Wydruk około 1,74 €–2,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I've an unreasonable fear of the garbage disposal. This hinged cover prevents accidental switch presses. Designed for Leviton screw-less plates, but you can adapt it for other brands using the attached Fusion360 source file. Print in…
Wydruk około 0,96 €–1,17 € nettoWstępna wycena jednego wariantu
This bucket must be printed in vase mode . The outer profile is built of one quite simple profile which is screwed twice, each time in the opposite direction. Based on the steep walls no open layers are to be expected. Since the wall…
Wydruk około 1,77 €–2,17 € nettoWstępna wycena jednego wariantu
Simple hexbit screwdriver with storage box for 4 hexbits. It is really small but still useful tool. There are 2 versions, normal and less tight. Thight version catch bits strong and no magnet is needed. Less thight version need magnet. I…
Wydruk około 0,21 €–0,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
My Print Parameters: Resolution: 0.2 Seam position: Random Infill: any Perimeters: 4 Rafts: No Supports: No Material: PETG I used the M4x30 screw. You can stick EVA foam to increase friction to table.
Wydruk około 0,10 €–0,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Main Body There are 3 different versions available of the root irrigator. One with a short neck, one with a medium neck and one with a long neck. All of those are freely scalable and will work with the accessories (float gauge & cover).…
Wydruk około 0,56 €–0,69 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Update 2025-10-21: After using the corkscrew for a few months I found that the small/short support is not robust enough. It bends too quickly. That is why I modified the bigger support so it gives more hold to the small one. Have a look…
Wydruk około 2,21 €–2,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Update 2025-03-13: See also my “improved” design. (https://www.printables.com/model/1240192-an-improved-better-corkscrew) When you are a waiter, and still crafty, you probably daily use the traditional corkscrew where you hold the bottle…
Wydruk około 1,12 €–1,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a slight modification to Jonas Grimstad's electric screwdriver holder. I noticed the original tool holder was a lot longer than it needed to be so I used the extra space to add a magnetizer/demagnetizer. Can be printed with PLA…
Wydruk około 5,14 €–6,28 € nettoWstępna wycena jednego wariantu
I tried another spool winder but found it finicky and delicate. I designed this winder from scratch to be simple and robust, using the same self reversing leadscrew mechanism found on industrial cable winders Why pick this model: Prints…
This set includes screws, nuts and washers of all kinds ISO 4017 DIN 933 With smaller screws and nuts, it is necessary to set the height as low as possible so that the screw works correctly for example at M3, M4 and M5 The screws are…
Print, assemble and play directly, no screws needed 8-11
🇬🇧 English 🇬🇧 (In 🇫🇷 Français 🇫🇷 at the bottom of the page ) Ideal for your 3D designs, find 3D models of ISO M3 screws L4-L5-L6-L8-L10-L12-L14-L16-L18-L20-L25-L30-L35-L40 in .step files. and their washer and nut. Advice for 3D conception…
This is a remix of the Rod and Tube Cutter for Dremel by GreaseMonkey88 on Thingiverse ( https://www.thingiverse.com/thing:4241055). But after printing I realized that it does not fit my Dremel 4300 (and possibly other large Dremel…
Use case This screwdriver (bit holder) is made for fine to medium duty work. It is made to fit well into the palm of your hand, while still giving you a good grip for your fingers to apply some reasonable torque. Thanks to the clamping…
Hey, since the cleaning with several paper towels has always annoyed me, I have designed this small but helpful tool. You just click it into the Lead Screw and move the Z axis completely. If the lead screws are very dirty, you can repeat…
There already is a plethora of raspberry pi cases on the internet and the last thing we need is yet another one ... well - I created one anyway ... because I wanted to and I had a lot of fun doing it :-). I tried to achieve the following…
caliper size on the cover photo is 78.5 mm Someone posted on reddit asking how a helix screw toy was made but did not have a link to the STL so i reverse engineered it and made my own version. I added the full parametric fusion 360 source…
Update 6. Aug. 2023 The STL ist about an 1cm larger than what you see on the Lavazza photo. You can print it a little bit smaller if you want. Especially if you put you coffee bag into a Kellog's tin can as shown in the background. Update…
Print: On the side
If there is any other type of screw/bolt you need modeled please message me
Maj 30/06/24 : https://www.printables.com/model/927111-anti-pluie-piege-anti-frelon addition test piece anti rain hat suspension Part to test because no more printer working at the moment... fixing with petg wire as attachement Thanks in…
Get the other engines here ! Get the screwdriver here ! Build Video/Instruction Print the weights at a higher infill percentage to actually give them weight (I used 70-80% infill on the weights). This entire print is around 180g of…
This is a Screwless, parametric, sealed, storage box. The Alround Box MINI: https://www.printables.com/de/model/851837-rugged-storage-box-mini-parametric-screwless The box is assembeld with pieces of filament, so screws arn't needed…
I wanted a gridfinity hex bit holder, there are a few available on Printables but none that quite had all of the features I wanted. I found the closest I could and remixed it to make it stackable. In gridfinty language this is 2x2 and 6…
Knurled handle for Socket Head Cap Screw with hexagon socket (Zylinderkopfschraube mit Innensechskant) Fits perfect ISO 4762 / DIN 912 Screws Good little handle for little force For M3, M4, M5, M6, M8, M10 + M2,5 Add a bit of glue to…
Think I'm Awesome? ~ https://buymeacoffee.com/triplegworkshop Easy to print and Assemble Mason Jar Candy Despenser. Only two parts to print, prints with or without supports. Uses one M4x20mm (or similar) screw to attach the knob. Sized…
It can be attached to an opened plastic bag, containing cereal, rice, coffee beans or what ever comes in bags. Printing: Print all parts as you desire. 0.2 and 0.3mm layer hights work fine. The wedges on the hub might curl a little…
This screw box is your perfect maker’s companion for organizing all your hardware. It comes in two sizes: an 80 mm version ideal for standard screws, and a 120 mm version perfect for larger screws and bits. Once mounted on the wall, the…
A tool designed for cleaning 8mm, 4-start, 2mm pitch lead screws, such as those commonly found on the Anycubic Kobra Neo and similar devices. This tool features smaller fins on one side of the clamp, which serve to guide a paper towel…
A wall mount that uses large size velcro command strips instead of of screws. Based on the math I have done, only half a strip on each side is necessary for a standard record, but I recommend using one full strip just in case. This also…
The labels are for these gridfinity boxes: https://www.printables.com/model/592545-gridfinity-bin-with-printable-label-by-pred-parame The bolts are to scale as far as possible. When the screws get too long for the label, the bolt figure…
NEW SIZES AVAILABLE HERE: https://www.printables.com/model/778060-screwu-nit-hardware-organizer This is a reimagined remix (HUGE UPGRADE) of the great Modbot Voron Hardware Organizer. (More Drawers can be found on Thangs) PRINT SETTINGS:…
If you want to support me you can now nominate me and my designs for the Printables Awards 2025! :) Organize your setup with the Universal Cable Guide , perfect for managing cables up to 5 mm in diameter. Designed for easy installation…
A small cylindrical container with a lid that screws inside the top. A generic small container for a travel essentials contest seemed a bit of a stretch, but I actually did take one or two similar containers on my last few vacations for…
I really liked nobodyinperson 's idea.. I didn't like that the notches were visible and decided to make my own remix. CONCEPT The concept is as follows (for those who are seeing this for the first time): The insert is slotted in 6 places…
Clean your z-axis lead screws easily with this cleaner. Just put a piece of paper towel around the screw and snap the tool around it. Use the Z-movement option in the menu for easy cleaning. Printed with: 0.2mm layer height PLA or PETG…
I wanted a holder where I could grab just the driver and bit set I wanted, so I came up with this! The main 1x6 driver holder can optionally hold two rows of bits around the shank of the driver, or you can use the 1x1 bit trays if that's…
Round containers with a practical screw-on lid, available in 60x40, 70x40, 80x40, 90x40, and 100x40 sizes. Perfect for storing 3D spare parts, or small tools , keeping them neatly organized and securely sealed. Choose from a variety of…
🧰 Screw Organizer Box for Repairs & Disassembly 📦 Description This 3D-printed screw organizer is designed to help you keep screws, bolts, washers, and small components neatly sorted while working on electronics, machines, or furniture.…
Remake : Damon Cui's remix Original : DaFizzlesz I made a different model from the original version.
This model was inspired by: https://www.thingiverse.com/thing:4744855 I've made this bag clip so it's big enough to use on cereal bags. The maximum length of a bag you can clip this on is around 160 mm. The diameter of insert is 50 mm.…
I was looking for a simple, hands-free way to clean the black soot off the lead screws on my X1C, MK3S and Prusa Mini. To use this cleaner, simply stuff some tissue, paper towel or sponge material in the cavity, douse it in IPA and clip…
Holder to fix velcro stripe or zip tie by screw or glue. usable for: velcro stripe / zip tie / cable tie width: 10 / 20 mm support: not needed (printed on side -> see picture) material: not defined (PETG/PLA used by me)…
I created an easy alignement tool for the back leadscrew of the Prusa Core One. After I finished my build of the Core One I tweaked the front leadscrews using the little helper from user @rinkel.…
I really liked the idea from Boogie for screw measuring/sorting helper but decided to design my own with some of his approach in mind. FEATURES size of a credit card so you can put it in your pocket or a wallet screw sizes M2 - M12 screw…
![[Use M3 screws] Spool holder for Prusa MINI Flexible](https://media.printables.com/media/prints/62910/images/657225_6e3e876b-c636-4d75-9a4a-d73aa241cde4/ming-cheng-wei-she-ding-3.png)
