Prusament Masterspool with real screws
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of zoltanf's "Prusament spool to master spool adapter " For my spool holder i wanted the outside of…
- Ocena
- 4,9 / 5
- Polubienia
- 29
- Pobrania
- 204
- Wydruki
- 9
- Wyświetlenia
- 2216
- Oceny
- 10
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
This is a remix of zoltanf's "Prusament spool to master spool adapter "
For my spool holder i wanted the outside of the prusament spool to remain the same without anything sticking out so this remix has some blocks that hold screws through some of the hexagons outside.
Just insert 4x M3 square nuts, line the flange up correctly (The screws will only line up correctly in one orientation!) and screw in some M3 x 10 or bigger screws. You will find these screws/nuts in your Prusa spare bag.
You can modify the FreeCAD file but be aware that the seperate bodies are not fused in FreeCAD but rather the stls have been fused outside since the original model has too many faces to be converted into a solid in FreeCAD and then fused.
Prusament simplified flange was imported to the FreeCAD project so i didn't have to measure the hexagons.
Print instructions
Gcode will work for MMU2s and regular MK3s printers.