Ubiquiti Unifi AP stand (All in 1, NO SCREWS needed!) - Updated: LR / Pro / Nano / Lite
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
1,63 € – 1,99 € netto (bez VAT)
Dla pliku: Unifi AP stand Nano-Lite_0.4n_0.2mm_PLA_MK4IS_1h16m.bgcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 1,81 € netto (środek widełek).
- Masa podana przez autora
- 34 g
- Czas druku podany przez autora
- 1,27 godz.
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Complete stand + mounting adapter for Ubiquiti Unifi APs The model is conveniently printed as one piece.
- Ocena
- 5 / 5
- Polubienia
- 92
- Pobrania
- 1206
- Wydruki
- 16
- Wyświetlenia
- 3457
- Oceny
- 13
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
UPDATE 20.1.2024 - added versions - AP: LR / Pro / Nano / Lite
Complete stand + mounting bracket for Ubiquiti Unifi AP.
The model is All in one, so it can be printed as one piece without need for screws. You just click it on.
In the 3mf file has a negative object inside so that the model prints much faster, needs less filament and also helps with cooling of the AP. (they tend to be very warm 24/7)
You would need to enable supports, but only around the ring.
For the LR / Pro version - if its too tight for you, just scale the model down to 99,5% (deducts exactly 1mm in diameter which is plenty, or print it scaled down right away to be sure.
Please give the model a like if youre happy with the model! …and post us your photo too! 🙂 ❤