T-Nut for 3030 Series Aluminum Extrusion, M4 Screw Prusa XL
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed to attach something to the aluminum extrusion of my Prusa XL printer.
- Ocena
- 4,75 / 5
- Polubienia
- 17
- Pobrania
- 161
- Wydruki
- 3
- Wyświetlenia
- 571
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
None of the other models really worked well in the 3030 Series extrusion used on the Prusa XL printer. Either they didn't go in smoothly, or couldn't be removed, or didn't lock in, or just didn't fit. This T-Nut will slip in, then turn and stop as you tighten it. It will also lock into the open part of the channel. When you need to remove it, loosen the screw, line up the T-nut and slip it out.
The hole in this T-Nut is sized to accept an M4 bolt. No metal nut needed - the screw will form decent threads the first time you run the screw in, and then it can withstand a decent amount of stress. You may want to run the screw into the T-Nut once fully before actually installing the assembly into the extrusion.
The .bgcode file is for a Prusa XL using Prusament PETG filament. But you can print it on pretty much any printer, 0.2mm layer height, no supports.